HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Turbo Parts For Sale (https://www.homemadeturbo.com/turbo-parts-sale-9/)
-   -   Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it (https://www.homemadeturbo.com/turbo-parts-sale-9/real-jdm-98spec-itr-swap-nice-come-get-84154/)

Acrite3404 09-21-2007 06:17 AM

Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
5 Attachment(s)
Ok im selling a jdm type r swap. It was in a hatch and now we pulled it out cause we are in need of money for our other project.

The Good:
Real jdm type r swap
Less than 16k
Aluminum flywheel
ACT clutch
with the 4.75 final drive
starter
rear bracket
halfshaft
alternator and everything else you see in the pics

the bad:
it doesnt have the lsd do to it blowing up from the previous owner. My friend had the tranny rebuilt without Lsd and replaced the case on the tranny because the other case was cracked from the lsd going out. All you need is axles and linkages. O and the reason for the black valve cover is cause the type r one was badly oxidized.

The other good is that are in need of money so the price is: $3400.00 firm

Attachment 23944

Attachment 23945

Attachment 23946

Attachment 23947

Attachment 23948

turbohf 09-21-2007 10:04 AM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
your mod speaking here... no ------ comments...let him sell his motor...

Smith-02 09-21-2007 11:36 AM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 

Originally Posted by turbohf
your mod speaking here... no ------ comments...let him sell his motor...

in all respect dustin, it was claimed that it wasn't his, aka one of the classified rules? feel free to delete, but i remember reading in the old thread that it wasn't his

95integra 09-21-2007 11:41 AM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
post a pic of the stamping

unsivil_audio 09-21-2007 12:48 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
Correct me if I'm wrong, I thought all ITR motors were "B18c5" whether they were JDM or USDM. And that the "B18c" was just a JDM GSR motor (slightly higher compression, also rated at 180hp instead of 170).

ryan89crx 09-21-2007 12:52 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 

Originally Posted by unsivil_audio
Correct me if I'm wrong, I thought all ITR motors were "B18c5" whether they were JDM or USDM. And that the "B18c" was just a JDM GSR motor (slightly higher compression, also rated at 180hp instead of 170).

you are wrong. there is no number at the end of JDM engine codes

Smith-02 09-21-2007 12:55 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 

Originally Posted by ryan89crx
you are wrong. there is no number at the end of JDM engine codes

welcome to federal emissions

Acrite3404 09-21-2007 02:07 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
JDM motors have no vin plates. And all real jdm motor do not have the number after the lettering and yes the jdm gsr is also a b18c the way you cant tell its a itr and not a gsr is from the green paint on the head unless you pull the head completely of and look at the pistons O and by the red valve cover, but we used the GSR valve cover cause the red one was oxidized pretty bad.

turbohf 09-21-2007 03:09 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
is it your motor or someone elses?

Acrite3404 09-21-2007 03:26 PM

Re: Real Jdm '98spec Itr swap(nice!!!!!!!!!!) Come and get it
 
its me and a friends motor and the motor is at my house. im selling it for both of use for another project.


All times are GMT -5. The time now is 10:34 AM.


© 2024 MH Sub I, LLC dba Internet Brands