full turbo kit, b16 head, gauges, injectors, wiseco, eagle, GOOD ----!
#1
full turbo kit, b16 head, gauges, injectors, wiseco, eagle, GOOD ----!
going all motor in my daily driver si, everything in my engine bay is for sale! complete turbo kit, or part out. prices are negotiable, but don't include shipping. i would like to sell the turbo, manifold, wastegate, down pipe, dump tube together since they're fabbed for eachoter, but will part out. don't bother low balling bishes.
1. complete b16a2 head. intake manifold, throttle body, valve cover, all sensors, fuel rail, injectors, b&M fpr, skunk 2 cam gears. 600 bucks.
2. b16 eagle h beams. used for approx. 3k miles SOLD
3. b series wiseco 8.8:1 (in a b16, comp. varies depending on what motor, i believe they're 9.2:1 with a gsr head). SOLD
4. b16 block with good crank (cracked sleeve), complete with new oil pump (3k miles), new water pump (3k miles). SOLD
5. RC 750 injectors (used for less than 2k miles) 225
6. no name hi flow b series fuel rail. comes with -6 an feed line. 75 bucks
7. clutch specialties 6 puck unsprung complete clutch kit with 3k miles. 200 bucks
8. standard brand 11lb flywheel with 3k miles. 100 bucks
9. b16 hydro tranny (less than 100k miles, flawless condition). SOLD
10. JRC 31x8x2.5 front mount intercooler, perfect condition. SOLD
11. 2.5" charge piping for ek and above mentioned intercooler with hks ssqv bov, all silicon couplers and t bolt clamps UPPER PIPE SOLD W/BOV. 75 bucks for turbo to i/c, i/c to driver side wheel well and all couplers/t bolt clamps and a 2.5" silicon 90° to come off the turbo SOLD
12. full 3" custom cat back exhaust for 92-00 couple (all mandrel bent, hooker 3" inlet/outlet turbo muffler, all hangers, v band clamp where it meets down pipe) 200 bucks
13. garrett 60 trim t3/t04e 60 trim. 2.5" outlet, 4" inlet used for 3k miles. no shaft play, perfect condition, alwawys ran with a k&N and atp oil restrictor. SOLD
14. tapped b series oil pan with nice bolt on flange. 40 bucks
15. bmc short tubular manifold flanged for t3 and 40mm wg. SOLD
16. tial 40mm wg with 11.8 psi spring, comes with dump tube (has light scratches on top). 200 bucks
17. complete stealthmode oil feed/return kit with atp oil restrictor for turbo. 50 bucks
18. 3" down pipe fabbed for above turbo, manifold, wg combo. comes with 8" flex section and 02 bung. SOLD
19. pyrometer egt gauge (silver face), complete with probe and all wires. 70 bucks.
20. autometer carbon fiber boost gauge (30 in/hg vacuum, 20 psi boost). SOLD
21. autometer carbon fiber oil pressure gauge (mechanical) with hard copper tubing, 35 bucks.
22. turbo xs mbc. 30 bucks.
23. brand new oem honda head gasket (b16, b17, b18c). 60 bucks (just paid 95 at honda today!)
24. used arp head studs (tq'd about 3 times). 40 bucks
25. complete 96-00 motor mount insert kit (prothane side mounts, es rear and lower torque mounts with the stock motor mounts 100 bucks
i think that's about it, some prices are somewhat negotiable, and some are pretty firm. everything is available to come look at in jacksonville nc and i'll try to find time to take pics of everything by this weekend, but all parts are mint, i always took meticulous care under my hood. help a brother out so i can try out all motor
1. complete b16a2 head. intake manifold, throttle body, valve cover, all sensors, fuel rail, injectors, b&M fpr, skunk 2 cam gears. 600 bucks.
2. b16 eagle h beams. used for approx. 3k miles SOLD
3. b series wiseco 8.8:1 (in a b16, comp. varies depending on what motor, i believe they're 9.2:1 with a gsr head). SOLD
4. b16 block with good crank (cracked sleeve), complete with new oil pump (3k miles), new water pump (3k miles). SOLD
5. RC 750 injectors (used for less than 2k miles) 225
6. no name hi flow b series fuel rail. comes with -6 an feed line. 75 bucks
7. clutch specialties 6 puck unsprung complete clutch kit with 3k miles. 200 bucks
8. standard brand 11lb flywheel with 3k miles. 100 bucks
9. b16 hydro tranny (less than 100k miles, flawless condition). SOLD
10. JRC 31x8x2.5 front mount intercooler, perfect condition. SOLD
11. 2.5" charge piping for ek and above mentioned intercooler with hks ssqv bov, all silicon couplers and t bolt clamps UPPER PIPE SOLD W/BOV. 75 bucks for turbo to i/c, i/c to driver side wheel well and all couplers/t bolt clamps and a 2.5" silicon 90° to come off the turbo SOLD
12. full 3" custom cat back exhaust for 92-00 couple (all mandrel bent, hooker 3" inlet/outlet turbo muffler, all hangers, v band clamp where it meets down pipe) 200 bucks
13. garrett 60 trim t3/t04e 60 trim. 2.5" outlet, 4" inlet used for 3k miles. no shaft play, perfect condition, alwawys ran with a k&N and atp oil restrictor. SOLD
14. tapped b series oil pan with nice bolt on flange. 40 bucks
15. bmc short tubular manifold flanged for t3 and 40mm wg. SOLD
16. tial 40mm wg with 11.8 psi spring, comes with dump tube (has light scratches on top). 200 bucks
17. complete stealthmode oil feed/return kit with atp oil restrictor for turbo. 50 bucks
18. 3" down pipe fabbed for above turbo, manifold, wg combo. comes with 8" flex section and 02 bung. SOLD
19. pyrometer egt gauge (silver face), complete with probe and all wires. 70 bucks.
20. autometer carbon fiber boost gauge (30 in/hg vacuum, 20 psi boost). SOLD
21. autometer carbon fiber oil pressure gauge (mechanical) with hard copper tubing, 35 bucks.
22. turbo xs mbc. 30 bucks.
23. brand new oem honda head gasket (b16, b17, b18c). 60 bucks (just paid 95 at honda today!)
24. used arp head studs (tq'd about 3 times). 40 bucks
25. complete 96-00 motor mount insert kit (prothane side mounts, es rear and lower torque mounts with the stock motor mounts 100 bucks
i think that's about it, some prices are somewhat negotiable, and some are pretty firm. everything is available to come look at in jacksonville nc and i'll try to find time to take pics of everything by this weekend, but all parts are mint, i always took meticulous care under my hood. help a brother out so i can try out all motor
#7
Re: full turbo kit, b16 head, gauges, injectors, wiseco, eagle, GOOD ----!
Not really sure but will the 2.5" intercooler piping fit my 95 Civic Coupe?? What exactlly does that come with? Piping and what. Does it include BOV of what? Just let me know what exactly come's with it?? Thanks for your time...
- Greg
- Greg
#10
Re: full turbo kit, b16 head, gauges, injectors, wiseco, eagle, GOOD ----!
Originally Posted by projekteg
going all motor in my daily driver si, everything in my engine bay is for sale! complete turbo kit, or part out. prices are negotiable, but don't include shipping. i would like to sell the turbo, manifold, wastegate, down pipe, dump tube together since they're fabbed for eachoter, but will part out. don't bother low balling bishes.