WTB JDM D15B VTEC OIL PAN
 

As the topic states, i need a JDM D15B VTEC Oil Pan.

Re: WTB JDM D15B VTEC OIL PAN
 

dude, ask for a z6 oil pan, its the same thing.

Re: WTB JDM D15B VTEC OIL PAN
 

i just went through this on another board bro. its not the same thing. I had to rip the entire turbo setup off of my car because the z6 oil pan is too shallow for the D15B pickup. I was getting Zero oil pressure due to the difference in pans.

Not the same at all. So anyone reading this, if your going to install a z6 oil pan on your JDM D15B thinking its the same, save yourself the trouble and DON'T USE A Z6 pan BECAUSE ITS NOT THE SAME.

-KENNy

Re: WTB JDM D15B VTEC OIL PAN
 

hey man, you must have had a bent pickup tube or something. seriously, all obd1 vtec pans are the same. z1/z6/d15b i have used one without any problem. maybe the z6 pan you where using was dented a little??? i dont know, all i know is they are the same.

Re: WTB JDM D15B VTEC OIL PAN
 

it was not dented at all.. my pickup on my d15b is perfectly fine. After taking off the Z6 oil pan and replacing it with my original D15B oil pan all my oil pressure came back to normal and every thing ran fine.

I spoke with two different people who had the same problem, both of their findings were identical to mine, the Z6 pan doesn't allow the D15B pickup adiquite space to grab oil.

I wish it did work bro' i'd be boosting already.

Re: WTB JDM D15B VTEC OIL PAN
 

you just have to swap the pick ups, im using my sohc zc pan on my z6 , with my pick up.


look atthe pick ups nex to each other. theres your difference.

Re: WTB JDM D15B VTEC OIL PAN
 

ah, yes, i did use a z6 oil pump and pickup as well, thats why it fit.