SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
06-08-2005, 03:43 PM
#1
1.5 BAR
Thread Starter
Join Date: Oct 2004
Posts: 1,183
SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
these are a set of srp pistons for a .10+ bore. compression is 10.5:1 in a d16z6 and 8.5-9:1 in a zc. dish tops. they have 400 miles on them. they were removed because the adjustable cam gear wasn't properly tightened and one valve barely kissed the valve relief of th piston. it was then taken to the machine shop and fixed. its 100% usable. there was no real damage. no skirt scuffage, damage what so ever! retail $4XX. get them for $220 to your door. pics speak for themself. SRP part # 149203
? I have B18A1 full bottom im trying to get rid of
06-08-2005, 08:55 PM
#5
1.5 BAR
Thread Starter
Join Date: Oct 2004
Posts: 1,183
Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
no trades, i need to sell these to finish sleeving my block. the compression on a zc would be close to 10.5:1 it could be higher or lower depending on what machine work you do, as far as decking the block, resurfacing or milling the head, what type of headgasket you use(thickness) , all these things play a key role. steal this bitches b4 they are gone
06-08-2005, 08:58 PM
#6
3.0 BAR
Join Date: Apr 2004
Posts: 9,800
Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
Originally Posted by 91efate
no trades, i need to sell these to finish sleeving my block. the compression on a zc would be close to 10.5:1 it could be higher or lower depending on what machine work you do, as far as decking the block, resurfacing or milling the head, what type of headgasket you use(thickness) , all these things play a key role. steal this bitches b4 they are gone
ZC's have domed pistons stock, i would think these ones would result in lower compression.
do you happen to have the part # off of them?
06-08-2005, 09:26 PM
#8
1.5 BAR
Thread Starter
Join Date: Oct 2004
Posts: 1,183
Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
the guy whom i got them from says they are 10.5:1 in a d series which d series? he did not say but i put them next to another set of srp pistons that ARE 9:1 and the tops aren't the same these have higher tops that don't recess as deep as the 9:1's. so im not sure now but you do have a point there. there is nothing wrong with them
06-08-2005, 09:26 PM
#9
3.0 BAR
Join Date: Apr 2004
Posts: 9,800
Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
Originally Posted by Stealthmode
****, I may be perfectly in line when I say you are teh wrong.
Those are 9:1 d series pistons if I ever saw em. (and I have.)
Those are 9:1 d series pistons if I ever saw em. (and I have.)
i said they didnt look like 10.5:1 pistons.
06-08-2005, 09:32 PM
#10
1.5 BAR
Thread Starter
Join Date: Oct 2004
Posts: 1,183
Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
actually i just checked and the info was correct these ARE 10.5:1 in a d16z6. the tops are dish type because if you look at where it says piston cc's you'll see it says -3.8cc with means they are dish tops.
http://www.jepistons.com/pdf/2005-sportcomp5.pdf
SRP part # 149203
http://www.jepistons.com/pdf/2005-sportcomp5.pdf
SRP part # 149203
