Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Hey all, I'm parting out my Mini-Me swap and going to a full on B
I'm located in Ottawa IL, 61350, and my email is dasfinc@hotmail.com I have a Fresh D16Y8 head, I had a machine shop do the valves *And they replaced 2 that were bent*, And I had them mill it and pressure test it to make sure everything was clean and new. *Sub 1 thousandth mill so it doesn't affect timing at all* The head has been on my mini-me swap for a few months, but the car has hardly been driven *I didn't torque my headstuds down enough and the headgasket let go right away*, I have the paperwork to show it was redone, and its in great shape, it also comes with an AEM Tru-Time adj. Cam gear WITH a FULL D16Y8 intake manifold with a fuel rail, injectors, throttlebody, and adjustable FPR. I had this on the head mentioned above, this is a Manual intake manifold so its what you'd need to do a intake manifold swap on a D16A6 or Z6, and it comes with EVERYTHING listed above, FULL manifold! $250 picked up or delivered with 40 miles of 61350!!! (I spent $250 on the valve work, mill, and pressure test alone, I will not take less as this is a full head with Vtec solenoid and valve cover and an adj. cam gear) *Here is a picture of it before it was on my motor* I'll even throw in a aftermarket Tri-Y Header!!! https://i26.photobucket.com/albums/c...E/PIC-0204.jpg |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Bump for $100 price drop on the head!
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
How about make one thread with all of your stuff in it from now on.
Good luck with your sales. |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by CSaddict
How about make one thread with all of your stuff in it from now on.
Good luck with your sales. |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Interested in the cx tranny... Are you willing to ship it??
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by flacopower
Interested in the cx tranny... Are you willing to ship it??
I have a spare CX trans with a bad main bearing for $20, and a EX trans with a bad input shaft bearing for $50 if you are interested in either of those. either one would most likely be $60 to ship due to the size/weight if you are interested. |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Back up, Good deals!
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by dasfinc
Back up, Good deals!
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
I would prolly take the d15b8 block./ & the guy above can take the tranny....
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by RandysSOHC
I would prolly take the d15b8 block./ & the guy above can take the tranny....
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
damn man...
if I was only closer... //but it is only 7 hours....lol |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by RandysSOHC
damn man...
if I was only closer... |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Back up to the top, GREAT deal for a fresh head with an adj. AEM Cam gear.
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Bump, Combo deal now! Take it ALL for a steal!!!
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Another big ol' Price drop!
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Hey, im interested in building a VTAK setup. I have a d16y7. What do you have including whats listed in this thread that I will need to do a y7/y8 build.
|
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
Originally Posted by dasfinc
the working CX transmission on the D15B8 is not getting separated from the motor as I am just pulling the whole thing out and want to be done with it.
I have a spare CX trans with a bad main bearing for $20, and a EX trans with a bad input shaft bearing for $50 if you are interested in either of those. either one would most likely be $60 to ship due to the size/weight if you are interested. free bump |
Re: Fresh D16Y8 head, D16Y8 intake manifold, and a D15B8 full motor and trans
how much do you want for the intake mani:?
|
All times are GMT -5. The time now is 05:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands