turbo4life

wat kind of issues are you having .. purgin.. like your water gets pushed out the radiator and then the ---- over heats i had taht before never figured out wat was wrong after 2 gaskets replaced and head resurfaced once then just sold the car n/a.. this was on my old eg it had a y8 block in it and z6 head..

Slo_crx1

Cast steel piping. They're used out here for some gas line stuff, so they had some lips around each edge of the pipes I ground down and butt welded together. Because it's cast steel I heated the piping with a torch first before I welded it on the highest amp setting on my mig. The welds aren't the prettiest, but the manifold is strong as hell...tested it during construction by bolting it to the motor and lifted on it with an engine hoist. It ended up picking the entire front end of the car off the ground, so after a second weld pass I was satisfied it was strong enough.

I think it's probably a head gasket that's leaking under boost. The first couple of weeks it ran like a raped date, then overheated once. Re-burnt a basemap I was using and it ran fine for a while afterwords up until about 2 weeks ago where it started doing it every day.

Slo_crx1

Got some new pics...
Evo8 fmic...$80+shipping


Downpipe with flex section...$40+shipping


Bov mounted on top charge pipe, I have an aluminum flange for this as well...*sold*


Turbo, mani, and 38mm wastegate, also has a brand new stainless mani->turbo flange gasket in between that I put on 2 days ago :P ...$100+shipping for the turbo, $40+shipping for the manifold, wastegate sold...


Pic of the 7cm^2 exhaust housing, the "070" designates a 7cm unit, while 060 means 6cm...

Pic of the stock wastegate hole welded shut...


2.5" stainless steel T-bolt clamps, I have 10 in total...*sold*


All the charge pipes, no leaks...


My homemade mbc ...$10 shipped


How about my little 1/2 rad mount bracket I made, I'll take an offer in it if someone wants it lol...


Used 14b/6cm^2 mani to turbo gasket, gimme $5 for it if you want it...


I'll take offers on the stuff posted, I need to get rid of this asap. Like mentioned, I'd rather off it as one whole deal, but this is HMT...cheap parts are king here lol.

E-b0la

What do you want for the wastegate + dump tube shipped to 05262? Or are you trying to keep the whole mani+turbo setup complete? LMK

Slo_crx1

I'd be willing to part it out if I can sell everything pretty quickly, but the wastegate's already been spoken for if it does get parted.

mra4886

if parted how much for ic piping and coupler/clamps? also is it 2.5in?
just lmk. you can pm me or just post. thanks.

Slo_crx1

I'll let the whole setup go for $400+shipping...C'mon guys I need this gone fast.

Also willing to do some kind of trade for:
Stock pr3 pistons
Gsr cams
B-series header

Slo_crx1

Bring it on up. I'll even cut a deal if nobody wants the manifold so they can use it on their D-series build

HybridHatch88

PMed