seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

ok, i've got a lot of ---- lying around that i need to get rid of. i don't have a garage and this ---- has literally taken over my laundry room. i don't have many pics of the stuff now, but i can get some this weekend, but as usual, everything is exactly as described. shipping will be from jacksonville, nc (28540).

1. 00 ex seats in MINT condition with si head rests. 75 picked up (figured i'd give it a try although there aren't many people local to me).
(seats are mint, they just have a little lint on them, and my camera lens was dirty, these pics don't do them any justice!)
http://www.draglab.com/hmt/projektegdizzle/seats1.jpg
http://www.draglab.com/hmt/projektegdizzle/seats2.jpg
http://www.draglab.com/hmt/projektegdizzle/seats3.jpg

2. ss obx b series header and generic intake combo!, i was rockin this temporarily between turbo's. no leaks, good fitment, no dents. 80 shipped for the combo!
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs4.JPG[/img]

3. 99-00 oem stock head lights. kind of foggy lens, but would clean up very easily, i wish i had time to clean them up b/c i'd rather rock these than my shitty fitment after market black housing 'jdm y0' head lights. 60 shipped
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs1.JPG[/img]

3. 3 2.5" silicon couplers (blue/red), with two t bolt clamps and misc other clamps. SOLD


4. 99-00 red/clear oem tail lights, pass side corner light has busted lens, other 3 are mint. SOLD
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs2.JPG[/img]

5. low mileage obd2 stock injectors (2 sets). no o-rings or seals. 10 shipped a set.

6. 22x8x13 avon radial slicks. tons of meat on them, at least 80%. they're not wrinkle walls, they're radials. i've never mounted used them, but i talked to people who have (before i bought them) and they said they were still able to pull 1.7-1.8 60's with them. they can kind of be seen in the pics of the seats. SOLD
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs5.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs6.JPG[/img]
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs7.JPG[/img]

7. 96-00 megan racing lca's (red in color). the bushings are worn, but you could fill them in with urethane just like you do motor mounts for only a couple bucks. SOLD
[img width=600 height=500]http://www.draglab.com/hmt/projektegdizzle/turbo2/fs3.JPG[/img]

8. two 90° 3" and one 45° mandrel bends. military green in color (they were intercooler piping on a military vehicle). you can also catch a glimpes of these in the pics of the seats. SOLD

9. NTK L1H1 wideband o2 sensor (used). has cut plug, but you can buy the plugs from techedge for less than 10 bucks. 30 shipped


this is all i can think of for now, i'm sure i'll add more ---- after i go home and look around.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

ill take the mandrel bends.Whats your paypal?

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

Money sent, thanks man

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

thanks bro, i'll ship them out tomorrow :)

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o s
 

Will you ship the seats? Please please? Those are Black correct? I know black sometimes looks dark gray in pics.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o s
 

na, they are dark grey. they are IDENTICAL to my 00 si seats, the only difference is the pattern on the cloth, or else i would put them in my car b/c they're in better condition than mine. i would ship them for shipping costs plus 10 for packaging them up, but i'm sure the price would be outrageous :-\

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

can ya post some pics of da LCAs, very interested. I dont really need the entire seat but id be interested in buying the head rest and trading you mine. LMK thanx.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

i won't sell just the head rest for the seats, sorry. as far as the lca's, look on ebay, they're the exact same one, but the bushings are a little worn, so i replaced them with some omni power lca's. if you filled the bushings in with some urethane window weld, they'd be good as new. i'm gonna try to get pics of everything this weekend, but i can't promise that i'll find time :-\

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

how much for the slicks if i pick them up? and are they on rims?

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

i'll give them to you for 50 if you pick em up jody. na, they're not on rims, but you could either put them on some hx rims, or get some steel wheels for about 40 bucks each new from a few different sites. you know anybody that will pick these damn seats up too :-[

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o s
 

Shipping seats its easy and not that expensive. 4 Boxes. You simply unbolt the 4 bolts and remove the seat backs. Package them separatly, 2 seat bottums/tracks and 2 seat backs. But ahh well I am looking for black. I dyed my blue to black and although they turned out nice they are just worn out and need a replacement.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

You have a pm.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

are they 13" or 14" kevin?

