HomemadeTurbo - DIY Turbo Forum
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Engine Management (https://www.homemadeturbo.com/engine-management-10/)
-   -   3 Bar Xenocron Now Doesent Run (https://www.homemadeturbo.com/engine-management-10/3-bar-xenocron-now-doesent-run-80287/)

Inquisition 07-17-2007 02:15 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Put a volt meter on the sensor. Make sure its outputting about 1.8V with the key on. This is obviously on the signal out pin/wire.

My honest guess is you didn't wire it correctly, the sensor itself is defective, your settings in Crome are wrong, or the mounting of the sensor resulted in breakage. The way that sensor is mounted really makes me cringe. I would never mount that sensor anywhere but in the cabin of my car with a very small diameter vacuum line ran to it.

ghettoturbo 07-17-2007 03:00 PM
Re: 3 Bar Xenocron Now Doesent Run
 
+1 on you pushing too hard on the sensor to get it in there...double check the other side of the board to see if its ok

imburne 07-17-2007 03:24 PM
Re: 3 Bar Xenocron Now Doesent Run
 
The sensor is actually fine. I know it looks slammed in there but its not.

imburne 07-17-2007 08:53 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Any other suggestions before I fist myself?

ososlohatch 07-17-2007 09:12 PM
Re: 3 Bar Xenocron Now Doesent Run
 
g.m. 2.5 it looks like you can afford one

imburne 07-17-2007 09:18 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Originally Posted by ososlohatch
g.m. 2.5 it looks like you can afford one
Why do you think I can afford one?? Because my engine is full of cdm bling? Actually I need something like asap. I cant even driving this bitch now.

Anyone in the La, CA. area have a 2.5 or 3 bar f/s?

SpankedYA! 07-17-2007 09:37 PM
Re: 3 Bar Xenocron Now Doesent Run
 
So you contacted Chris? What did he say?

imburne 07-17-2007 09:51 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Se said..

Originally Posted by Xenocron
I will be on vacation from July 17th - July 31st, traveling all day on Tuesday July 17th I will not be able to check emails for a day or so until I get settled as I will be in a fairly remote location.

As soon and as often as I can, I will still be responding to emails throughout the 2 weeks and my employees will be in daily to handle the shipping and order processing operations.

Please call or email the shop if you have an immediate concern or need and speak with Ian or Jay.

973-846-7872 - Office Phone
customerservice@------------- - Office Email
Trying to find a alternative right now.

Inquisition 07-17-2007 10:16 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Faggot, have you run a volt meter on the damn sensor? If not, ------- yourself isn't the solution. Instead you should drink battery acid. Seriously, if you don't know how to use a volt meter and can't figure it out, you should quit playing with cars ASAP.

ghettoturbo 07-17-2007 10:28 PM
Re: 3 Bar Xenocron Now Doesent Run
 
Originally Posted by imburne
Se said..

Trying to find a alternative right now.
send an email to customer service...ian and i will try to help you tomorrow once you rule out any kind of wiring problems as the cause


All times are GMT -5. The time now is 04:41 AM.
Page 2 of 4
1
2
3
4
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands