Gsr, Y8, DC, EG, B-series, D series, Rotary, BIG ASS GARAGE SALE!!!!!!
#1
Gsr, Y8, DC, EG, B-series, D series, Rotary, BIG *** GARAGE SALE!!!!!!
I'm tired of all the ---- in my basement so hereit is... First off is a 13B rotary Engine. It's all assembled, just doesn't have rotors, a crank, or an oil pan on it. Just make an offer on it, and you can have it. I'm located in Reading PA, 19604. Thanks!
Oh yea, and I forgot I have both a fuel injection setup, and a carbeurated setup, for the 13B with a 4 barrel carb.
Here's some other stuff I have layin around also. Everything's best offer. Also add 3% for paypal, and shipping. I'm always willing to meet ppl too. I love driving. lol.
96 Y8 head. Dropped valves in cylinders 2 & 4. I honestly don't know what to ask for since in single cam, and needs work so just make an offer.
OBD1 DX intake manifold. $50 OBO
00 Y8 Intake manifold. If needed I can get the air injection welded up at work. I epoxied the holes shut but ended up finding the 96 head, and used that mani for the guy's car. $60
93 EG Si seats, front and back. MINTY FRESH!!! I'd rather these were piced up, but if you wanna pay shipping, I guess I can do it. $120 front and rear or $80 front, $40 rear... OBO!!!!!!!!
white power DC mirrors, with both plugs and plenty of wire. I think they're from a 2 door but not positive. $40
CRX Si floor mats. One is missing the CR the other is fine. I have to clean em up, but they're a lil beat! $25
99 DC black armrest. I actually might keep this to put in the EK I'll hopefully be getting, but if you want it, make an offer and I'd probably sell it.
00 EX injectors. I don't know what cc they are, but they were too big for my homies 96 DX. At least I'm guessin they were. It may have been the fuel rail, or FPR, ar the leaky intake mani. lol. No idea what they're worth so $ Best offer!
B18B crank, with (I was told) under 40K miles.- $75
LS valve cover- $40
and some more ----...
A brand new fuel pump. Master Fuel pump part #8023 I think. It's a pump for Turbo talons, Eclipses, and I think it even comes in older accords. Had one in my EG, it fit with a zip tie, and a lil muscle putting the lil hose on! $50
99 P2E ecu... it's automatic I think, 99 so it's OBD2B... I think again. whatever it's worth to you. I'll never need it.
95 GSR head, bare just has rocker assembly cam caps, glass beaded valve cover, and I'll trow in a set of port flow Ti retainers.- $350
GSR skunk2 intake manifold w/IACV, and IAT sensors-$180
I also have, but need to take pics of...
-89 CRX Si interior plastics, rear compartment, beat up door panels, a-pillar covers, and a buncha misc. parts.
-d15b7 full engine just disassembled. just missing, valve cover, cam gear, throttlebody, and main pulley. Will part out if you need anything at all!!!
-B18A short block, bare with tapped oil pan, and main caps. I need another oil pan, so trade me! I didn't tap the pan it was a friends, so don't hate on the ugliness.
-DA z3 fenders. one is missing the piece below the molding. You'd have to re-glass it. I can do it for you, but you'd have to pay me first!
Oh yea, and I forgot I have both a fuel injection setup, and a carbeurated setup, for the 13B with a 4 barrel carb.
Here's some other stuff I have layin around also. Everything's best offer. Also add 3% for paypal, and shipping. I'm always willing to meet ppl too. I love driving. lol.
96 Y8 head. Dropped valves in cylinders 2 & 4. I honestly don't know what to ask for since in single cam, and needs work so just make an offer.
OBD1 DX intake manifold. $50 OBO
00 Y8 Intake manifold. If needed I can get the air injection welded up at work. I epoxied the holes shut but ended up finding the 96 head, and used that mani for the guy's car. $60
93 EG Si seats, front and back. MINTY FRESH!!! I'd rather these were piced up, but if you wanna pay shipping, I guess I can do it. $120 front and rear or $80 front, $40 rear... OBO!!!!!!!!
white power DC mirrors, with both plugs and plenty of wire. I think they're from a 2 door but not positive. $40
CRX Si floor mats. One is missing the CR the other is fine. I have to clean em up, but they're a lil beat! $25
99 DC black armrest. I actually might keep this to put in the EK I'll hopefully be getting, but if you want it, make an offer and I'd probably sell it.
00 EX injectors. I don't know what cc they are, but they were too big for my homies 96 DX. At least I'm guessin they were. It may have been the fuel rail, or FPR, ar the leaky intake mani. lol. No idea what they're worth so $ Best offer!
B18B crank, with (I was told) under 40K miles.- $75
LS valve cover- $40
and some more ----...
A brand new fuel pump. Master Fuel pump part #8023 I think. It's a pump for Turbo talons, Eclipses, and I think it even comes in older accords. Had one in my EG, it fit with a zip tie, and a lil muscle putting the lil hose on! $50
99 P2E ecu... it's automatic I think, 99 so it's OBD2B... I think again. whatever it's worth to you. I'll never need it.
95 GSR head, bare just has rocker assembly cam caps, glass beaded valve cover, and I'll trow in a set of port flow Ti retainers.- $350
GSR skunk2 intake manifold w/IACV, and IAT sensors-$180
I also have, but need to take pics of...
-89 CRX Si interior plastics, rear compartment, beat up door panels, a-pillar covers, and a buncha misc. parts.
-d15b7 full engine just disassembled. just missing, valve cover, cam gear, throttlebody, and main pulley. Will part out if you need anything at all!!!
-B18A short block, bare with tapped oil pan, and main caps. I need another oil pan, so trade me! I didn't tap the pan it was a friends, so don't hate on the ugliness.
-DA z3 fenders. one is missing the piece below the molding. You'd have to re-glass it. I can do it for you, but you'd have to pay me first!
#3
Re: Gsr, Y8, DC, EG, B-series, D series, Rotary, BIG *** GARAGE SALE!!!!!!
head's pretty heavy so I'd say, 60+ shipping for the head and manifold together. I'm guessing about $90?? I'll check to be sure. I don't have a y7 ecu. just the p2e
#7
Re: Gsr, Y8, DC, EG, B-series, D series, Rotary, BIG *** GARAGE SALE!!!!!!
wel like the head, a block's heavy as hell. I'll check on shipping, but I'll let the block and crank together go for 150+ shipping I paid $90 for the Crank, and the oil pan's already tapped, so I figure that's a good deal.
#9
Re: Gsr, Y8, DC, EG, B-series, D series, Rotary, BIG *** GARAGE SALE!!!!!!
ok, shipping is too much of a pain in the ***, and I'm too busy to ship something that size. Sorry. Pickup only on anything that can't be shipped priority.