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

i might be interested in the wideband. does it come with a gauge or would i have to buy one. is it good quality, for tuning. thanks alot

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

it's just the sensor, you would still need a wideband controller (the acutal unit), the L1H1 sensors are 100+ just for the sensor's though, that's why most people opt for the wideband units that use the bosch sensors because they're cheaper to replace.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

I read somewhere in the title injectors ? What you got ? I need a set.

Good Day,
RH.

BUMP !

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

would the slicks fit on stock steelies? and can you email some better pics of them to jordan_112_zwickl@yahoo.com please and thank you

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

please get pics of the taillights,i'd like to see how bad that passenger side is.sux cas we got two drivers sides at work.lol.thanx

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

yeah, as long as 13" steelies will fit over your brakes.

i'll get some pics by sunday, but the busted light is trashed, the whole lens is busted out.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

emailed

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

sorry man, i meant to say vx, they're 13's :-[

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

could you do 80 shipped on the slicks?

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

i am VERY interested in the slicks. please let me know what u will do shipped. i have paypal waiting. let me know ASAP


Brett

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

I got dibs on those slicks, i been trying to contact him and havent heard back yet.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

will the slicks fit on stock Dx steelies, and under a droped 91 dx hatch? if so i'll take them

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

s1ngle how do you have dibs? i was the first person to reply about them so i should have dibs ???

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

I Pm'ed You. LMK.

Good Day,
RH.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

ok guys, a lot of people want these slicks and different people are pm'ing me with offers, 's1ngle' has the highest offer at 95 shipped, so, if no one beats that by tonight, there his. i'll also have pics up first thing tomorrow for the lights, lca's, header, intake, and slicks.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

sell me the si headrests ;)

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc. lots o stuff
 

bump for pics!!!!!!! slicks still aren't sold, so, first one to come up with 90, they're yours :)

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

what? I thought they were mine? I was waiting until today to pay you cause you said last night if nobody else came up with an offer theyre mine.....

I do have a few more questions.... so you bought them used? do you know how much they go for new?

and how can i pay you? whats your paypal? I dont know how I could have payed you yet.... let me know dude.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

oh, well, i never heard back from you last night. yeah, i bought them used, i personally never mounted them though, as you can see, one is still wrapped up from shipping to me. you can see in the pics they have TONS of meat on them though. i just googled it up, they're 183 EACH brand new. i'm sure i could sell them for more, but i'm just trying to get what i paid for them, i just need to make some room for my new slicks.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

so why arent you running them? getting some wrinkle walls? let me know youre paypal and i'll send you the dough.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

yeah, i never spent the time/money to get the appropriate rims, i have an si, so there's only a few rim choices i have in 13's. and yes, this is why i'm selling them now, some brand new hoosier 24.5" wrinkle walls 8) http://cgi.ebay.com/ebaymotors/ws/eB...MEWA%3AIT&rd=1

pay pal addy is 00projekteg@netscape.com

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

wait, youre saying you had few 13 inch rim choices, yet your new slicks are also for 13 inch wheels?? hehe

you've got paypal... thanks again man and pm me when you get them shipped with tracking info.

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

yeah, i'll be more motivated/willing to spend the 280+ for a set of 13" lenso's, if i have a brand new set of wrinkle wall hoosier's waiting to go on them ;) i've always wanted 13" slicks and never planned on running anything else, i just couldn't justify spending that much for a set of rims and putting a set of 90 dollar slicks on them :-\

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

will u sell me your Si headrests? im serious, or trade for my stock ones :P

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

Hey projekteg, please check your PM's/email

Re: seats, slicks, lights, injectors, silicon couplers, mandrel's, etc.*PICS NOW*
 

bump dizzle, still got some good shizzle :)