GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
6 Attachment(s)
This is a 1991 Honda Civic Hatch DX body with a 1990 d16a6 si engine and transmission w/ LSD clutch (Heavy Duty Plate with 6-puck sprung disk). I tried doing the MPFI conversion, but it didn't work out, I think it was the ecu which is now gone, you will have to get a new ecu. The engine was "devconned" when rebuilt, which included bore and hone, new pistons and rings, new main and rod bearings, all new gaskets including head gasket, new valve seals, and valves seated, head and block surfaced and thoroughly cleaned by machine shop, toga high volume oil pump. Compression checked at 180 on all 4 when I checked it about a month ago, which was after I stopped driving it. Also includes a second set of steelies with tires at about 80% tread left, SI seats and SI dash (both black), also SI gauge cluster with tachometer. 2.25" exhaust with magnaflow resonator, hi-flow cat, and muffler(muffler will need replacing, the rear fell off while driving and is scraped through the metal. Any other questions, just PM me.
I will also throw in an HF manifold, greddy turbo timer, autometer oil psi gauge, and 1G dsm bov all in working conditon. got backed into in a parking lot at 7 mph, the fender and door are bent in and rub together when the door is opened, no frame damage, and the door still opens very easily Attachment 28806 Attachment 28807 Attachment 28808 Attachment 28809 Attachment 28810 Attachment 28811 ONLY asking $300, pickup only, no delivery Thanks, Keenan |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Damn, wish you were closer!
Joseph, pick this bitch up for the PINKs car! |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Solid!
|
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
where is it?
|
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by Zeniceguycrx
where is it?
|
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by fourthgenhatch
The car is located in Fayetteville, GA 30214
So it just needs an ECU? Hmm. |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
It needs MPFI conversion finished - beyond you, Danno.
Consider it sold, Holmes. Check your PMs so I can arrainge pickup. |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by Joseph Davis
It needs MPFI conversion finished - beyond you, Danno.
Consider it sold, Holmes. Check your PMs so I can arrainge pickup. |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Start Asheville, NC 28801, US Revise | New Directions
End Fayetteville, GA 30214, US Revise | New Directions Total Est. Time: 3 hours, 59 minutes Total Est. Distance: 230.51 miles Sweet, easy two hour forty five minute drive each way. |
Re: GA 1991 Honda Civic Hatch DX with d16a6 not running good shell $300 EXTRAS
Originally Posted by chris
Hell Ya. pinks 2009 Ill be there
PS - I'll be at Pinks All Out in Rockingham a month from tomorrow. We'll do like Jeffs Gilbert + Creech did, and bring a nine second car claiming it's a ten second car. :P |
All times are GMT -5. The time now is 09:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands