NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
12-11-2003, 10:46 AM
#1
Guest
Posts: n/a
NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
I got the 450's but i need something to controll them! i need the safc, smc, or if someone could chip my ecu that would be great! i have a 91 crx si (pm6) with a T3 at 8-10psi. let me know cuz I REALLY NEED A BETTER FUEL MANAGEMENT!!!!
12-11-2003, 01:26 PM
#3
Guest
Posts: n/a
Re:NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
ok, what program would you use/recommend?? which is also easy to tune!? i would have to download the program right? i dont know too much about using the programs to run the chipped ecu but i know its better than an fmu 
12-11-2003, 02:25 PM
#4
0.0 BAR
Join Date: Sep 2003
Posts: 0
Re:NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
What program you use depends soley on what OBD your car is. OBD0=TurboEdit, OBD1=Uberdata. thats pretty much the way things are breaking down at this moment. If you are OBD2 you will need to do a conversion harness and an 0bd1 ecu i believe.....
Either turboedit or uberdata are pretty easy to use as long as you have access to a wideband you should be able to get a good tune
Either turboedit or uberdata are pretty easy to use as long as you have access to a wideband you should be able to get a good tune
12-11-2003, 10:47 PM
#5
Guest
Posts: n/a
Re:NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
a wideband 
, sorry bro but i dont got money for that right now although i wish i did! i dont anyone either and the shops around here suck ***! they're all ******!!!! but anyways, i stated it was a 91 crx with is obd0. turboedit eh... i'll check into it 
, sorry bro but i dont got money for that right now although i wish i did! i dont anyone either and the shops around here suck ***! they're all ******!!!! but anyways, i stated it was a 91 crx with is obd0. turboedit eh... i'll check into it
12-12-2003, 01:21 PM
#9
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re:NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
Originally Posted by greddycrx
well i really would like for someone to socket it and burn the chip on there too so all i have to do is connect and tune!
12-13-2003, 11:49 AM
#10
Guest
Posts: n/a
Re:NEED SAFC/ SMC/ OR SOMEONE TO CHIP MY ECU!!!!!
damn, its cuz i dont have a pom burner and i know right now turboedit is not finished with datalogging so i would have to burn chips all the time to change settings right? ah man, i'll probably just get the afc then....anyone got one to sell?
