FS: je pistons, eagle rods, t3/t4, wastegate, intercooler, piping, ramhorn, 550s
12-24-2006, 11:31 PM
#1
1.0 BAR
Thread Starter
Join Date: Dec 2002
Posts: 205
FS: je pistons, eagle rods, t3/t4, wastegate, intercooler, piping, ramhorn, 550s
I have a set of rc 550cc injectors for sale. they are in perfect working conditions, comes with a resistor box. asking 275 obo
I have aluminum intercooler piping made for an integra. its all 2.5" and comes with couplings and t bolt clamps. it is 3 pieces, if shipped, will be cut into 4 pieces and additional coupler/clamps will be added. asking 270 obo
also have an intercooler for sale. it is from a powersrtoke diesel truck, cut in half with custom end tanks. its pretty big, ill have to get the measurements tomorrow. the inlet/outlet are 3". has a few bent fins, nothing major. has aluminum mounting brackets welded on for an integra. asking 200 obo. only pic i have of the i/c right now is this one:
core measures 27 x 11 x 2.5. BOV not included, but also for sale.
I have a set of brand new, never been used JE 9.0:1 81mm std bore pistons with rings for sale. asking 400 obo
Also have a set of eagle H beams,for an ls brand new, never been used. comes with rod bearings. asking 400 OBO
also have a b18a block, it was honed for the pistons mentioned above. crank is in perfect conditions, asking 200 obo
buy pistons/rods/block together and get it for 800
also have a set of b16 stock rods, askign 80 obo
I have a b series ramhorn that is a/c and p/s compatible with minor modifications( as with all ramhorns). Biggest turbo I got to fit on it was a t3/t04e .60/.63. Im sure an s housing would fit with some more modifications. its flanged for a t3, and right now it has a tial 38mm wastegate flange on it, but it will be cut off and repositioned for accepting the a/c compatibility. it may be changed out for a 44mm or w/e wastegate flange if desired. manifold is made out of sch 10 304l stainless with mild steel threaded flanges.
I have a used t3/t04e .60/.63 turbo for sale. has a stage v turbine wheel. the front side is semi polished. there is a cut on the inlet, but does not affect performance and can not be seen when a filter/coupling/velocity stack is put on. asking prics is 400 shipped obo
also have a tial style 38mm wastegate, in perfect operating conditions, never given me any problems. asking 125 shipped obo
aim: speedisntkillnme
email: herman@hermsfab.com
I have aluminum intercooler piping made for an integra. its all 2.5" and comes with couplings and t bolt clamps. it is 3 pieces, if shipped, will be cut into 4 pieces and additional coupler/clamps will be added. asking 270 obo
also have an intercooler for sale. it is from a powersrtoke diesel truck, cut in half with custom end tanks. its pretty big, ill have to get the measurements tomorrow. the inlet/outlet are 3". has a few bent fins, nothing major. has aluminum mounting brackets welded on for an integra. asking 200 obo. only pic i have of the i/c right now is this one:
core measures 27 x 11 x 2.5. BOV not included, but also for sale.
I have a set of brand new, never been used JE 9.0:1 81mm std bore pistons with rings for sale. asking 400 obo
Also have a set of eagle H beams,for an ls brand new, never been used. comes with rod bearings. asking 400 OBO
also have a b18a block, it was honed for the pistons mentioned above. crank is in perfect conditions, asking 200 obo
buy pistons/rods/block together and get it for 800
also have a set of b16 stock rods, askign 80 obo
I have a b series ramhorn that is a/c and p/s compatible with minor modifications( as with all ramhorns). Biggest turbo I got to fit on it was a t3/t04e .60/.63. Im sure an s housing would fit with some more modifications. its flanged for a t3, and right now it has a tial 38mm wastegate flange on it, but it will be cut off and repositioned for accepting the a/c compatibility. it may be changed out for a 44mm or w/e wastegate flange if desired. manifold is made out of sch 10 304l stainless with mild steel threaded flanges.
I have a used t3/t04e .60/.63 turbo for sale. has a stage v turbine wheel. the front side is semi polished. there is a cut on the inlet, but does not affect performance and can not be seen when a filter/coupling/velocity stack is put on. asking prics is 400 shipped obo
also have a tial style 38mm wastegate, in perfect operating conditions, never given me any problems. asking 125 shipped obo
aim: speedisntkillnme
email: herman@hermsfab.com
12-25-2006, 10:03 AM
#3
1.5 BAR
Join Date: May 2004
Location: Westminster,MD
Posts: 1,032
Re: FS: je pistons, eagle rods, t3/t4, wastegate, intercooler, piping, ramhorn,
He must think he's on Honda-Tech. ***** we're all broke...and sure as hell won't pay near new prices for the ---- you pulled off of your ricer.
