02_z_x_3

I think it means the turbos maximum efficiency is 300 hp. thats probably the sweet spot on the turbo and its boost level. turbos work best at a certain level

BadBlackX

How much?

BoostGear

kenny@kennypowersmotorsports.com

Dude has lots of used 14B's and T25's laying around usually, does a lot of DSM work.

Tony.Anderson

Don't go for the used Turbos. I got used one and that was flawed. Apparently, it was looking new.

BoostGear

Apparently?

I am batting around 8 for 10 with used turbos, most of them being Mitsubishi 14B's and 16G's. Of those 2 that were not working properly, only one could not be rebuilt, the other needed seals and balanced and it's still running on a civic 2 years later.

To the original poster, if you have a choice between a Mitsubishi style 14B / 16G style turbo and Mitsubishi/Garrett T25 (all from DSM's), get the mitsubishi turbo (14B / 16G), it will last you longer.

cpoindexter

I have a garrett that is a t3 .42/.63. The rear seal is apparently leaking. I will sell it for 150 as is or 300 fully rebuilt obo

Tarzan

It has a 60 compressor, and a .48hot side. Comes with a drain tube and inlet fitting in pictures. This turbo sells new for 830.00 .. Price is 300 shipped.... Contact number is 270-564-7408


Part Number: SC3227E
Max Rated HP: 480
Inlet/Outlet Size: 3"/2"
Bearing System: 360 Race
A/R Ratio: .48 or .63
Garrett Compressor Wheel Trim: 54
Garrett Turbine Wheel Trim: 69

Garrett Compressor Wheel Specs:
Wheel Trim: 54
Wheel Diameter: 55mm
Wheel Inducer: 2.170" (55.1mm)
Wheel Exducer: 2.950" (75mm)

Garrett Turbine Wheel Specs:
Wheel Trim: 69
Wheel Style: T31
Wheel Inducer: 2.559" (65mm)
Wheel Exducer: 2.121" (54mm)

WORPeclipse

I have a great dsm t25 I'm pullin off my Del Sol cause im goin bigger. Spools at full boost by 3000 with my d16z6 sohc. I'll take 150 for it. If you want the t3 to t25 flange adapter I'll do 175 for both.