ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
Time to clean the garage and get rid of some of this ---- I have laying around. All of these items will be offered locally first, if nobody jumps on them... They are all going on ebay :p
https://www.homemadeturbo.com/turbo_...nifold_1_P.jpg https://www.homemadeturbo.com/turbo_...nifold_2_P.jpg https://www.homemadeturbo.com/turbo_...nifold_3_P.jpg -Custom B-series Turbo Manifold will Fit B16/B18/B20 w/ Tial35/Delta wastegate flange $200 SOLD!!!!! -Deltagate MarkII Wastegate spring set at 5.5 psi, and can be cranked up to 12psi. Does have some small damage on the cap. nothing major, works fine.. included is a small 1 1/2 dump tube.$100 https://www.homemadeturbo.com/turbo_...manifold_P.jpg -Stainless Steel Equal Length Race manifold for D-series / T4 Turbo setup. this was going to be used on my race car, that I bailed on. Comes with a lower support bracket as well. (note tial 40 flange not included) $500 https://www.homemadeturbo.com/turbo_...C_intake_P.jpg -Custom ZC Race Intake manifold, basically its a Stock ZC intake manifold chopped off at the flange, and custom runners and plenum welded on. Included is a Bored out GM Ls6 78mm Throttle Body. TPS included. Specs were used from the STR/Venom Manifold for this build. $350 https://www.homemadeturbo.com/jeffebay/ickit.jpg -Custom Air-Water Intercooler Kit, Saab IC with a Professionaly Aluminum box welded around the IC. Pressure tested (no leaks) 2 aluminum fittings also installed. 11in Wide x 10in Tall x 4.5in Deep. Included in the kit is a brand new Shurflow Water pump 3.3gpm & a 1gallon Jazz fuel cell with -10 an fittings. $300 https://www.homemadeturbo.com/jeffebay/d15b2.jpg -Honda Crx DX D15b2 shortblock w/ 100k miles on it, came out of a running car, as-is.. (alternator included!) $30 SOLD https://www.homemadeturbo.com/jeffebay/d15b6.jpg -Honda Crx HF D15b6 longblock (blown engine) DT is that a Piston has a hole in it. Rebuildable core, Included Intake manifold/Tranny/Starter/Alternator etc.. (everything shown in pic) $40 https://www.homemadeturbo.com/jeffebay/slicks.jpg https://www.homemadeturbo.com/jeffebay/slicks2.jpg -M&H 22x8.0 Slicks w/ Gunmetal Lenso tomcat drag wheels. Plenty of rubber left! (honda/vw 4x100) $250 https://www.homemadeturbo.com/turbo/b20/b20mock.jpg https://www.homemadeturbo.com/turbo/b20/b20mock3.jpg https://www.homemadeturbo.com/turbo/b20/downpipe.jpg manifold/wastegate/engine not included -Turbo/Downpipe T3/04e Turbo .52 Trim .50comp/.63ex w/ 2.5 Downpipe (smashed) Turbo has been through tons of abuse, and is in need of a rebuild. it still works, it does leak a little bit of oil from the exhaust seal. But boosts just fine. This turbo is great for any b or d series project. $350 You can PM me, or Email me.. either way works Jeff@homemadeturbo.com Jeff |
Re:ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
the d15 is a hf right if so is the tranny good, also clutch? 5spd right. if so let me know asap.
|
Re:ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
yes its a HF, 5speed tranny, and I would assume everything works, but I'm definatly not shipping that one out, local pickup only!
Jeff |
Re:ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
Air-water intercooler setup is sold..
|
Re:ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
i am interested in the turbo and the tires. i emailed you and have not got a reply. let me know
steve |
Re:ZC Race Parts, Air-water IC, Slicks, T3/T4 other shiet
Only thing left is the Race ZC intake & Race ZC turbo manifold.
|
All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands