---- for sale... need money!!! firm but low prices!! all legit..
09-27-2004, 11:51 PM
#1
1.5 BAR
Thread Starter
Join Date: Oct 2003
Posts: 1,107
---- for sale... need money!!! firm but low prices!! all legit..
**UPDATE ON Z6 HEAD, forgot injectors came with it, look below!***
Okay first off i do NOT have a camera available to take pictures.. if you guys don't believe what i say i have, then find me..
-Apexi V-AFC 1, SOLD
-SS Autochrome manifold bought off ebay, new style with braces on it, all gaskets and bolts that came with it.. D16 mani.. search ~$180 shipped right? $110 Shipped! NEVER USED.
-88 CRX Si tranny, odd ball year.... little grind 1st - 2nd, not even 1/2 the time i speed shifted.. need it out of here. PICKUP - $50, for shipping talk to me.. ~70,000 miles on the tranny
-88 CRX Si 6000 mile flywheel and clutch, guarentee only 6000 miles on it and it WASN'T beat, get it out $75 SHIPPED
-D16z6 head with d16a6 intake mani with a stripped bolt on the IM, so IM won't come off unless you have a socket to take off stripped bolts or i'm sure someone can figure it out, i don't have time to work at it, ***FORGOT, ALSO COMES WITH DSM 390CC INJECTORS... 100k on head, get it outta here! $160 SHIPPED for all!!
-if the head is sold.. i'll drop the block... i have a 13LBS stock lightened flywheel not too long ago machined with a used exedy clutch (stage 1) held 13psi fine, still going for some while.. $60 shipped
-HF manifold with T3 adapter plate - SOLD
-Brospeed 88-91 civic/crx header... has a crack... been tried to re-weld a few times.. haven't found it yet... header and dp included.. its yours locally for $5 or shipped out for $25!
-BARE d16a6 head with rocker arm assebly.. no valves, springs, retainers, camshaft, cam gear... $30 shipped its yours... very well cleaned up.
-88-91 civic hatch (maybe others?) Thermal 2.25in MID-PIPE to a cust 2.25 CRUSH bent axle back with a tanabe-STYLE muffler, muffler is in damn good condition... $250.. s/h talk to me again.
-T3 .60/.63 turbo, very little shaft play... NO seals out when i ran it (1 month ago).. has stock wastegate at 4 psi.. o2 housing... very nice.. might keep it for my B18 turbo but i need the B18 first. might let go for the right price.. let me know!
-7 bolt down-pipe for the T3 turbo custom for the 88-91 civic and maybe crx.. might have to bend the crossmember just a little bit and maybe some other fabrications.. all custom work by me and my friend in my garage with a gas MIG welder... NO CAT for this setup unless you cut and reweld some.. $60 its yours.. s/h talk to me.
-17" Konig Tantrums, with Khumo Ecsta 711's... in pretty bad shape, NEED powder-coating job done asap!!! they are silver but never took off all the paint that was on before so its got rigges it in.. cheap rims for just ***** and giggles!!!
$300 w/tires 2 tires have some camber wear, other 2 are pretty good.. s/h talk to me again!
UPDATE:
2" crush bent chargepiping for the 88-91 civic/crx.. all welded up, used with my FMIC off ebay.. also on is a 1G UN-CRUSHED DSM BOV welded to the piping.. willing to let everything go inlcuding the FMIC which i believe the core is 19x5x2.5, its the nicer kind off ebay.. but willing to let everything go for $300 SHIPPED OBO!! paid $225 alone for the FMIC and i used it for maybe 2 weeks.
that should be all for now.. talk to me if any more questions and again NO CAMERA... my ---- is LEGIT from what i say.. otherwise i guess i'll have the whole HMT people on me.
Mason
Okay first off i do NOT have a camera available to take pictures.. if you guys don't believe what i say i have, then find me..
-Apexi V-AFC 1, SOLD
-SS Autochrome manifold bought off ebay, new style with braces on it, all gaskets and bolts that came with it.. D16 mani.. search ~$180 shipped right? $110 Shipped! NEVER USED.
-88 CRX Si tranny, odd ball year.... little grind 1st - 2nd, not even 1/2 the time i speed shifted.. need it out of here. PICKUP - $50, for shipping talk to me.. ~70,000 miles on the tranny
-88 CRX Si 6000 mile flywheel and clutch, guarentee only 6000 miles on it and it WASN'T beat, get it out $75 SHIPPED
-D16z6 head with d16a6 intake mani with a stripped bolt on the IM, so IM won't come off unless you have a socket to take off stripped bolts or i'm sure someone can figure it out, i don't have time to work at it, ***FORGOT, ALSO COMES WITH DSM 390CC INJECTORS... 100k on head, get it outta here! $160 SHIPPED for all!!
-if the head is sold.. i'll drop the block... i have a 13LBS stock lightened flywheel not too long ago machined with a used exedy clutch (stage 1) held 13psi fine, still going for some while.. $60 shipped
-HF manifold with T3 adapter plate - SOLD
-Brospeed 88-91 civic/crx header... has a crack... been tried to re-weld a few times.. haven't found it yet... header and dp included.. its yours locally for $5 or shipped out for $25!
-BARE d16a6 head with rocker arm assebly.. no valves, springs, retainers, camshaft, cam gear... $30 shipped its yours... very well cleaned up.
-88-91 civic hatch (maybe others?) Thermal 2.25in MID-PIPE to a cust 2.25 CRUSH bent axle back with a tanabe-STYLE muffler, muffler is in damn good condition... $250.. s/h talk to me again.
-T3 .60/.63 turbo, very little shaft play... NO seals out when i ran it (1 month ago).. has stock wastegate at 4 psi.. o2 housing... very nice.. might keep it for my B18 turbo but i need the B18 first. might let go for the right price.. let me know!
-7 bolt down-pipe for the T3 turbo custom for the 88-91 civic and maybe crx.. might have to bend the crossmember just a little bit and maybe some other fabrications.. all custom work by me and my friend in my garage with a gas MIG welder... NO CAT for this setup unless you cut and reweld some.. $60 its yours.. s/h talk to me.
-17" Konig Tantrums, with Khumo Ecsta 711's... in pretty bad shape, NEED powder-coating job done asap!!! they are silver but never took off all the paint that was on before so its got rigges it in.. cheap rims for just ***** and giggles!!!
$300 w/tires 2 tires have some camber wear, other 2 are pretty good.. s/h talk to me again!UPDATE:
2" crush bent chargepiping for the 88-91 civic/crx.. all welded up, used with my FMIC off ebay.. also on is a 1G UN-CRUSHED DSM BOV welded to the piping.. willing to let everything go inlcuding the FMIC which i believe the core is 19x5x2.5, its the nicer kind off ebay.. but willing to let everything go for $300 SHIPPED OBO!! paid $225 alone for the FMIC and i used it for maybe 2 weeks.
that should be all for now.. talk to me if any more questions and again NO CAMERA... my ---- is LEGIT from what i say.. otherwise i guess i'll have the whole HMT people on me.
Mason
09-28-2004, 11:40 AM
#3
1.0 BAR
Join Date: Jun 2003
Posts: 217
Re:---- for sale... need money!!! firm but low prices!! all legit..
i'll take the hf manifold and the adapter plate for 55 dollars shipped. if it sounds good then email me back at my email at andyvaj@yahoo.com. we can talk more about shipping and all. thanks
09-28-2004, 08:00 PM
#5
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re:---- for sale... need money!!! firm but low prices!! all legit..
Drastik is legit and I've dealt with him and traded somethings with him and never had any problems with him. Mason, did you ever hear or check out that b18 I told you about?
09-28-2004, 09:49 PM
#7
0.0 BAR
Join Date: Aug 2004
Posts: 44
Re:---- for sale... need money!!! firm but low prices!! all legit..
Do you still have the v afc? my email is jc199989@yahoo.com
09-29-2004, 02:04 AM
#10
1.5 BAR
Thread Starter
Join Date: Oct 2003
Posts: 1,107
Re:---- for sale... need money!!! firm but low prices!! all legit..
no trades.. and i stated i don't have a camera.. seriously i basically am to the point of NEEDING money. V-AFC is pending now... dsm 390cc injectors only come with the z6 head and a6 intake mani! all sensors are there and working 100% and has the a6 TB on it.
Mason
also - henry i did not see anything about a B18.. but that might have to wait.. i have bills that were un-expected.. but might be able to clear it up.
Mason
also - henry i did not see anything about a B18.. but that might have to wait.. i have bills that were un-expected.. but might be able to clear it up.
