WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
Yeah I have a 90 HF, and it was built for a nitrous set up. I'm tired of being slow, unless I have a button nailed. I have began to develop a mock-up for my a6. But there's a few problems, heh .... I don't have a car to put the engine in, and I lack a few essential items. I would like a 90-91 CRX Si, or civic hatch Si. But preferably an Si. Or anything wired for MPFI for that matter.
I need pretty much a whole kit, minus the actual turbo and charge piping and intercooler. I'm not SUPER familiar with Honda turboing, but it can't be too different from what I'm used to. I have stuff for trade also (alot of nitrous stuff, from old nitrous car), and I'm new to this site. Any help would be greatly appreciated. Thanks. - Matt |
Re:WTB: SAFC/450s and Si shell ***
what do you have to trade
|
Re:WTB: SAFC/450s and Si shell ***
Anything in particular you're looking for? I have ....
Turbo stuff: *MONSTER (too big if you ask me) Audi interooler - failry good shape *A TDo5H inlet housing and exhaust downpipe attachment *Sounds kinda goofy ...... but I did my charge pipe fittings with PVC pipe, just to see how long everything would need to be, and I have the mock set-up of the routing of a D16a6 turbo set up with a front mount. Maybe someone will find it useful. Engine things: *A set of NEW (4) SRP forged pistons. They have a 9:1 compression ratio, and are part # 149200. They are for a D16Z6. The story behind these pistons is the guy that built the bottom end for my 16 bought these at a consignment shop, and looked up the part # for the pistons. They were for a Z6, and he wasn't sure how they would be in an A6. "Better safe than sorry," He told. So when I picked up my block, I bought them from him, and now have them. they are BRAND NEW. *Various D-series stuff. Just ask. Everything from battery trays to heads. * And I have about anything nitrous you can think of. I understand that nitrous is looked apon by most as something stupid, or 'ricey', but I ran with some nitrous cars that would smoke the ---- out of pretty much anything blown or blow'n. No offense. I have bottles, nitrous gauges, steel braided hoses, NX and NOS shot nipples, switches, switch boards, mounting brackets, solenoids (fuel and nitrous), just ask. Thanks for any help. - Matt |
Re:WTB: SAFC/450s and Si shell ***
are the pistons stock bore or oversized
|
Re:WTB: SAFC/450s and Si shell ***
The bore is 2.963. The weight is 233. That's all I can tell you, that's what's on the sheet that SRP sent me. Thanks for interest.
|
Re:WTB: SAFC/450s and Si shell ***
Things for trade are as follows:
*89-91 DC rear lower tie - Great condition *A pair of stock 90-91 CRX corner lenses - Good condition *A set of of 90-91 stock CRX tails - All three peices - Maybe a crack, but alright overall *A set of 90-91 CRX or Civic head lights with brackets - No cracks, look great *D-series valve cover, not 16V version *Cherry Bomb Turbo II exhaust - Still in Box - Brand New!! - Single in / Single out *Set of (4) Blaupunkt 6 1/2s. Came out of My CRX - Surprisingly good sounding for 6 1/2s *Ground wires - Custom made for CRX D-series chassis to accomidate battery relocation - 6 gauge - Gold-plated terminals - Red *K&N drop in Filter for stock 88-91 airbox. I'm sure it will fit others too - Needs cleaning *Venom High-Flow peroformance fuel rail. Made for B18 LS, but might fit others - Painted flat black *---- load of nitrous stuff (NX and NOS solenoids, ZEX 10# bottle, stell braided lines with Earl Competition fittings, AutoMeter nitrous gauged with auxillary light, WOT switches, just ask) *D15b2 block ...... could be useful. Again, this is JUST a trade list. I'm not interested in selling, I just want to get a kit together. Anything that you might want, just IM me about. Thanks - Matt |
Re:WTB: Almost COMPLETE kit - TRADE LIST***
(((((((((BUMP)))))))))
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
do you have a d16z6 oil pan??
