SRP, CROWER d-series internals, etc.
heres what i have:
d16 y-series arp head studs, used for about 5k miles, make an offer crower billet rods for d16s, were 660 new, used them for 5000 miles, ill sell for 500 or B/O je/srp d16 stock bore 9:1 pistons, also used for about 5k miles, paid 390, selling for 250 or B/O (comes with used je rings too :-\) i also have the bottom end (d16y7) these were in, had zero miles when the internals were put in, and is posted with endyn block posts. make an offer, could use a good hone i also have another y7 that is posted and notched for eagle rods but should get bored, make an offer i also have a d16y7 crank (not sure what else it fits) that was cut by a local machine shop ( i cant even remember the size right now but i have it written down in the shop) it was run for a bout 30 minutes and is in good shape, make an offer also: d16y7 oil pan (tapped kinda ghetto with brass fitting but works great), d16y7 oil pumps, water pumps, throttle body, and one really high mileage d16y7 head that needs valve guide seals if anyone needs it, make a low offer |
Re:d-series internals, etc
ive mailed you :D :-*
|
Re:d-series internals, etc
Let me guess, you're on the West Coast?
|
Re:d-series internals, etc
also have a d16y7 crank (not sure what else it fits) that was cut by a local machine shop ( i cant even remember the size right now but i have it written down in the shop) it was run for a bout 30 minutes and is in great shape, make an offer
the crank will fit any d16 motor.i have already done it y7,y8 a6,z6..same crank |
Re:d-series internals, etc
alright yea i assumed it but wasnt sure if all had exactly the same journal sizes....
and im on the east coast, jersey to be exact |
Re:d-series internals, etc
bump ;)
|
Re:d-series internals, etc
i knew i saw this post before. got any pics of the pistons. id be really interested. and do you know where i can get a new set or rings for em. i already bought a set of eagle rods so hope you can hook me up with the pistons. what are the condition of them, how much boost where you running. etc etc.
|
Re:d-series internals, etc
o and ill give you 225 shipped for em if you can get me those pics. i can pay once i take a look at the pics and see if i like em. and plus ill need to new rings too
|
Re:d-series internals, etc
bump...ill take 225 for the pistons and 450 for the rods...make some offers guys
|
Re:d-series internals, etc
head studs are sold ;)
|
Re:d-series internals, etc
what kind of dsm you got?
|
Re:d-series internals, etc
je/srp d16 stock bore 9:1 pistons, also used for about 5k miles, paid 390, selling for 250 or B/O (comes with used je rings too )
I'm intrested in this, these will fit into a zc correct? and what would the compression be with these in a zc? and, like above, how much boost did you run on these + these are forged right? nathan |
Re:d-series internals, etc
i have an awd laser, and yes these are forged, i ran 16-17 psi on them for maybe two weeks (car sat more then it got driven and i never really beat on it, and the boost was at 12 psi most of the time)sorry i dont know what the compression would be in a zc but someone else might be able to hook you up with a link to a compression calculator
|
Re:d-series internals, etc
7.9c/r if they go in a ZC...
|
Re:d-series internals, etc
rods/pistons are pending ;)
|
Re:d-series internals, etc
buyer flaked on the rods and pistons...650 for the set in great condition ;D
|
Re:SRP, CROWER d-series internals, etc.
bump
|
Re:SRP, CROWER d-series internals, etc.
If your pistons are still around in a while I might be interested. I've got to come up with some money first.
Would you take 225 shipped to 97006? |
Re:SRP, CROWER d-series internals, etc.
yea that sounds good if i still have them ;)
|
Re:SRP, CROWER d-series internals, etc.
pics of pistons?
|
Re:SRP, CROWER d-series internals, etc.
Sorry guys, Im taking
EVERYTHING Soon as he gets back to me, Im deifnetely taking everything Sorry Hope to hear from ya soon man, def want it all, to bad you already sold those head studs |
Re:SRP, CROWER d-series internals, etc.
pm sent ;)
|
Re:SRP, CROWER d-series internals, etc.
where are you located
|
Re:SRP, CROWER d-series internals, etc.
central jersey
|
Re:SRP, CROWER d-series internals, etc.
bump for a koo kid and a good welder, thanks again bro
|
Re:SRP, CROWER d-series internals, etc.
pistons sold yet..
|
Re:SRP, CROWER d-series internals, etc.
thought i had a buyer but as of right now everything is up for grabs
|
Re:SRP, CROWER d-series internals, etc.
pmed you about the rods
|
Re:SRP, CROWER d-series internals, etc.
doc boost is taking the rods and pistons ;)
|
Re:SRP, CROWER d-series internals, etc.
:'(
|
All times are GMT -5. The time now is 01:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands