PWR air/water, Audi FMIC cores, Tial BOV, Gauges, SMT-6 **UPDATE 07/26**
07-11-2005, 02:31 PM
#1
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
PWR air/water, Audi FMIC cores, Tial BOV, Gauges, SMT-6 **UPDATE 07/26**
*************UPDATED JULY 26th, 2005*****************
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PWR Air/Water, 4"x10", 2.25" inlet/outlet, in brand new condition, **NEW PRICE**$300 OBO (new is $490)
flow: 390cfm
pressure drop @ 7psi = 1.1 psi
overall length 15.75"
depending on cooling media temp drop from in to out can range from 50% to 100%
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tial 50mm BOV, great shape, silver with mild steel flange, it's setup for 7psi if I remember correctly when we bought it we had a choice of low boost or high boost. $150
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have 3 audi FMIC cores that I want to sell, I was going to make custom end tanks with them but am going a different route $40 + shipping obo each
1 core looks like this minus the end tanks:
$30 for this one since it's not cleaned up.
Other 2 are here:
$40 each
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autometer Z series gauges, have a electric oil pressure with sender and a EGT gauge with probe. both in MINT condition. Would like $50 for the oil pressure and $60 for the oil pressure. These Z series cost a little more then the regular gauges since they are black ringblack face.
here's a pic so you can see, the boost is NOT FOR SALE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Perfect Power SMT-6 Piggy back engine management system.
Installed into car for 1 week, been in box ever since, decided to go full standalone. All wires were not cut but used in full length therefore no wires will be short.
Have the install CD with all the help documents etc. and wiring diagrams, the wiring harness, the communication cable to hookup to your PC's serial port.
These sell for $400 Looking to get $300
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I will only accept Paypal, prices above are OBO because of you Jewbag lowballers so I know they will drop, prices are also + shipping, I'm in Canada and depending on what and where it costs quite a bit to ship.
PM me or e-mail me at jerome.michaud@gmail.com if you have any questions.
Paypal address is jays87mr2@yahoo.com
Jay
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PWR Air/Water, 4"x10", 2.25" inlet/outlet, in brand new condition, **NEW PRICE**$300 OBO (new is $490)
flow: 390cfm
pressure drop @ 7psi = 1.1 psi
overall length 15.75"
depending on cooling media temp drop from in to out can range from 50% to 100%
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Tial 50mm BOV, great shape, silver with mild steel flange, it's setup for 7psi if I remember correctly when we bought it we had a choice of low boost or high boost. $150
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I have 3 audi FMIC cores that I want to sell, I was going to make custom end tanks with them but am going a different route $40 + shipping obo each
1 core looks like this minus the end tanks:
$30 for this one since it's not cleaned up.
Other 2 are here:
$40 each
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Autometer Z series gauges, have a electric oil pressure with sender and a EGT gauge with probe. both in MINT condition. Would like $50 for the oil pressure and $60 for the oil pressure. These Z series cost a little more then the regular gauges since they are black ringblack face.
here's a pic so you can see, the boost is NOT FOR SALE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Perfect Power SMT-6 Piggy back engine management system.
Installed into car for 1 week, been in box ever since, decided to go full standalone. All wires were not cut but used in full length therefore no wires will be short.
Have the install CD with all the help documents etc. and wiring diagrams, the wiring harness, the communication cable to hookup to your PC's serial port.
These sell for $400 Looking to get $300
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I will only accept Paypal, prices above are OBO because of you Jewbag lowballers so I know they will drop, prices are also + shipping, I'm in Canada and depending on what and where it costs quite a bit to ship.
PM me or e-mail me at jerome.michaud@gmail.com if you have any questions.
Paypal address is jays87mr2@yahoo.com
Jay
07-14-2005, 12:52 PM
#8
3.0 BAR
Join Date: Jan 2005
Posts: 2,877
Re: Small Holset H1C, PWR air/water, modded Audi FMIC **PICS** **NEW PRICES**
i've got a freshly rebuilt D16a6 cyl head, d16 shortblock, CRX SI dash and door panels, EF d16 engien mounts, a lot of misc d16a6 parts, CRX Si front sway bar with poly end links, poly trailing arm bushings, and a buch of other misc suff
07-14-2005, 11:07 PM
#10
1.0 BAR
Thread Starter
Join Date: Nov 2004
Posts: 203
Re: Holset H1C trade for smaller turbo , PWR air/water, Audi FMIC **PICS**
Willing to trade the Holset for:
T3, K03, something similar of that size, maybe a 14B + something else
Depending on the turbo and condition, would just straight trade, we each pay shipping etc.
T3, K03, something similar of that size, maybe a 14B + something else
Depending on the turbo and condition, would just straight trade, we each pay shipping etc.