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
Sorry bro, no D16Z6 pan here. If I listed one, it's a mistake. Sorry.
|
Re:WTB: SAFC/450s and Si shell ***
Originally Posted by smokey_civic
Anything in particular you're looking for? I have ....
Turbo stuff: *MONSTER (too big if you ask me) Audi interooler - failry good shape *A TDo5H inlet housing and exhaust downpipe attachment *Sounds kinda goofy ...... but I did my charge pipe fittings with PVC pipe, just to see how long everything would need to be, and I have the mock set-up of the routing of a D16a6 turbo set up with a front mount. Maybe someone will find it useful. Engine things: *A set of NEW (4) SRP forged pistons. They have a 9:1 compression ratio, and are part # 149200. They are for a D16Z6. The story behind these pistons is the guy that built the bottom end for my 16 bought these at a consignment shop, and looked up the part # for the pistons. They were for a Z6, and he wasn't sure how they would be in an A6. "Better safe than sorry," He told. So when I picked up my block, I bought them from him, and now have them. they are BRAND NEW. [b]*Various D-series stuff. Just ask. Everything from battery trays to heads.[/b] * And I have about anything nitrous you can think of. I understand that nitrous is looked apon by most as something stupid, or 'ricey', but I ran with some nitrous cars that would smoke the ---- out of pretty much anything blown or blow'n. No offense. I have bottles, nitrous gauges, steel braided hoses, NX and NOS shot nipples, switches, switch boards, mounting brackets, solenoids (fuel and nitrous), just ask. Thanks for any help. - Matt |
Re:WTB: Almost COMPLETE kit - TRADE LIST***
considered selling anything nitrous?
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
Like I said, I would RATHER trade, because the money I get from selling stuff is just going to go back into a kit. What are you looking for? Sorry I was no help on the Z6 pan. Let me know. Thanks. - Matt
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
How much for the SRP slugs?????? sorry cant offer anything for trade... just unloaded all my turbo stuff...
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
Are you talking about how much cash? I'm not sure. There are two people (one local) that are interested. I'll be able to tell you soon though. Thanks. - Matt
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
((((((( BUMP )))))))
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
Alright, I have gathered the majority of my nitrous stuff, and came out with 1whole kit (wet) and 3/4 kit (wet). Both lits are 100% gaurnteed to work, I know, I have used them on my nitrous rex. Thanks. - Matt
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
(((((( BUMP ))))))) I don't need very much now. Somone help me out.
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
I've got a blitz BOV already mounted on 2" pipe 450cc DSM injectors, a t-3 turbo (off a VW) and an intercooler from a starion, if you want to work out some sort of trade for that wet kit (I'm more than willing to throw in some cash) PM me
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
PMed AND e-mailed you. Still lots of stuff. Oh yeah!! I just bought the climate control, center console, and wheels out of a 90 CRX Si in a yard. Anyone need anything like that?
|
Re:WTB: Almost COMPLETE kit - TRADE LIST***
((((((( BUMP )))))))
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
(((((( BUMP for badly needed ----!! )))))))
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
i got vx manifold and t3 adapter plate erollinablunt@hotmail.com
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
I replied let me know. Thanks. - Matt
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
Still need manifold and T3 plate ....... and oil feed line kit. This is ALL I need to do my swap ...... someone help me out. Thanks. - Matt
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
iv got a greddy manifold and other stuff. look at my thread.
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
I read on your for sale posts that some ---- wad totaled your car. Are you still looking for this stuff?
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
Yeah ...... I am now buying a CRX that need some help. Hopefully I can get all that I need. What you got Stealthmode? Thanks.
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
Oh, I have oil lines!!! I saw your ic for sale and thought maybe you would want to make a trade or something, but then I saw how your car was wrecked, so I wasn't sure which was more up to date, needing stuff/selling stuff(car wrecked) ;)
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
PMed you brother. Let me know.
|
Re:WTB: D-Series Manifold, T3 Plate, AND Oil Feed Line KIT!!!
You still need a T3 plate? I got one for ya
Could you mail me a pic of the Audi intercooler? What else do you need besides a manifold.... |
All times are GMT -5. The time now is 04:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands