StinkyFeet

I can get these in any length or diameter... Just let me know your custom requests.





This one currently listed on ebay:
http://cgi.ebay.com/ebaymotors/ws/eB...MESE%3AIT&rd=1
-------------------------------------------------------------------
This is for a 14 inch long Steel braided Oil return line for turbocharger, or other application. Fittings were professionally crimped, using 3/4 inch brass fittings. Dont trust your engine to poorly crimped hoses.

Use for vierity of vehicles. Great for Honda / Acura / Nissan / Toyota applications.

See photos for more detail. Email for more info.
3/4 Plug bolt is available apon request.. you must ask for it.
---------------------------------------------------------------------

I can also get most fittings, adaptors, if needed. Just let me know.

MikeJ-2009

One problem. The drain line for honda's will vary from 6 inches to 14 inches depending on the manifold/turbo. While trying to come up with a barb-less return line I ran into the same problem. At least one of the ends has to not be crimped.


EDIT: And the male brass fitting can't be welded to the pan.

StinkyFeet

thats why I said I can get custom lengths. You just measure, and I make... Easy breesy.
you drill a 3/4 hole in the pan, and use a fitting with a nut, and a large (3/4) washer. That'll hold it great.. Then I jb weld around it, just to make sure its water-tight.

D-ROB178

how much for 5/8 drain line need 1 foot.lmk

StinkyFeet

Pm'd
$55 + 5 s/h

hotrex

for 55 bucks i better not have to jb weld it.

hotrex

and for the record, that hose costed you about 7 dollars to make.

StinkyFeet

For the record (again) I dont make them myself. I get them locally from a shop that makes them. And they charge me $35-40. So im only making around $15 bucks per hose. I am not attempting to rip anyone off (i can show you reciepts as proof of my cost)

Mabye I should start making them myself. I'll look into it.