t3 turbo, BOV, FMIC, SMIC, gauges
06-14-2005, 09:40 PM
#1
0.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 192
t3 turbo, BOV, FMIC, SMIC, gauges
Bosch BOV"S (3)~all have good spring tension, and sound a nice woosh when you let off of it, vac line input in the top, wires comming from one unknown of purpose~ 15 bucks each
Garrett t3 turbo~ mint condition, so little play isnt even worth saying it has play, came off a car with 78k and change, both water and oil cooled, A/R is i believe .42/ .48~ would like to see 175 shipped
Saab SMIC (2)~ both are in great condition, not a lot of bent fins, pressure tested to 20 psi and holds good, no apparent leaks, both have pipe that says "turbo intercooler" on it (WILL SELL SEPERATELY)~ like to see 35 + shipping each
DIMENSIONS ARE:
OVERALL LENGTH- ~12"
OVERALL WIDTH- ~9"
THICKNESS- ~2.5"
INLET PIPE DIAMETER- ~2.25"
Audi SMIC~ in good condition, just could use a little touch up paint and she would be mint, pressure tested to 20 psi and holds good, no apparent leaks, like to see 50 + shipping
DIMENSIONS ARE:
OVERALL LENGTH- ~19"
OVERALL WIDTH- ~7.5"
THICKNESS- ~3.5 "
INLET PIPE DIAMETER- ~2.25"
Volvo FMIC~ pressure tested to 20 psi and has no apparent leaks, fins are in good condition! Like to see 65 + shipping
DIMENSIONS ARE:
OVERALL LENGTH- ~18"
OVERALL WIDTH- ~24"
THICKNESS- ~1.5"
INLET PIPE DIAMETER- ~2.5"
Saab FMIC~ pressure tested to 20 psi and has no apparent leaks, great condition, just some touch up paint and she would be mint! Like to see 65 + shipping
DIMESIONS ARE:
OVERALL LENGTH- ~26"
OVERALL WIDTH- ~15"
THICKNESS- ~1.25"
INLET PIPE DIAMETER- ~2.25"
OEM gauge cluster~ as you can see a 3 pod design, comes with volts, oil pressure (needs sender), and also a gyrometer (i think thats what it is), the holes for the gauges are about 2.5 inches, so you could easily just remove what is in there now and put whatever gauges you need to run in there and it would run mint. Would fit great on the dash of pretty much any car... Like to see 20 + shipping for it
WILL TAKE PAYMENT PRETTY MUCH HOWEVER IT IS OFFERED, BUT I DO PERFER PAYPAL...have sold to people on here, on other sites, and on ebay with 100% positive feedback, vouches on here are DMX20, HOLLAS628, JECU, KYLE, BUNZ559, JUSTINZC, AND SOME OTHERS....
if you have an offer for something i am selling, just shoot me a pm or post it, no reasonable offer rejected, thanks for looking!
Garrett t3 turbo~ mint condition, so little play isnt even worth saying it has play, came off a car with 78k and change, both water and oil cooled, A/R is i believe .42/ .48~ would like to see 175 shipped
Saab SMIC (2)~ both are in great condition, not a lot of bent fins, pressure tested to 20 psi and holds good, no apparent leaks, both have pipe that says "turbo intercooler" on it (WILL SELL SEPERATELY)~ like to see 35 + shipping each
DIMENSIONS ARE:
OVERALL LENGTH- ~12"
OVERALL WIDTH- ~9"
THICKNESS- ~2.5"
INLET PIPE DIAMETER- ~2.25"
Audi SMIC~ in good condition, just could use a little touch up paint and she would be mint, pressure tested to 20 psi and holds good, no apparent leaks, like to see 50 + shipping
DIMENSIONS ARE:
OVERALL LENGTH- ~19"
OVERALL WIDTH- ~7.5"
THICKNESS- ~3.5 "
INLET PIPE DIAMETER- ~2.25"
Volvo FMIC~ pressure tested to 20 psi and has no apparent leaks, fins are in good condition! Like to see 65 + shipping
DIMENSIONS ARE:
OVERALL LENGTH- ~18"
OVERALL WIDTH- ~24"
THICKNESS- ~1.5"
INLET PIPE DIAMETER- ~2.5"
Saab FMIC~ pressure tested to 20 psi and has no apparent leaks, great condition, just some touch up paint and she would be mint! Like to see 65 + shipping
DIMESIONS ARE:
OVERALL LENGTH- ~26"
OVERALL WIDTH- ~15"
THICKNESS- ~1.25"
INLET PIPE DIAMETER- ~2.25"
OEM gauge cluster~ as you can see a 3 pod design, comes with volts, oil pressure (needs sender), and also a gyrometer (i think thats what it is), the holes for the gauges are about 2.5 inches, so you could easily just remove what is in there now and put whatever gauges you need to run in there and it would run mint. Would fit great on the dash of pretty much any car... Like to see 20 + shipping for it
WILL TAKE PAYMENT PRETTY MUCH HOWEVER IT IS OFFERED, BUT I DO PERFER PAYPAL...have sold to people on here, on other sites, and on ebay with 100% positive feedback, vouches on here are DMX20, HOLLAS628, JECU, KYLE, BUNZ559, JUSTINZC, AND SOME OTHERS....
if you have an offer for something i am selling, just shoot me a pm or post it, no reasonable offer rejected, thanks for looking!
06-15-2005, 01:02 AM
#2
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: t3 turbo, BOV, FMIC, SMIC, gauges
I've never seen anyone sell a gauge pod out of an airplane before. lol. Good ----.
I'm looking at it, and if the holes are the right size you could take out the gauges and put autometers in there, and mount it upside down under the radio consol for that super stock look. Someone should do it just to help my idea come to life.
I'm looking at it, and if the holes are the right size you could take out the gauges and put autometers in there, and mount it upside down under the radio consol for that super stock look. Someone should do it just to help my idea come to life.
06-15-2005, 03:56 PM
#4
0.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 192
Re: t3 turbo, BOV, FMIC, SMIC, gauges
Originally Posted by Stealthmode
I've never seen anyone sell a gauge pod out of an airplane before. lol. Good ----.
I'm looking at it, and if the holes are the right size you could take out the gauges and put autometers in there, and mount it upside down under the radio consol for that super stock look. Someone should do it just to help my idea come to life.
I'm looking at it, and if the holes are the right size you could take out the gauges and put autometers in there, and mount it upside down under the radio consol for that super stock look. Someone should do it just to help my idea come to life.
06-27-2005, 09:34 PM
#8
0.0 BAR
Join Date: Feb 2003
Posts: 0
Re: t3 turbo, BOV, FMIC, SMIC, gauges
I need a saab smic, whatever bends I can use (rubber or metal, it doesn't matter) and possibly 2 of the plastic bov's. I'm doing a super budget setup as cheaply as possible. Make me a deal on what you've got within those guidelines. 
06-28-2005, 07:05 PM
#9
0.5 BAR
Thread Starter
Join Date: Sep 2004
Posts: 192
Re: t3 turbo, BOV, FMIC, SMIC, gauges
ok, so for one of the smic's, a 90 bend (like in the pic) and 2 bov's ill do 60 plus shipping? Sound good? Also, if you want the t3 also, no one has spoken for it, just let me know and we can work somehting out if you are interested...
