FS: GA. BUILT ZC D16 Full swap
 

Okay guys school is starting soon and i have to pay tuition. So I decided to sell my built ZC engine with trans. This engine has literally less than 5 miles on it. After I built it and installed it into my civic, I took it around the block a couple times. This engine should support up to 400hp and even more If you have the supporting mods(injectors/turbo setup). I've seen guys with similar, yet the same setup make 460hp on stock sleeves.

This engine and trans is being pulled out as we speak. Be ready for a new thread for the part out!

If there is no interest in buying the whole engine/trans swap, then i will de-assemble the engine and part it out.


Specs:

JDM ZC engine (same as a D16A6, but JDM Spec)

Vitara Pistons ( est. c/r is 7.5 c/r)
-with new piston rings

Tuner Toys Billet rods with ARP 2000 Rods bolts

KMS Block Guard

Cometic 3 layer metal head gasket

ACL RACE crank and rod bearings

Ported and Polished Head

JG Engine Dynamics Valve Springs and titanium retainers

ALL NEW seals, gaskets throughout the whole engine

ARP Head Studs

GSR Throttle Body

DSM 450cc Injectors

Findanza 9 Pound flywheel

XTD Stage 3 clutch pressure plate (needs to be broken in)

JDM S20 trans (no grinds)

I do have the shift linkages and EF Polyurethane filled mounts to go with it.

NOTE: the Hasport hydraulic to cable conversion can go with it for a extra 200 dollars firm.

PRICE:
$2000 obo

CONTACT METHOD:
PM ME, or PM ME for a phone number

Thanks for looking!

beginning to the end
http://i6.photobucket.com/albums/y21...Picture116.jpg

tuner toys rods compared to the stock rods( the new vitara pistons installed)
http://i6.photobucket.com/albums/y21...dHonda/046.jpg

Engine assembled
http://i6.photobucket.com/albums/y21...dHonda/049.jpg
http://i6.photobucket.com/albums/y21...dHonda/050.jpg

Head after the ported/clean up (half of the new valve springs were installed)
http://i6.photobucket.com/albums/y21...dHonda/072.jpg
http://i6.photobucket.com/albums/y21...dHonda/014.jpg

http://i6.photobucket.com/albums/y21...dHonda/026.jpg

Engine installed (only pictures i have of the engine after i assembled it)
http://i6.photobucket.com/albums/y21...21708027-1.jpg
http://i6.photobucket.com/albums/y21...21708028-1.jpg
http://i6.photobucket.com/albums/y21...21708047-1.jpg
http://i6.photobucket.com/albums/y21...a/21708033.jpg

A picture shortly after took the engine out
http://i6.photobucket.com/albums/y21...a/P5170523.jpg

Re: FS: GA. BUILT ZC D16 Full swap
 

Bump, This engine and trans is being pulled out as we speak. Be ready for a new tread for the part out!

Re: FS: GA. BUILT ZC D16 Full swap
 

damn way over priced for a built d series.

Re: FS: GA. BUILT ZC D16 Full swap
 

i would say so. is that the shipped price, and is the oil pan filled with platinum

Re: FS: GA. BUILT ZC D16 Full swap
 

Well since the engine was started up and driven down the street and removed the engine out, i believed the price was fair with the engine having < 3 miles. Since i bought all the parts new and it's well even for my asking price. And the price was for the full swap.
The short block is sold.
Thanks for your concern!

Re: FS: GA. BUILT ZC D16 Full swap
 

It would be worth more with 0 miles on it, who knows why you only ran it for 3 miles then pulled it out to sell it :S

Re: FS: GA. BUILT ZC D16 Full swap
 

Well im a full time student and have a full time job. So i have literally ZERO time for this project.