FS: D-series CDM manifold, A6 head, Delta 272 cam
11-03-2007, 11:53 PM
#1
3.0 BAR
Thread Starter
Join Date: Mar 2004
Posts: 1,729
FS: D-series CDM manifold, A6 head, Delta 272 cam
Hey guys,
All these items are off my current setup, they're all working great I'm just changing things up over the winter.
1) D-series CDM/Drag style manifold, looking for 100 bucks + shipping, the wastegate hole has been ground out so it's actually closer to being a true 38mm hole.
2) D16A6 head, has maybe 3K miles on it. New valveseals, 3 angle valve job, was milled enough to get it flat (not much, a thou or two was taken off) and it was mildly ported (cleaned up the casting a bit, smoothed some of the transistions.) Looking for 100 bucks + shipping. I've been revving this to 8K for the last 2 months every day with no problem.
3) A6 Delta 272 cam, also approx. 3k miles on it. Works well, idles kinda lumpy, pulls hard up top. Great budget cam. I'd like to sell this with the head, but I will separate it if someone wants it on its lonesome. Looking for 75 bucks + shipping.
All prices are OBO, so shoot me some offers.
All these items are off my current setup, they're all working great I'm just changing things up over the winter.
1) D-series CDM/Drag style manifold, looking for 100 bucks + shipping, the wastegate hole has been ground out so it's actually closer to being a true 38mm hole.
2) D16A6 head, has maybe 3K miles on it. New valveseals, 3 angle valve job, was milled enough to get it flat (not much, a thou or two was taken off) and it was mildly ported (cleaned up the casting a bit, smoothed some of the transistions.) Looking for 100 bucks + shipping. I've been revving this to 8K for the last 2 months every day with no problem.
3) A6 Delta 272 cam, also approx. 3k miles on it. Works well, idles kinda lumpy, pulls hard up top. Great budget cam. I'd like to sell this with the head, but I will separate it if someone wants it on its lonesome. Looking for 75 bucks + shipping.
All prices are OBO, so shoot me some offers.
11-05-2007, 02:40 PM
#8
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: FS: D-series CDM manifold, A6 head, Delta 272 cam
Originally Posted by Snafubmx234
I'll take the head + cam. This is cool with the current valuvetrain as long as I don't rev too high, correct? 55419 is my zip. Let me know a price shipped.
11-05-2007, 05:15 PM
#9
3.0 BAR
Thread Starter
Join Date: Mar 2004
Posts: 1,729
Re: FS: D-series CDM manifold, A6 head, Delta 272 cam
Originally Posted by chris
The a6 valve springs are way over beefed from the factory. Especially the delta cam is small in the world of a6 cams no worries set rev limiter to 8000 and impress the neighborhood.s]
Cam + head are pending.
Originally Posted by noboostedEGo
80 shipped for manifold right here
