FS Thermal Arc Dragster 85 TIG Welder dirty cheap!!
#1
FS Thermal Arc Dragster 85 TIG Welder dirty cheap!!
I got this last year for christmas and used it twice. I'm just not out in the garage like I used to be. If your local then I've got a full tank of straight argon in a 80CF tank from Airgas.
Designed for Light Duty STICK ( SMAW or CC ) Welding.
1/16" and 3/32" E6013 Electrodes.
1/16" and 3/32" Stainless Steel Electrodes.
Scratch Start TIG Welding.
Output Range of 10 to 80 Amps.
Welds Material up to 1/8".
Plugs into Standard 115 VAC Receptacle.
Only Requires 20 Amps Circuit.
25mm Twist Lock Output Terminals .
Rugged output terminals allow easy polarity reversal and cable changes.
Heavy Duty 6 Gauge Welding Cables.
15 ft. Electrode Cable and Tweco Brand Electrode Holder.
10 ft. Work ( Ground ) Cable and Rugged Clamp.
Thermal Overload Protection.
Protective Case
TIG Kit: 12.5' Air Cooled TIG Torch w/ valve, accessory kit, 10 ft. gas hose regulator, and attached dinse connectors.
Like I said if your local I've got a 80CF tank of straight argon that basically full as I used the TIG about 3 minutes and didn't have the regulator opened up much. Also comes with a pack of filler rods. So if your local this would be a ready to TIG weld setup.
400 picked up with tank or 300 shipped for just the welder.
Designed for Light Duty STICK ( SMAW or CC ) Welding.
1/16" and 3/32" E6013 Electrodes.
1/16" and 3/32" Stainless Steel Electrodes.
Scratch Start TIG Welding.
Output Range of 10 to 80 Amps.
Welds Material up to 1/8".
Plugs into Standard 115 VAC Receptacle.
Only Requires 20 Amps Circuit.
25mm Twist Lock Output Terminals .
Rugged output terminals allow easy polarity reversal and cable changes.
Heavy Duty 6 Gauge Welding Cables.
15 ft. Electrode Cable and Tweco Brand Electrode Holder.
10 ft. Work ( Ground ) Cable and Rugged Clamp.
Thermal Overload Protection.
Protective Case
TIG Kit: 12.5' Air Cooled TIG Torch w/ valve, accessory kit, 10 ft. gas hose regulator, and attached dinse connectors.
Like I said if your local I've got a 80CF tank of straight argon that basically full as I used the TIG about 3 minutes and didn't have the regulator opened up much. Also comes with a pack of filler rods. So if your local this would be a ready to TIG weld setup.
400 picked up with tank or 300 shipped for just the welder.
#3
Re: FS Thermal Arc Dragster 85
Buy buy buy!!! The thing is basically brand new. I would prefer to sell it to someone with the tank as I'm looking to get out of cars for awhile and spend more time and money on the family.
#5
Re: FS Thermal Arc Dragster 85
To buy just the TIG package on ebay is 599 and then buying your own 80CF tank of argon and not leasing one is just over 100. Your saving 200 just for the kit shipped or with the tank for those who would pick it up.
#8
Re: FS Thermal Arc Dragster 85
I need this ****** gone! Besides being "stillnoturbo", I'm currently "stillnocar" lol. I sold my Galant VR4 and the Datsun 280Z is getting picked up this Wednesday and I still need some cash to buy the car I want...and need. Driving the wife's minivan is something no man should be driving. Don't worry....it'll be boosted.
Thread
Thread Starter
Forum
Replies
Last Post