Re: FS: complete turbo setup for ED/EF chassis
 

wat kind of issues are you having .. purgin.. like your water gets pushed out the radiator and then the ---- over heats i had taht before never figured out wat was wrong after 2 gaskets replaced and head resurfaced once then just sold the car n/a.. this was on my old eg it had a y8 block in it and z6 head..

Re: FS: complete turbo setup for ED/EF chassis
 

Cast steel piping. They're used out here for some gas line stuff, so they had some lips around each edge of the pipes I ground down and butt welded together. Because it's cast steel I heated the piping with a torch first before I welded it on the highest amp setting on my mig. The welds aren't the prettiest, but the manifold is strong as hell...tested it during construction by bolting it to the motor and lifted on it with an engine hoist. It ended up picking the entire front end of the car off the ground, so after a second weld pass I was satisfied it was strong enough. ;)

I think it's probably a head gasket that's leaking under boost. The first couple of weeks it ran like a raped date, then overheated once. Re-burnt a basemap I was using and it ran fine for a while afterwords up until about 2 weeks ago where it started doing it every day.

Re: FS: complete turbo setup for ED/EF chassis
 

Got some new pics...
Evo8 fmic...$80+shipping
Attachment 27325

Downpipe with flex section...$40+shipping
Attachment 27326

Bov mounted on top charge pipe, I have an aluminum flange for this as well...*sold*
Attachment 27327

Turbo, mani, and 38mm wastegate, also has a brand new stainless mani->turbo flange gasket in between that I put on 2 days ago :P ...$100+shipping for the turbo, $40+shipping for the manifold, wastegate sold...
Attachment 27328

Pic of the 7cm^2 exhaust housing, the "070" designates a 7cm unit, while 060 means 6cm...
Attachment 27329
Pic of the stock wastegate hole welded shut...
Attachment 27330

2.5" stainless steel T-bolt clamps, I have 10 in total...*sold*
Attachment 27331

All the charge pipes, no leaks...
Attachment 27332

My homemade mbc ;D...$10 shipped
Attachment 27333

How about my little 1/2 rad mount bracket I made, I'll take an offer in it if someone wants it lol...
Attachment 27334

Used 14b/6cm^2 mani to turbo gasket, gimme $5 for it if you want it...
Attachment 27335

I'll take offers on the stuff posted, I need to get rid of this asap. Like mentioned, I'd rather off it as one whole deal, but this is HMT...cheap parts are king here lol.

Re: FS: complete turbo setup for ED/EF chassis
 

Well I few of the guys ive tuned cars for and I went to the dragstrip today. One car was an H22 swapped hatch and the other was an older gsr swapped hatch. The H was running 14.2 and the gsr was running 14.5 L0L and my boosted accord was running 14.6's that was the best I could do and I got about 20 passes.

Re: FS: complete turbo setup for ED/EF chassis
 

What do you want for the wastegate + dump tube shipped to 05262? Or are you trying to keep the whole mani+turbo setup complete? LMK

Re: FS: complete turbo setup for ED/EF chassis
 

I'd be willing to part it out if I can sell everything pretty quickly, but the wastegate's already been spoken for if it does get parted.

Re: FS: complete turbo setup for ED/EF chassis
 

if parted how much for ic piping and coupler/clamps? also is it 2.5in?
just lmk. you can pm me or just post. thanks.

Re: FS: complete turbo setup for ED/EF chassis
 

I'll let the whole setup go for $400+shipping...C'mon guys I need this gone fast.

Also willing to do some kind of trade for:
Stock pr3 pistons
Gsr cams
B-series header

Re: FS: complete turbo setup for ED/EF chassis...*new price...$400*
 

Bring it on up. I'll even cut a deal if nobody wants the manifold so they can use it on their D-series build :S

Re: FS: complete turbo setup for ED/EF chassis...*new price...$400*
 

PMed