38mm wastegate fire ring
 

So i misplaced the fire ring for my wastegate somewhere. The O0 on ebay don't want to sell them individually. This is holding me back from boost. anyone have one? pleeeeeeeeeeeeeez?

http://i225.photobucket.com/albums/d...yev/ad8b_1.jpg

Re: 38mm wastegate fire ring
 

Are u Ukrainian? You name sure says so.

Re: 38mm wastegate fire ring
 

I can sell you with a XS Power wasegate that I had before, and a dump tube. The wastegate good working condition, we had it on my brothers sleewed GSR.

Re: 38mm wastegate fire ring
 

check this one, I always buy from them:
http://www.atpturbo.com/Merchant2/me...gory_Code=WGT2

Re: 38mm wastegate fire ring
 

Why ukrainean maybe he's Russian or Moldovian...

Re: 38mm wastegate fire ring
 

No i'm not Ukranian, i'm purebred Russian :P

Re: 38mm wastegate fire ring
 

uhh how much, what does it look like?

Re: 38mm wastegate fire ring
 

I'll send you some pictures morrow, It has the fire ring, I told you its XS Power 35/38mm, worked fine when pooled. We pooled because we bought gt2871rs they cames with internal wasegates.
Why dont you buy that ring from that webside I give you?

Re: 38mm wastegate fire ring
 

You sure they will sell me the fire ring individually? and i looked on ebay, xs power only had the 4 bolt wastegates, not the 35/38mm

Re: 38mm wastegate fire ring
 

they seling them, look again:
http://www.atpturbo.com/Merchant2/me...gory_Code=WGT2

Re: 38mm wastegate fire ring
 

!
I want to give you a big wet smooch smack straight on the lips!! :-* I have been looking for these for a while now! :o You sir have made my day (or evening actually)!

Re: 38mm wastegate fire ring
 

I actually might still need that xs pwr wastegate you are offering me, since i needed that fire ring for my brothers wastegate. When he boosts his B20, he will need his stuff back :l

Re: 38mm wastegate fire ring
 

ok, all send you some pictures tomorrow

Re: 38mm wastegate fire ring
 

WTF is that ---- :l

Re: 38mm wastegate fire ring
 

That is the sound of one happy/grateful O0

Re: 38mm wastegate fire ring
 

Sounds slightly gay.


The old school SSAC/XS Power Tial 38mm knock offs use the same fire ring as the TiAL 38mm. The new "big hat" TiAL 38mm knockoffs I've seen recently use a slightly different fire ring. Buyer beware.

Re: 38mm wastegate fire ring
 

wow

Re: 38mm wastegate fire ring
 

100% no gayness guaranteed. I bought that fire ring yesterday, i am hoping with my fingers crossed that its the same. The knock off WG i have is pretty old, so i have hope.

Re: 38mm wastegate fire ring
 

I saw my first "big hat" three weeks ago, so it's a pretty new thing.

Re: 38mm wastegate fire ring
 

guess i'm safe then.

Re: 38mm wastegate fire ring
 

You still want it?

https://i330.photobucket.com/albums/...g/IMG_0189.jpg
https://i330.photobucket.com/albums/...g/IMG_0188.jpg
https://i330.photobucket.com/albums/...g/IMG_0187.jpg

Re: 38mm wastegate fire ring
 

That dump pipe looks nasty. And yes i want it. 50 shipped?

Re: 38mm wastegate fire ring
 

Oh, it wont came with dump tube. and PM me yout address.

Re: 38mm wastegate fire ring
 

pm sent

Re: 38mm wastegate fire ring
 

request sent

Re: 38mm wastegate fire ring
 

so what are you driving? any pictures?

Re: 38mm wastegate fire ring
 

http://i225.photobucket.com/albums/d...v/IMG00503.jpg
http://i225.photobucket.com/albums/d...v/IMG00542.jpg
http://i225.photobucket.com/albums/d...v/IMG00502.jpg
well, thats my ride. single cam D16Y8 completely stock. And the best i ran was 16.1, that 16.3 is deceiving (don't mind my finger). I have a built D16Y8 with Vitara pistons and H-beam rods sitting on an engine stand, almost ready to drop in. I just need to finish my oil drain. Fittings for the Garett T25 are a pain to find. Why T25? it will let me keep my a/c while its still hot.

Re: 38mm wastegate fire ring
 

Well its a hatch....Looks cool. If you use a biger turbo you could go easy 20psi and up with vitara pistons. Any way keep as posted

Re: 38mm wastegate fire ring
 

Once it gets cooler, i'm throwing on a china t3/t4 and upping the boost to 20. It should be good.

Re: 38mm wastegate fire ring
 

Whoa, you broke deep into the 16s.

Re: 38mm wastegate fire ring
 

Thats cool, Chinesse turbos aren't that bad, I had one for a year on my LS engine then I sold it to my friend, he put it in his sonc, now he has it for couple month, no problem at all, spools very good.

Re: 38mm wastegate fire ring
 

Do i sense sarcasm in JD's post?

And some of those china turbos are indeed very good. My brother has one that was used on 3 turbo setups already, works perfectly. I'll just take his when winter comes around. But lets say i wanted a genuine turbo to support 20 psi on a Y8? What should i be looking for?

Re: 38mm wastegate fire ring
 

I would say T3 57 trim or P trim, those are hard to find in garrett for cheep, but china one shoud be easy...
Check what people says about my garrett turbo...its redicules... :7

Re: 38mm wastegate fire ring
 

I'll look into it, but cold weather is still a couple months away, so no big turbo for me yet. But i could care less about people bashing china turbos. From my experience, they work perfectly fine.

Re: 38mm wastegate fire ring
 

You keep saying the most interesting things.


Good china turbos, and building a Y8 for boost. What would I have to be sarcastic about?

Re: 38mm wastegate fire ring
 

It is just alien for me to not have heard a negative comment yet. So i'm assuming it is a negative comment beautifully masked in sarcasm. I guess i'm too cautious.

Re: 38mm wastegate fire ring
 

ha ah ha ha ;D....!!!!!

Re: 38mm wastegate fire ring
 

Time will tell, as hindsight is 20/20. ;)

Re: 38mm wastegate fire ring
 

clever, very clever. I'll leave it all up to time.

So i think i'll start pulling out my engine today. and dropping in the built D. i'll post pics if i do. The deciding factor is if my bro comes back from work with a fitting for my oil drain.

Re: 38mm wastegate fire ring
 

that would be cool... :6