FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

dead thread

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

i got dibs on studs and pistons and rods and.... but i need pics dude. hurreee!

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

studs are in the block; they're not coming out; ever...

i'll get pix tomorrow promise. i'll pull the engine/trans out

/edit: and not to be mean but I dont do dibs. whoever has money first gets them. too many times people who call dibs never buy things so i stopped doing it.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

dibs on clutch. do these prices include shipping?

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

no dibs and prices are not shipped; clutch and flywheel i'll do for $210 shipped as it is practically brand new. $30 off new and it comes with hardware

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

Rods aren't out so your unsure about the health of the #4 rod that's why it is iffy? Now sorry to ask, but what's wrong with the TunerToys rods?


JP

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

NEED TRANNY FOR D16Z6 AND IF NO \BODY GETS THAT CLUTCH /FLYWHEEL COMBO ILL TAKE IT

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

condition of the a6 240's any fuel rail to go with them

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

nothing is wrong w/ them but if you may recall the company made the crank end too long at nearly 77mm instead of 75 to fit in a d16 bore. i didnt buy them from tunertoys but another company that tried to ---- me in a deal so i kept the rods. you can have them machined down to fit in a stock or slight overbore d16 or if you're running a 77mm bore they'll drop right in :p they're new and unused as i got a set of eagles instead of fighting with these.

they worked as far as i know; got some dsms instead; sorry no fuel rail except the y7 one on the y7 manifold

dont have a z6 transmission; all i have are ef cable tranies sorry. and clutch/flywheel is first come first serve

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

how much for the manifold? will it fit my zc since they are both d series

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

how much for the manifold? will it fit my zc since they are both d series

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

Thank you. Did you happen to check the "iffy" rod and see if it's okay or not?


JP

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

ill give you $50 shipped for the radiator. :)

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

You know i'm not sure; if the header flange is the same then yea it will.


not yet; just got home. may not get to pull my motor tonight; some things came up i have to take care of

heh; i have a neon radiator that i'm not using; it fits better in an EF. i bought it and never got around to putting it in.
with my built b i'm going to ahve to have a custom thicker core rad built but i'm going to keep the eg half rad for now

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

how much shipped for the z6 block to 26505 , wv thx

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

probably around $75 or so shiping for just the block; crank may up it some its farily bulky and heavy

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

how much for the manifold?

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

$265 shipped

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

did you check the rods yet

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

So how's that iffy rod? If its good I got paypal sitting and waiting! Just lmk.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

Small update guys. I've spent the last couple of agonizing hours in the hospital so I haven't gotten anything taken out today. My best friend from high school crashed his bike today and wasn't wearing a helmet. They dont think he'll make it so i'm at a loss right now; my brain has shut down.
I probably wont get around to tearing this ---- out for a while unless something miraculous happens so i'm sorry those of you who are interested and waiting. It will happen eventually though; i may work on it to keep my mind off of things later but for now I'm not sure.

Anyway; to those of you who have bikes; USE YOUR ------- HELMET

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

sorry to hear about your friend

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

Sorry to hear that. I'll be sure to pray for you, friends, family, and him. Good luck.


JP

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

he wound up not making it.

i'm going to be away for probably a few weeks; this hit me a lot harder than i anticipated. life really sucks right now. i'l be back eventually

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

I want the srp pistons and the eagle rods for 300 shipped to 30263

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

I knew a kid who raced a car on his bike, the car got pissed when he lost and cliped the back end at 100+

He was pronounced dead 7 or 9 times. Its been a year and I think hes still going through rehab. Sory to hear that. Let me know whrn you get back please;.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

Hey man, remember HMT will be here when you decide you're ready.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

ok guys; i'm back in business; read the updated post for more.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

bump and thread has been updated

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

BUMP; buy my ----

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

how much for the rota slips?

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

So how's the fourth eagle rod? I know originally it said iffy. If its good to go, I'll take the rods.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

not for sale :)

I've been told it can be reused; needs to be resized and honed but htat it still shouuld be good. I still need to get my dad's cam and take pics of it all; i'll do that soon I hope.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

still interested in those pistons, what kinda deal would you work for both the pistons and rods?

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

the price i have posted + shipping. I have tons of interst in them. I just need to get pix and to do that I have to steal my dad's cam which is proving harder than normal.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

bump

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

you still got the pistons????

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

yesssssssssssssssss...

they're not in the sold list. i'm going to try to get pics of everything tonight; pistons/rods will be included in those.

I'd like to sell the pistons and rods as a set; i dont want to take them apart.

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clutch
 

you have pm

Re: FS/FT: ALL OF MY BUILT D16 parts: ram-horn; forged internals; VTEC head; clu
 

I didnt get a pm you may resend it