WTB D16a6 cast mount bracket
 

i am in need on a d16a6 driverside mount bracket. the cast iron piece that bolts to the block and then the mount bolts to that. it looks like this (i dont know what either of these came from, but i need one from a d16a6)

give me a shipped price to FL 32084

http://www.1993-honda-civic.com/imag...swap_01795.jpg

Re: WTB D16a6 cast mount bracket
 

If that one on the right with 2 studs and a bolt hole has 2 holes that mount it to the block.

I'll trade you for 2 bolt that you need

Let me know and I'll ship first thing monday and when you get it if its what you needed you can mail me the one on the right ;)

Re: WTB D16a6 cast mount bracket
 

i dont have either of those. it was a pic i found on google just to give an idea of what i need since i didnt know what to call it. i only have z6 brackets

Re: WTB D16a6 cast mount bracket
 

Ok

I need the Z6 mount that goes on the timing belt side, the one on the right! If thats what you have we still have a deal iif you want!

I'm gonna take a ---- and get a coffee, so after that I'll post pics of what I got so you can see!

Re: WTB D16a6 cast mount bracket
 

i have a z6 mount i will trade for an a6. it better be an a6 though or i will throw it though your front door. O0

Re: WTB D16a6 cast mount bracket
 

OK

This is what I got!

Attachment 9838

Attachment 9839

Attachment 9840

Attachment 9841

Attachment 9842

Top one is A6 mount and the other is off a D15B7, do you see the difference?

Are you using an ef body or eg?

Re: WTB D16a6 cast mount bracket
 

i have an eg with an a6 block in it. the z6 mount works ok, but it cocks the mount funny and because of that the engine sits a little too high and i cant put my p/s bracket on

Re: WTB D16a6 cast mount bracket
 

so, after some research, it seems that i need a d15b7 bracket and not an a6.

Re: WTB D16a6 cast mount bracket
 

So what do you what me to mail you? The B7 ---- right! Do you need both the mount and bracket?

I will mail it tommrow if you PM me the addy!

I will also PM my addy for you to mail me just the Z6 bracket.

So let me know if we have a deal for a straight trade and I pay shipping to you and you pay to ship mine to me.

;D

Re: WTB D16a6 cast mount bracket
 

It looks like I am going to have to make one to be perfect. I can't find any solid info on which bracket to use with an a6 block on an eg.

Re: WTB D16a6 cast mount bracket
 

I had an a6 in my coupe for a few weeks and I used the b7 mounts, thats why I asked what year your car was. :6


Took the motor out cause it smoked! :-[

Re: WTB D16a6 cast mount bracket
 

I did that swap like 10 years ago due actually we use to do it alot. sohc zc obdo=d16a6 with a cam were 200 bucks and a nice upgrade for dx d15b7's

Re: WTB D16a6 cast mount bracket
 

My only reason for doing it is cause I came across a good a6 block with a good crank so no machine work was needed. I didn't want to make the sleeves any thinner than stock and I didn't want to turn a crank either.

So the b7 bracket will make the engine mount sit level and also let me run powersteering? If that's 100% then I will trade an extra z6 bracket I have for your b7 bracket towdogg

Re: WTB D16a6 cast mount bracket
 

I wish mine didn't smoke.

Chris any used ZC pistons with rods and rings? That should slap in an A6 right!



IDK I took my PS out

You might need lx PS bracket

Re: WTB D16a6 cast mount bracket
 

Maybe someone can confirm what will be needed. I don't have a problem making one, but sometimes it's nice to just bolt something in.

I have a good set of a6 pistons a rods. Pulled out to be replaced with vitaras and TT rods

Re: WTB D16a6 cast mount bracket
 

No I want the ZCs ;)


You know after thinking about it, It will work cause the B7 came in the LX also and that had PS

The mounts I have will work

Re: WTB D16a6 cast mount bracket
 

gsr bracket

Re: WTB D16a6 cast mount bracket
 

They will be in the mail tomrrow

Re: WTB D16a6 cast mount bracket
 

i just thought about it, are you expecting me to send you a bracket and a mount? i only have a bracket to spare, i dont have any spare mounts

Re: WTB D16a6 cast mount bracket
 

No I don't expect the whole thing just the bracket with 2 studs and a hole on top, and 2 that mount it to the motor. :)

Re: WTB D16a6 cast mount bracket
 

i dont have one with a 3rd hole in it. mine just have the 2 studs and thats it

Re: WTB D16a6 cast mount bracket
 

I need the one on the right!

Re: WTB D16a6 cast mount bracket
 

the one i have is like the one circled in blue. mine isnt angled like that though

Attachment 9604