Some Moates.net gear at good prices (prices are OBO)
12-09-2006, 11:25 AM
#1
1.0 BAR
Thread Starter
Join Date: Apr 2005
Posts: 212
Some Moates.net gear at good prices (prices are OBO)
Alright ive got some moates.net gear left over from my now Sold turbo project. Up for grabs is
2TIMER (brand new never installed)
This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256. It has a single wire lead coming off of it. Put a 27SF512 chip in it, and switch the wire lead to chassis ground to switch between two separate programs! Comes with a 27SF512 chip. Sells from moates.net for $30 plus shipping, get it here for 20 shipped
HULOG Honda USB Datalog Interface (only used once)
With this device (an abridged/modified version of the ALDU1), you can perform datalogging on your Honda ECU using USB as your PC interface. Comes with converter box, USB cable, and a cable to go from the box to your 4-pin header on the ECU. Check the documentation section for an installation guide. mine is missing the cable that goes from teh ecu to the HULOG (forgot it in the car i sold, im sure its easily obtainable from moates) get it from Moates.net for 35 plus shipping get it here for 20 shipped
BURN1 Flash-n-Burn USB-Based Chip Programmer (used but working perfectly)
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc).
get it from moates for 85 plus shipping, get it here for 60 shipped
Just PM me with your interest or just e-mail me at f4osty46@hotmail.com.
2TIMER (brand new never installed)
This little gem plugs into your 28-pin socket that normally takes a 27C128 or 27C256. It has a single wire lead coming off of it. Put a 27SF512 chip in it, and switch the wire lead to chassis ground to switch between two separate programs! Comes with a 27SF512 chip. Sells from moates.net for $30 plus shipping, get it here for 20 shipped
HULOG Honda USB Datalog Interface (only used once)
With this device (an abridged/modified version of the ALDU1), you can perform datalogging on your Honda ECU using USB as your PC interface. Comes with converter box, USB cable, and a cable to go from the box to your 4-pin header on the ECU. Check the documentation section for an installation guide. mine is missing the cable that goes from teh ecu to the HULOG (forgot it in the car i sold, im sure its easily obtainable from moates) get it from Moates.net for 35 plus shipping get it here for 20 shipped
BURN1 Flash-n-Burn USB-Based Chip Programmer (used but working perfectly)
USB Chip Programmer works with the AT29C256, 27SF512, and AM29F040 chips. Self-powered from the USB port, so no power adapter is needed! Burner can also be used to read stock GM memcals using the HDR1 adapter. While it will only program the three types of chips listed, please note that those three chips can be used as drop-in replacements for most EFI applications. Comes with stand-alone chip programming software (available for download). Also compatible with TunerPro RT. Will read most stock-style chips (2732A, 27C128/256/512/etc).
get it from moates for 85 plus shipping, get it here for 60 shipped
Just PM me with your interest or just e-mail me at f4osty46@hotmail.com.
Thread
Thread Starter
Forum
Replies
Last Post
alltrac1993
Engine Management
37
06-16-2005 03:32 AM
