z6 Head,Club Imobillizers,Oil lines,Radius Arms,ZC Intmd Shaft, tranny added
#1
z6 Head,Club Imobillizers,Oil lines,Radius Arms,ZC Intmd Shaft, tranny added
All proce are +shipping, Shipped from Canada via UPS Ground on most Products.
I got a z6 head off my buddies spun bearing z6. Everything looks good, Head saw VERY Reqular oil changes. Just the guy who had the car before changed the bottom end and I think he used a hammer and ratchet as a torque wrench.
Has all sensors, but is missing Dizzy(already sold) and fuel pressure regulator.
125.00 +shipping.
110.00 +shiiping without intake
Just need a little cleaning, which I will do before it goes out
Brand new Vtec Oil Pressure Sensor was crack during removal, but is still usable with some finessing
CLUB Immobilizers, 3 Available 1 Availbale
Used to lock out ignition, starter, or fuel pump. Bought them for me and a few friends but no one ended up using them.
7.00 +shipping
Oil/Coolant Lines
Pulled from various car at the junk yard. Banjo on one end, I use a 1/4"Pipe thread on the others.
5.00 each or 15.00 for all 4 +shipping
This is how they look on my 1b
Coolant
Oil Sending
Radius Arms, 1pair
Stock arm pulled from a EF Honda, Was gonna use them on my traction bars, but decided to fabricate my own
15.00 +shipping
JDM DOHC ZC Intermediate Shaft
This is from a J-spec motor, not a 88-89 USDM Integra, I went to a LSD with non-equal length Drive shafts so I don't need it anymore.
40.00 +shipping
I also have the tranny from the z6 engine. No grinds, same milage. Flywheel can also be available.
75.00+shipping
I got a z6 head off my buddies spun bearing z6. Everything looks good, Head saw VERY Reqular oil changes. Just the guy who had the car before changed the bottom end and I think he used a hammer and ratchet as a torque wrench.
Has all sensors, but is missing Dizzy(already sold) and fuel pressure regulator.
125.00 +shipping.
110.00 +shiiping without intake
Just need a little cleaning, which I will do before it goes out
Brand new Vtec Oil Pressure Sensor was crack during removal, but is still usable with some finessing
CLUB Immobilizers, 3 Available 1 Availbale
Used to lock out ignition, starter, or fuel pump. Bought them for me and a few friends but no one ended up using them.
7.00 +shipping
Oil/Coolant Lines
Pulled from various car at the junk yard. Banjo on one end, I use a 1/4"Pipe thread on the others.
5.00 each or 15.00 for all 4 +shipping
This is how they look on my 1b
Coolant
Oil Sending
Radius Arms, 1pair
Stock arm pulled from a EF Honda, Was gonna use them on my traction bars, but decided to fabricate my own
15.00 +shipping
JDM DOHC ZC Intermediate Shaft
This is from a J-spec motor, not a 88-89 USDM Integra, I went to a LSD with non-equal length Drive shafts so I don't need it anymore.
40.00 +shipping
I also have the tranny from the z6 engine. No grinds, same milage. Flywheel can also be available.
75.00+shipping
#2
#4