Garrett Outlet 2-3" / 5 bolt downp with waste welded / t3 .60 inlet adapt

Reply Subscribe

Thread Tools

Search this Thread

11-09-2005, 11:53 PM

formsim

0.5 BAR

Thread Starter

Join Date: May 2005

Posts: 76

Garrett Outlet 2-3" / 5 bolt downp with waste welded / t3 .60 inlet adapt

All the below is for a .48/.60 t3 garret
Looking for a compressor outlet piece like the ones shown below or similar. can be anywhere from 2-3"

Looking for 5 bolt t3 downpipe with the wastegate area welded into the downpipe instead of being blocked off. (below is of evo 5 bolt but you get idea)

Inlet flange for a turbo so i can mount a filter onto inlet.

11-11-2005, 03:58 PM

whiterice

3.0 BAR

Join Date: Jun 2003

Posts: 3,975

Re: Garrett Outlet 2-3" / 5 bolt downp with waste welded / t3 .60 inlet adapt

Quote:

Originally Posted by formsim

Looking for 5 bolt t3 downpipe with the wastegate area welded into the downpipe instead of being blocked off. (below is of evo 5 bolt but you get idea)

if the downpipe was built like that on a t3, you wouldn't build boost.
that piece only works if the flapper is built into the turbine housing.

11-11-2005, 06:01 PM

staticchmbr

1.0 BAR

Join Date: Mar 2004

Posts: 609

Re: Garrett Outlet 2-3" / 5 bolt downp with waste welded / t3 .60 inlet adapt

bump, because im looking for the same compressor outlet

here is an inlet on ebay:

http://cgi.ebay.com/ebaymotors/3-Gar...13140157QQrdZ1

its about $ 40 and 2 days left.

11-12-2005, 02:31 PM

formsim

0.5 BAR

Thread Starter

Join Date: May 2005

Posts: 76

Re: Garrett Outlet 2-3" / 5 bolt downp with waste welded / t3 .60 inlet adapt

Quote:

Originally Posted by whiterice

Quote:

Originally Posted by formsim

Looking for 5 bolt t3 downpipe with the wastegate area welded into the downpipe instead of being blocked off. (below is of evo 5 bolt but you get idea)

if the downpipe was built like that on a t3, you wouldn't build boost.
that piece only works if the flapper is built into the turbine housing.

Ya know i thought about it and ya right... another noob mistake ;-) was forgeting the flapper i got now is on the stock downpipe. Wish i could use it but the dam thing would be pointing right at the block when mounted makin it impossible for me to build a downpipe