FS: Honda, Acura, Nissan, Subaru Parts....Updated *4-16-07*
 

I'm cleaning out my shop and have a whole bunch of Honda, Acura and other various parts for sale.If you don't like my prices make, me a reasonable offer. I'm moving into my new shop and don't want to have to move all this stuff..

B16 stuff:
OBD2 B16 Timing Belt (Brand New) $40
OBD2 B16 Power Steering Belt (Brand New) $10
OBDO B16 Timing Belt (Used for about 500 miles) $20Oil Pump $20
Water Pump $20
Cams $30
Crank $20
Crank Pulley $5
Stock Air box w/intake tube. $30,

B18 stuff:

OBD 1 B18 Complete head. Has a 4 bent valves from some one screwing up putting on a new timing belt, other than that, complete $50
B18B1 Complete short block. Ran fine when pulled, has high miles (145k) $150
Used Stock Rods and Pistons $40
Crank Shaft (spun a bearing on #2 rod, will need machined) $40
Water Pump $20
New Timing Belt $40
Stock exhaust Mani $35
Oil Pan $20
Windage Tray $10
Starter $40
Alternator $50
Accel 8mm Spark Plug Wires $40
New OBD0 Cap and Rotor $15
Stock Flywheel $10
Stock cam gears $5
Stock cams $20
Stock flywheel, clutch, pressure plate and throw out bearing. $50

EG Stuff:

JDM Black housing headlights with city lights, JDM amber corners, and JDM yellow fogs with wire harness and dash switch for EG $250
Battery Tray $5
Black housing corner lights $15
Stock headlights $20

EF stuff:

DX stock ecu $10
Clutch pedal $5
B series Clutch cable $20
Brake master cylinder $30
Front and rear suspension w/ hubs $75
Si throttle cable $20



DA Stuff:

Rear Tail Lights (MINT Condition) $40,
Power mirrors $10
Rear View mirror $5
Stock front lip $15

Other Misc:

*Apexi Turbo Timer $50

*Misc Tial Waste Gate Springs $10 each

*Eibach Lowering Springs (came off a 97' Accord) $40

*Honda 4-wire O2 Sensors (have 4) $35 each

*Volvo turbo injectors $30

*OBD2 D series Distributor Casing $5

*2 OBD0 Ignition Coils $20 each

*EK Radiator Overflow bottle $5

*Auto Meter Monster Tach W/ shift light $75.

*B series power steering pump w/brackets $20

*94' Integra A/C system with everything. All hoses, piping, pump, condenser, drier, bolts, and brackets. This is everything that you need to go back to a/c. $200

*Adjustable Fuel Pressure Regulator $30

*OBD 0 Injectors ( 3 sets) $20 Each

*OBD 1 Injectors (2 sets) $20 Each

*OBD 0 Ignition Coils (2) $20 Each

*D Series Vehichle Speed Sensor $20

*No name short shifter $5

*KA24E 5 Speed tranny, Shifts smooth, 120k, $150

*KA24DE, runs strong, good compression, complete longblock(minus the exhaust mani) $300

*Subaru chrome SVX wheels, no tires, $200

*Subaru stock am/fm/cd/cassette stereo $20

I have a lot of other parts laying around, just can't think of them all right now. I can get pics of the parts upon request. Hit me up, I might have what you need. Keep in mind that all prices are OBO. I am open to any reasonable offer..I accept paypal and can arrange shipping. Shipping for anything that can fit in a flat-rate box, is $5, everything else depends on location and weight. Paypal users add 3% to all totals. All items are shipped with tracking #'s. Located in WA 98801

Re: FS...Cleaning Out The Shop
 

post pics for the tach

Re: FS...Cleaning Out The Shop
 

Are your prices including shipping??

Re: FS...Cleaning Out The Shop
 

Got a intercooler that will fit in 90 crx? ;D ;

Re: FS...Cleaning Out The Shop
 

lets see a pic of the tach

Re: FS...Cleaning Out The Shop
 

Ricers :P

Re: FS...Cleaning Out The Shop
 

its not for me, I alerad have mine, it looks great with all my other gauges and other ricer ----.

Re: FS...Cleaning Out The Shop
 

For the smaller parts, shipping is $5 and for the larger parts it will depend on location. I will try to get some pics posted later tonight.

Re: FS...Cleaning Out The Shop
 

Oh, and no, I don't have any intercoolers.

Re: FS...Cleaning Out The Shop
 

Take $75 shipped for the chipped PR3? Got paypal waiting, let me know.

Re: FS...Cleaning Out The Shop
 

The vtec solenoid and PR3 ecu are sold. Also have a '94 Nissian Altima 2.4 DOHC. Runs strong,good compression, doesn't smoke, but leaks a little out of the oil pan (gasket probably) $375 OBO. Willing to trade for turbo stuff.

Re: FS...Cleaning Out The Shop
 

once again te tach

Re: FS...Cleaning Out The Shop
 

PIC of the tach. Attachment 31423

Re: FS...Cleaning Out The Shop
 

I'll take the tach of you still have in about a week.

Re: FS...Cleaning Out The Shop
 

First one with the $ takes it.

Re: FS...Cleaning Out The Shop
 

I'll vouch for this guy, got my ECU just fine.

Re: FS...Cleaning Out The Shop *NEW*
 

Also have a new set of 90-91 B series axles. $100

Re: FS...Cleaning Out The Shop *NEW*
 

Willing to trade for turbo parts for B series, or will pay cash.

Re: FS...Cleaning Out The Shop *NEW*
 

got a ls short block

Re: FS...Cleaning Out The Shop *NEW*
 

No, I'm looking for one myself. ;)

Re: FS...Cleaning Out The Shop *NEW*
 

Some one take this stuff of my hands. I need a little extra cash to finish my project!! Forget the listed prices, make me a reasonable offer and it's yours!!!

Re: FS...Cleaning Out The Shop *NEW*
 

got any pics of the 88-91 head lights?

Re: FS...Cleaning Out The Shop *NEW*
 

what kind of cams and vavle train stuff. is it stock?

Re: FS...Cleaning Out The Shop *NEW*
 

Yeah they're just stock B16 cams, as is the rest of the valvetrain parts.

Re: FS...Cleaning Out The Shop *NEW*
 

Pics of lights Attachment 31320

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

I also have some shop tools for making custom enclosures and interior pieces that are for sale. Pm me and I can send pics and info.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Also have a new greddy e-manage. Not sure what it's worth, but as far as I can tell, They seem to go for $250-$350. I will try to get pics up tomorrow. Looking to get $275 OBO.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Ive got that same tach It's a nice piece. I know their ricey but ever since I swa that OLd DIP video where their bouncing that railbug off the shift light at night I wanted one. anyway bump for a lotta ----.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

do u still have the obd-0 b18 dizzy if so 60 shipped lmk thanks mike pay pal ready

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

All pm's replied.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Need a FMI for an EF9 and a 92-00 half size radiator. Have paypal waiting or will trade for the parts listed.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Have pics up now.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

PM'd you about the valve cover.

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

BUMP for prices and new pics

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

ill give you $30 shipped to 98284, wa for the si gauge cluster

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Sold. PM'd

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Bump for new stuff

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

still have the seats? what year teg are they from?

Re: FS...Cleaning Out The Shop *NEW PRICES*
 

Yeah, I still have them. They came out of a 91.

Re: FS...Cleaning Out The Shop *TAKING OFFERS*
 

Bump for any offers. Really need this stuff swooped up to make a little extra cash. :6