SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

these are a set of srp pistons for a .10+ bore. compression is 10.5:1 in a d16z6 and 8.5-9:1 in a zc. dish tops. they have 400 miles on them. they were removed because the adjustable cam gear wasn't properly tightened and one valve barely kissed the valve relief of th piston. it was then taken to the machine shop and fixed. its 100% usable. there was no real damage. no skirt scuffage, damage what so ever! retail $4XX. get them for $220 to your door. pics speak for themself. SRP part # 149203

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

Would you be willing to trade the pistons for anything???? I have B18A1 full bottom im trying to get rid of

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

too bad they're high comp or id be all over them.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

What comp would these put out on a zc?

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

no trades, i need to sell these to finish sleeving my block. the compression on a zc would be close to 10.5:1 it could be higher or lower depending on what machine work you do, as far as decking the block, resurfacing or milling the head, what type of headgasket you use(thickness) , all these things play a key role. steal this bitches b4 they are gone

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

that's odd, are you sure?

ZC's have domed pistons stock, i would think these ones would result in lower compression.

do you happen to have the part # off of them?

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

Fook, I may be perfectly in line when I say you are teh wrong.


Those are 9:1 d series pistons if I ever saw em. (and I have.) O0

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

the guy whom i got them from says they are 10.5:1 in a d series which d series? he did not say but i put them next to another set of srp pistons that ARE 9:1 and the tops aren't the same these have higher tops that don't recess as deep as the 9:1's. so im not sure now but you do have a point there. there is nothing wrong with them

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

wrong about what then?

i said they didnt look like 10.5:1 pistons.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

actually i just checked and the info was correct these ARE 10.5:1 in a d16z6. the tops are dish type because if you look at where it says piston cc's you'll see it says -3.8cc with means they are dish tops.

http://www.jepistons.com/pdf/2005-sportcomp5.pdf

SRP part # 149203

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,zc
 

z6 pistons in a ZC would drop comp.

so how was i wrong steve?

ps - you might wanna take the zc outta your topic title.

alec: comp in your motor would be pretty low probably, like 8.5:1 range id wager
, the comp calc says 8:1 flat but it think its shorting it a bit.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

i don't think it'd be that low. maybe like 8.5-9:1

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

yeah i got the wager on 8.5 range, i think that one comp calculator is off, another one i messed with said 8.6:1.

id rock it for $200

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

8.5:1 is a little lower then I wanted but not too much. I'll just run more boost to make up for it lol.

Do you take paypal?

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

no sorry i dont....already been fucked in the butt by ppal once....never twice. i accept m.o. or personal check. $220 and they are yours.....you know you need them fookmiester O0

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

im not buying them. look at the screenname.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

lol ha oops, i mean civiczc. lmk

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

Where are you located? Maybe we can do the exchange in person.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

those would be perfecti in a a6... :o

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

im in CT and willing to meet you. where are you?

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

okay, but what the ---- is your point?

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

My point is, that those look to be the same 9:1's that I had. Just my observation.


Oh fookle, call me tomarrow about that manifold.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

eh, the hurry isn't so bad anymore...the install day's been postponed.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

good, tunertoys says he's out of flanges? or something like that. I need to call him and find out whats going on.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

I'm in WA so that's not gonna happen. Pm me your address and I'll send you a check or MO I guess.

Btw those 9:1 srp's look they have a deeper dish then these, and they are tore the ---- up. How did that happen? I hope that's not from the quality.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

Those are tore up compliments of 17.5 psi, 3 degrees retard on the dizzy, and the afc hack.


You should try it one day. :D (ok, you shouldn't) ;)

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

SOLD TO CIVICZC ;D

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

nice find alec, those might be a little lower than desired compression ratio, but i guess that just means you'll have to push more boost ;D

wish i could find a deal like that. im gonna end up shelling out for the roller waves.

Re: SRP Pistons +.10 over 10.5:1 NEW! d-series ,d16z6,zc
 

don't worry its going to a good cause ;D 22psi 340 hp dohc zc >:D