FS: DSM Blue Top 450cc Injectors
12-14-2007, 04:35 PM
#1
0.5 BAR
Thread Starter
Join Date: Jul 2007
Posts: 89
FS: DSM Blue Top 450cc Injectors
-Professionally Flow Tested, Freshly cleaned and Balanced.
-Come with flow sheet of before and after results.
-All Filter Baskets, O-Rings, upper grommets and Pintle caps replaced with NEW parts.
We take an entire batch (sometime 30 or 40 at a time) and perform our cleaning and flow testing service and take the BEST matching sets and pair them up for sale.
Pictures are for example, the injectors you get may not be the EXACT same set pictured but are the same part.
Injectors are $110 shipped in the lower 48 states.
Injectors can also come with NEW clips for an additional $8 when buying the injectors. None of that used, cracked, cut down to the clip with no wire lead BS from others.
Are you going to need a resistor box? Not sure how to wire it or dont feel like messing with it and cutting up your harness? No problem, I also have jumper harnesses available with the resistors already soldered in line. No need to cut up your harness to run these injectors. These are $17.50 each
Also... If you have any Blue or Black top DSM Injectors you are looking to get rid of let me know. We are always looking for them and buying them. Even if you have only 1 or 2, let me know. Sometimes I have uneven numbers or an injector is beyond repair and are left short... So PLEASE let me know what you have available.
Thanks
-Come with flow sheet of before and after results.
-All Filter Baskets, O-Rings, upper grommets and Pintle caps replaced with NEW parts.
We take an entire batch (sometime 30 or 40 at a time) and perform our cleaning and flow testing service and take the BEST matching sets and pair them up for sale.
Pictures are for example, the injectors you get may not be the EXACT same set pictured but are the same part.
Injectors are $110 shipped in the lower 48 states.
Injectors can also come with NEW clips for an additional $8 when buying the injectors. None of that used, cracked, cut down to the clip with no wire lead BS from others.
Are you going to need a resistor box? Not sure how to wire it or dont feel like messing with it and cutting up your harness? No problem, I also have jumper harnesses available with the resistors already soldered in line. No need to cut up your harness to run these injectors. These are $17.50 each
Also... If you have any Blue or Black top DSM Injectors you are looking to get rid of let me know. We are always looking for them and buying them. Even if you have only 1 or 2, let me know. Sometimes I have uneven numbers or an injector is beyond repair and are left short... So PLEASE let me know what you have available.
Thanks
12-18-2007, 01:05 AM
#9
0.5 BAR
Thread Starter
Join Date: Jul 2007
Posts: 89
Re: FS: DSM Blue Top 450cc Injectors
Originally Posted by ososlohatch
kinda pricey
We clean and flow test and match them up in the best matching pairs and provide you with a chart. This service is $15 per injector ($60)... adding the two together gets you over the $110 price I am selling them for.
And to answer the other question, Yes, we are a HMT Sponsor with www.KGParts.com and out cleaning service can be found here on that site: http://kgparts.com/index.php?page=fuelinjectclean
We also have a site dedicated to injector cleaning with lots of good info about injectors in general. That site is www.injector-rehab.com
Lots of good info on Fuel Injectors ca be found in our "charts" section. http://injector-rehab.com/kbse/kbindex.htm
lots of calculators to play with as well.
This site is still under construction as things are added all the time. 
