FS: look traction bars added!! + other stuff
#1
FS: look traction bars added!! + other stuff
ok guys... i'm starting to feel like a crack head pawning off all his ----... thats what boost will do to you.
traction bar cross member, you finish it! most of the hard work has already been done all you need to do is bolt it up and draw an imaginary line through the lower control arm bolts and thats where your tie rod mounting location will be to maintain correct suspension geometry (or contact HMT's traction bar suspension geometry specialist Bambooseven for more literature), weld in some tabs, get some tie rods and your set. no more HOPPIN. you can finish this project with about $40-50 of parts.
$70 + shipping
i'm motivated to sell this stuff so... if you buy the head and long block together $120+ you pay for shipping!!
Z6 head with all internals, its been out under the porch with a tarp over it so its got some slight surface rust on some of the bolt heads but mostly cosmetic, no solinoid or valve cover. i was given to me for a favor and i haven't personally seen it run. but it looks decent. -$60 shipped
large pics so check'em out here
http://tinypic.com/1dy91d
http://tinypic.com/1dy97k
Z6 shortblock 100k still ran very good when dismantled but has a leaky main seal. i preffer local please.
-$75 picked up or you pay for ship
more pics here
http://tinypic.com/1dy68y
http://tinypic.com/1dy6as
Z6 intake manifold w/no injectors. $50+shipping
94+integra master brake cylinder $50 shipped obo
<<<last call on 96 gsr wheels with tires! 190+ship>>>
PM5 ECU $25 shipped obo
OEM 14b turbo coolant lines $7 shipped
new actuator from t25
$10 shipped
Ice Man intake tube for all D series
$25 shipped
Ive had more people inquire about this welder than i thought there was gonna be. well listen up! persistence. If you can weld with this its gauranteed you can weld with any other machine with ease and your welds will look like a ------- million bucks. buy this... help a fellow HMT member take advantage of the TunerToys 229+shipping, made in china rods.
Harbor freight 90amp wirefeed welder. i bought it basicly to weld up my charge pipe/down pipe and now i have no use for it. It worked flawlessly for my project, the only complaint is that its a little underpowered to do anything heavier than exhasut pipe. It worked perfect for welding exhaust pipe and especially for beginners its sitting in the original box. $80+shipping
people who actually do DIY projects will tell you this things welds!
traction bar cross member, you finish it! most of the hard work has already been done all you need to do is bolt it up and draw an imaginary line through the lower control arm bolts and thats where your tie rod mounting location will be to maintain correct suspension geometry (or contact HMT's traction bar suspension geometry specialist Bambooseven for more literature), weld in some tabs, get some tie rods and your set. no more HOPPIN. you can finish this project with about $40-50 of parts.
$70 + shipping
i'm motivated to sell this stuff so... if you buy the head and long block together $120+ you pay for shipping!!
Z6 head with all internals, its been out under the porch with a tarp over it so its got some slight surface rust on some of the bolt heads but mostly cosmetic, no solinoid or valve cover. i was given to me for a favor and i haven't personally seen it run. but it looks decent. -$60 shipped
large pics so check'em out here
http://tinypic.com/1dy91d
http://tinypic.com/1dy97k
Z6 shortblock 100k still ran very good when dismantled but has a leaky main seal. i preffer local please.
-$75 picked up or you pay for ship
more pics here
http://tinypic.com/1dy68y
http://tinypic.com/1dy6as
Z6 intake manifold w/no injectors. $50+shipping
94+integra master brake cylinder $50 shipped obo
<<<last call on 96 gsr wheels with tires! 190+ship>>>
PM5 ECU $25 shipped obo
OEM 14b turbo coolant lines $7 shipped
new actuator from t25
$10 shipped
Ice Man intake tube for all D series
$25 shipped
Ive had more people inquire about this welder than i thought there was gonna be. well listen up! persistence. If you can weld with this its gauranteed you can weld with any other machine with ease and your welds will look like a ------- million bucks. buy this... help a fellow HMT member take advantage of the TunerToys 229+shipping, made in china rods.
Harbor freight 90amp wirefeed welder. i bought it basicly to weld up my charge pipe/down pipe and now i have no use for it. It worked flawlessly for my project, the only complaint is that its a little underpowered to do anything heavier than exhasut pipe. It worked perfect for welding exhaust pipe and especially for beginners its sitting in the original box. $80+shipping
people who actually do DIY projects will tell you this things welds!
#3
Re:FS: 96 gsr six spoke wheels/welder
Originally Posted by iluvmysh
anyone want to confirm that this is sufficient to weld up charge pipes and exhaust pipes? if so, i'll take it
Originally Posted by evosol
It worked perfect for welding exhaust pipe and especially for beginners its sitting in the original box.
I vouche for evosol.
#8
Re:FS: z6 head/ z6 shortblock/welder
I have the same welder and it works great for turbo projects.
Interested in the shortblock. Got any pics?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
Interested in the shortblock. Got any pics?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote