F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
ALL PARTS - MAKE AN OFFER
I can provide references from ebay, probetalk.com, mx6.com, or turboforum.net all parts in Mount Joy, PA (Near Lancaster) Zip 17552 i'm selling a T3 turbo that was from a Nissan 280zx- it's a Garrett T3 with a .63 a/r hot side and a .60 a/r cold side...it's at or about a 60 trim IIRC. The 280z's had a 2.8 liter straight 6 in it. It comes with an internal wastegate and actuator (stock spring is set at 7psi) and the stock downpipe (2.5"). I've sandblasted and cleand up some of the parts to make it a little nicer. Very little shaft play- I've taken it to some people who know turbos and they all tell me it's within spec. Wastegate moves freely and actuator works. The BAD: To be totally honest- One of the bolts that holds the internal wastegate on broke as I was taking it apart- i drilled it out but the hold needs to either be fitted with a stud or simply be re-tapped. I have it back together now and with the other 4 bolts in place, the wastegate is still very secure and i don't feel it will leak but i haven't tested it. With that said, the turbo looks good and spins great. asking $150 shipped OBO SOLD Compressor http://njsr.org/pics/albums/userpics...l_IMG_2574.JPG Compressor Comparison http://njsr.org/pics/albums/userpics...l_IMG_2582.JPG Overall http://njsr.org/pics/albums/userpics...l_IMG_2578.JPG Turbine http://njsr.org/pics/albums/userpics...l_IMG_2579.JPG Downpipe http://njsr.org/pics/albums/userpics...l_IMG_2583.JPG Internal Wastegate http://njsr.org/pics/albums/userpics...l_IMG_2587.JPG Complete http://njsr.org/pics/albums/userpics...l_IMG_2589.JPG Tubular Turbo Manifold for a DSM 4G63(T) engine I have a used tubular exhaust manifold for the 4G63 engine. It's flanged for the stock turbo (or the several other turbos that use the stock flange). I got it used with a crack in but i cut out the damaged section and welded in a new pipe. It's not coated nor painted but for an extra fee, i can have it ceramic coated black. Some of it is sandblasted and some is still black from the previous owner- i had to sandblast it to weld it. There is not rust on it- it's discoloration from the heat of welding. The flange can be cleaned up before shipping too. I also had to fill in a small crack in the collector itself but it's good to go now. In the first pic, you can see the new part- it's on the furthest right side runner- the pipe that goes into the collector itself. Again, with it coated you won't see it at all but i think it looks fine now. http://njsr.org/pics/albums/userpics...l_IMG_2338.JPG http://njsr.org/pics/albums/userpics...l_IMG_2339.JPG http://njsr.org/pics/albums/userpics...l_IMG_2341.JPG Asking $100 obo shipped i stress the best offer part....i don't need it/want it |
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
How much picked up for the turbo? What what do you mean about the downpipe not lining up?
|
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
picked up- $120?
sorry...i posted that on another forum- one for Ford Probes and i was talking about the turbo kits used on them...gotta go edit that since it doesn't matter on this forum. |
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
i actually bought a nissan turbo with the same numbers but i only need the waste gate parts and down pipe would you be willing to seperate? i could come pick it up i live about 40 miles away
|
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
You have a pm
|
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
replied to your PM Qikenuf
Jimbob- if Qikenuf doesn't want the WG or DP, i'll let ya know and they are yours. |
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
ok pm would be best, as i have a tendancy to forget what i reply to
|
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
will a .42/.48 wastegate section bolt up to this?
this way i don't have to change my downpipe and ----. thanks |
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
honestly i don't know- i know the Garrett turbos that Nissan used sometimes had a unique bolt pattern but i'm not 100% if it will bolt up.
sorry- maybe someone else can help. |
Re: F/S: T3 Turbo and 4G63 Tubular Turbo Manifold CHEAP
it's a 7 bolt pattern on this t3 turbo.
|
All times are GMT -5. The time now is 11:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands