Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
:)
|
B series mount kit for 88-91 Civic/Crx
B series mount kit for 88-91 Civic/Crx
http://index.sparkracing.com/motor_mount_kits.jpg Spark Racing offers a line of motor mount kit that anyone can afford. Not only do they come with a lifetime warranty. They are all crafted using only the best in materials. All mounts bolt directly in with minor modifications and feature a solid mount design for better launches and 60-foot times. All mounts are made from a special rubber and polyurethane blend to provide stiffness and reduce vibration. Application: B series mount kit for 88-91 Civic/Crx Retail Price: $249.95 Special Price $179.95 shipped Any more question about this pre-sale. Please contact me !! |
Spark Racing Custom Race Blocks ! Made to Order
Custom Race Blocks
We at Spark Racing strive to supply you with the best in street and track racing blocks. Not only are all blocks made to order, they are all built as if they were one of our race vehicles engines. All Sleeves done by RS Machines B18A/B Blocks *Note Knife edge crank add $300 Naturally Aspirated http://index.signmenow.com/engine_drive_train.jpg Stage 1 Street Version N/A Price: $1295.95 price includes core B18A/B Block 1.8 liters ITR Pistons and rings oversized Rods Stock Micro polished crank Bore and Honed New main and rod bearings New oil Pump New water pump Assembly Stage 2 Street Version N/A Price: $1495.95 price includes core B18A/B Block 1.8 liters 81 mm 11.5:1 Arias Pistons Rods Stock Micro polished crank Bore and Honed New main and rod bearings New oil Pump New water pump Assembly Stage 3 Street Version N/A Price: $2495.95 price includes core B18A/B Block 2.0 liters 85 mm 11.5:1 Arias Pistons Rods Stock Micro polished crank Darton Sleeves Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 4 Street Version N/A Price: $2795.95 price includes core B18A/B Block 2.0 liters 85 mm 11.5:1 Arias Pistons Eagle Rods Micro polished crank Darton Sleeves Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 5 Drag Version N/A Price: $2995.95 price includes core B18A/B Block 2.0 liters 85 mm MAX DOME Arias Pistons Eagle Rods Micro polished crank Darton Sleeves Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 6 Drag Version N/A Price: $3995.95 price includes core B18A/B Block 2.2 liters 86 mm MAX DOME Arias Pistons Custom Rods 95mm Stroked Micro polished crank Darton Sleeves Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 7 Drag Version N/A Price: $4995.95 price includes core B18A Block 2.3 liters ½ Deck Extension 86 mm MAX DOME Arias Pistons w/ gas ports Custom Rods 100mm Stroked Micro polished crank Darton Sleeves Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Forced Induction http://index.signmenow.com/turbo_engine_accessories.jpg Stage 1 Street Version Turbo Price: $1495.95 price includes core B18A/B Block 1.8 liters 81mm 9:1 Arias Pistons Rods Stock Micro polished crank Bore and Honed New main and rod bearings New oil Pump New water pump Assembly Stage 2 Street Version Turbo Price: $1949.95 price includes core B18A/B Block 1.8 liters 81mm 9:1 Arias Pistons Eagle Rods Micro polished crank Bore and Honed New main and rod bearings New oil Pump New water pump Assembly Stage 3 Street Version Turbo Price: $2795.95 price includes core B18A/B Block 1.9 liters 83mm 9:1 Arias Pistons Eagle Rods Darton Sleeves Micro polished crank Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 4 Street Version Turbo Price: $3095.95 price includes core B18A/B Block 1.9 liters 83mm 9:1 Arias Pistons Crower Rods Darton Sleeves Micro polished crank Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 5 Drag Version Turbo Price: $3095.95 price includes core B18A/B Block 1.9 liters 83mm 10:1 Arias Pistons Crower Rods Darton Sleeves Micro polished crank Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Stage 6 Drag Version Turbo Price: $3895.95 price includes core B18A/B Block 2.0 liters 83mm 10:1 Arias Pistons Crower Rods Darton Sleeves 95 mm Stroked Crank Bore and Honed Step Deck New main and rod bearings New oil Pump New water pump Assembly Note*All Prices include block core, factory oil pump, new bearings, trust washers, new factory water pump, new factory seals, hot tanking of all blocks, resurfacing, blue printing, boring, balancing, decking the block, and assembly. Note*All blocks are crated and do not come with, alternator, a/c, exhaust manifold, factory mounts, oil pan and rear bracket. Note*All blocks are for off road use only and are not intended for Highways use, all race blocks have no warranty do to the fact that they are intended for race purposes. |
Spark Racing Turbo Kits $2850.00 shipped
|
Port and Polished Cylinder Heads For Street to Strip Setups
Custom Cylinder Heads
We at Spark Racing strive to supply you with the best in street and track racing Cylinder Heads. Not only, our All Cylinder Heads ported and assembled to order, they are all treated as if they were one of our own. All Cylinder Heads are Ported by RS Machines and PHR machines. http://index.sparkracing.com/company.jpg B16A: Street: Price: $1400.00 price includes core Street application ported and polished Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Full Race: Price: $1600.00 price includes core Full Race application ported and polished Oversized Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Custom Combustion Chamber B18C: Street: Price: $1550.00 price includes core Street application ported and polished Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Full Race: Price: $1750.00 price includes core Full Race application ported and polished Oversized Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Custom Combustion Chamber H22A: Street: Price: $1550.00 price includes core Street application ported and polished Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Full Race: Price: $1750.00 price includes core Full Race application ported and polished Oversized Stainless Steel Valves Three angle valve job Full Race Springs Titanium Retainers Chromoly Valve seats Custom Combustion Chamber Note*All Prices include cylinder head core, new factory seals, hot tanking of all cylinder head core, resurfacing and assembly. Note*All cylinder head are crated cylinder head and do not come with, intake manifold, injectors, distributor, throttle body, exhaust manifold, and v-tec solenoids Note*All cylinder head are for off road use only and are not intended for Highways use, all cylinder head have no warranty do to the fact that they are intended for race purposes. |
Re:Port and Polished Cylinder Heads For Street to Strip Setups
We need some D series pricing. Your going to find that most of the people on this board are running D series engines. Just a heads up.
|
Re:Port and Polished Cylinder Heads For Street to Strip Setups
Originally Posted by Xplocivic
We need some D series pricing. Your going to find that most of the people on this board are running D series engines. Just a heads up.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
and we're all tight wads with money. ;D Welcome to the site and good luck with business. :)
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Although pretty good prices on those B blocks, jeesh I dont think I could build those as cheap... :P
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
good prices...especially for the mounts.
Are the clutch kits also for D-series? |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
How much for a spark wastegate?I counldn't get a price off your website.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Wow, you have alot of nice parts!!! I couldn't get a price for a B series turbo manifold off your site either. Good luck selling, I'm sure you'll have no problems selling around here just from what I'm seeing.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
This guy is legit and has good ----. Exospeed start playahating on him in Honda-tech.com cause they couldn't match his prices.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Anthony...Whats the deal w/ the Exedy Clutches...can you sell them for the price you were selling them before everyone came down on you? i need the Cerametallic Clutch kit for a 94 integra LS w/ 10.5psi of boost..(about 250whp or so)....
just incase some of you arent honda-tech members or didnt see what happened...Anthony(spark racing) was selling these clutches for ridiculous prices...and a few of the vendors called exedy and told anthony to raise his prices...atleast it was something to that extent... |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
i need a cltuch that can hold 400ft lbs of tq + for a 1988 accord. can you do it ? b series flywheel has a ring gears thats just a tiny bit bigger and the flywheel does bolt up. can you help ?
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
I need the cheapest clutch that can hold at least 240- 250 hp and 200 lb.ft for a D-series.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
You do not even know how happy this post has made me with this B18a(b) build up. That is exactly what I want and your specs are pretty close to what I had in mind. I was just wondering how much it would be to ship this block to NC. I was planning on either the stage 3 or 4 turbo block if that makes any difference. These prices are great and if the shipping doesn't cost me an arm and a leg you will definately being hearing from me. Just wondering how long you will be keeping these prices the way they are or is this your common rate. It may take me a month or two to sell my current car to buy this block but I will definately get back to you. Thanks a ton for making this post. Dag I may have to hook myself up with a clutch too.
~ANDREW~ |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Originally Posted by tranceminister
Wow, you have alot of nice parts!!! I couldn't get a price for a B series turbo manifold off your site either. Good luck selling, I'm sure you'll have no problems selling around here just from what I'm seeing.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Originally Posted by EGSix
This guy is legit and has good ----. Exospeed start playahating on him in Honda-tech.com cause they couldn't match his prices.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Originally Posted by bigwig
Anthony...Whats the deal w/ the Exedy Clutches...can you sell them for the price you were selling them before everyone came down on you? i need the Cerametallic Clutch kit for a 94 integra LS w/ 10.5psi of boost..(about 250whp or so)....
just incase some of you arent honda-tech members or didnt see what happened...Anthony(spark racing) was selling these clutches for ridiculous prices...and a few of the vendors called exedy and told anthony to raise his prices...atleast it was something to that extent... |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Originally Posted by sean88accord
i need a cltuch that can hold 400ft lbs of tq + for a 1988 accord. can you do it ? b series flywheel has a ring gears thats just a tiny bit bigger and the flywheel does bolt up. can you help ?
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
real men dont worry about cltuch chatter. how much and when can you get it done. Email me at Djfreggens@aol.com
I am heavily in need of cltuch!!!!!!!!! no 4 pucks either i rip those to peices. |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
I bought a cerametallic from Spark a few weeks ago. Getting it installed tuesday. Hes a great seller and you get your ---- QUICK!
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
nice
Is it the one for a d-series? What kind of flywheel you need for that one?? the 90+ d-series flywheel? |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
no i have a 1988 honda accord with a a20a engine. the b flywheelbolts to my crank but the ring gear is to large. act makes a 6 puck extreme duty clutch but its worthless becuase i already have it and it wont hold worth ----.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
sorry sean88accord.
I was asking BlinD |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Sorry for the late massages I have been away on buisness |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
I've contacted Matt from www.speedupgrade.com. I'm really impressed with your products. I hope to get your B18C turbo kit. Best of luck to your business ;)
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
question: what is "Jobber"??
anyway im looking to get a clutch for a 90-91 Integra tranny. 300hp/275tq (at the wheels). can you PM me with price and availblitly... |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Quick question. Do u offer warranties for the turbo manifold?
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
how much just to get a block (b20) sleeved if i sent the bare block to you?
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
how much just to get a block (d16a6) sleeved if i sent the bare block to you?
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
You have PM :)
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Were your b series mount kits into a 4g civic/crx tested on a b16 or a b18?
Hasport makes a b16 and b18 mount kits due to different heights of the blocks. They make the b18 mounts to lift the motor off the ground for better ground clearence. This results in the valve cover rubbing the hood. I was just wondering which of these two situations you have made the design around?? Thanks |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
^good question
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
I've never had any of your products, so I don't have first hand experience. I just look out for my HMT members when I can.
http://honda-tech.com/zerothread?id=685923 Is there anything to this? Or am I mistaken? I won't pass judgement without your response. Thanks. |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
Originally Posted by Stealthmode
I've never had any of your products, so I don't have first hand experience. I just look out for my HMT members when I can.
http://honda-tech.com/zerothread?id=685923 Is there anything to this? Or am I mistaken? I won't pass judgement without your response. Thanks. |
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
i need a clutch kit for a b series cable...
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
a jobber is a price list with suggested retail prices. there are 2 prices on it, the one they pay,which is a wholesale price, and then the suggested markup to the consumer.
|
Re:Sparks Racing Turbo/Clutch/Mount Kits & Race Engines/Heads
I want some of your mounts asap man.Hit me up
|
All times are GMT -5. The time now is 12:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands