SRP, CROWER d-series internals, etc.
 

heres what i have:

d16 y-series arp head studs, used for about 5k miles, make an offer

crower billet rods for d16s, were 660 new, used them for 5000 miles, ill sell for 500 or B/O

je/srp d16 stock bore 9:1 pistons, also used for about 5k miles, paid 390, selling for 250 or B/O (comes with used je rings too :-\)

i also have the bottom end (d16y7) these were in, had zero miles when the internals were put in, and is posted with endyn block posts. make an offer, could use a good hone

i also have another y7 that is posted and notched for eagle rods but should get bored, make an offer

i also have a d16y7 crank (not sure what else it fits) that was cut by a local machine shop ( i cant even remember the size right now but i have it written down in the shop) it was run for a bout 30 minutes and is in good shape, make an offer

also: d16y7 oil pan (tapped kinda ghetto with brass fitting but works great), d16y7 oil pumps, water pumps, throttle body, and one really high mileage d16y7 head that needs valve guide seals if anyone needs it, make a low offer

Re:d-series internals, etc
 

ive mailed you :D :-*

Re:d-series internals, etc
 

Let me guess, you're on the West Coast?

Re:d-series internals, etc
 

also have a d16y7 crank (not sure what else it fits) that was cut by a local machine shop ( i cant even remember the size right now but i have it written down in the shop) it was run for a bout 30 minutes and is in great shape, make an offer


the crank will fit any d16 motor.i have already done it y7,y8 a6,z6..same crank

Re:d-series internals, etc
 

alright yea i assumed it but wasnt sure if all had exactly the same journal sizes....

and im on the east coast, jersey to be exact

Re:d-series internals, etc
 

bump ;)

Re:d-series internals, etc
 

i knew i saw this post before. got any pics of the pistons. id be really interested. and do you know where i can get a new set or rings for em. i already bought a set of eagle rods so hope you can hook me up with the pistons. what are the condition of them, how much boost where you running. etc etc.

Re:d-series internals, etc
 

o and ill give you 225 shipped for em if you can get me those pics. i can pay once i take a look at the pics and see if i like em. and plus ill need to new rings too

Re:d-series internals, etc
 

bump...ill take 225 for the pistons and 450 for the rods...make some offers guys

Re:d-series internals, etc
 

head studs are sold ;)