IowaTCoupe

Long story short~ I’m done with D series, and moving on to an LS B18a1.

Many of these parts came out of my 95 civic ex with less than 3K miles on the new parts. My civic was not my daily driver, and I was always changing my setup. This is why I have so many different parts, and low miles. I was pushing 350+hp, and cracked the sleeves of two different blocks ( I did not run a block guard ).

I am willing to trade for:
B18/B16 hydraulic tranny
B18 turbo manifold to fit external wastegate and T3
B18 forged / aftermarket pistons
255 walbro fuel pump
Required mounts for a B18a1 into a 95 Ej (coupe)



Pictures of all listed items are at the bottom

Prices are pretty FIRM. Due to how much crap I have for sale, I don’t want to be talking with many people about different prices… I think my prices are VERY fair.
Prices listed below are with out shipping fees.
Items less than 10 lbs have a $12.00 UPS/fedex standard shipping rate. Larger items are subject to additional shipping costs.


For D16:
ACT Xtreme 4 puck clutch disc
ACT Xtreme 1700 lbs pressure plate
OEM Brand new Flywheel
This package comes with ACT pressure and release bearings in box. Clutch has less than 800 miles. This thing held STRONG. Great clutch. 380 new without flywheel. I still have the original box. (See in pic)
Asking 280$


D16 Turbo Manifold
Mani looks amazing, and is very strong. Turns heads, and looks awesome under hood. Fits 35/38mm wastegates, and T3 turbo flange. About 5K miles on this mani.
$275


D16z6 transmission.
Sold


D16 Distributor
Bought brand new in May 2006. Less than 3K miles. Comes with cap and rotor also
$75

D16 Oil Pump
New during last engine rebuild ( I always use new parts when re-building). Less than 3K miles.
$35

D16 Water pump
Same story as the oil pump above:
$25

D16z6 Head VTEC
Sold

D16 VTEC valve cover
Sold

D16z6 intake manifold.
Comes with all sensors attached. Throttle body and fuel rail included. Injectors not included. Manifold is CLEAN!!! I was always a fan of having a clean engine bay… This mani is very clean.
$50 solo or add $30 for Combo with Head.

D16 Eagle H beam rods.
Less than 5K miles on these. They have been through two cracked sleeves, but no damage was done to these, or the pistons that were attached to them.. They are still MINT!!! Great for new engine rebuild. These are 375 new I believe.
Asking $270

D16 JE Forged pistons .02 over stock bore. 9.0:1 compression ratio
These pistons were in the engine when a block’s sleeve sustained a hair line crack. Pushing 350+hp cracked the sleeve… when I woke up in the morning and tried to turn the motor over, the cylinder was filled with coolant. The pistons are still GREAT to run in a built motor. JE / SRP pistons all have one issue however: The intake relief area on the piston is VERY thin, and this part of the piston becomes a hot spot. You will see the small gap in the pictures, but this gap WILL NOT affect the ring seal of the piston, nor will it effect combustion. (you will need new rings for a new build of course)
Asking $200 for all 4 alone… Or COMBO deal: just add $150 with the Eagle rods. (they are hung on the rods right now.

D16 SRP forged pistons .01 over stock bore. 8.5:1 compression ratio
PAPER WEIGHTS… I had these in my very first built motor… I suffered detonation… ended up bending a Tuner Toy rod… The intake reliefs of these pistons are UGLY!!! Show off how you blew up a Honda motor
$8 each, or $20 for all 4.

D16 oil pan (x 2)
One is drilled and tapped for Turbo return. One is stock. The tapped pan is SHINY! But could use some lovin~ the tapped pan DOES NOT LEAK a drop!!!!
$30 for tapped pan, $25 for stock pan

D16z6 bare block.
This block has a cracked sleeve (picture) Throw some sleeves in and boost away!!!
$40 plus shipping


D16 PARTS
I have lots of D16 block parts… coolant lines / canisters / hoses… cranks, girdles, stock pistons and rods, lots and lots~ need anything, shoot me a price and the part you need.

D16 axles out of a 95 civic (stock 92-95 civic EX axles) $50


B18 PARTS:

I have a whole B18a1 engine extra that I don’t need. (about 115k miles)
$200 I would rather not ship this item. It does not have a valve cover, oil pan, or throttle body. Everything else is included.

B18 flywheel and clutch disc and pressure plate (all stock) $10 a piece plus $12 shipping. $15 for shipping flywheel


B18 cable tranny~ Looking for hydro trade, B18tranny or B16 tranny


B18a1 LS Rods, maybe pistons (if i get new forged pistons and H beams)
$60


OEM black shift **** and Red leather / chrome shift ****. $5 each.
Red ignition wires $15
Horns $5 each

Pictures:






D16 tranny and block:





B18 cable tranny:

redex04

are these parts in Iowa or where r u located?

IowaTCoupe

I am in Rhode Island. I went to college in iowa~

ryan89crx

ill vouch for this guy, good seller

redex04

might b interested in the clutch i will let u know tho

IowaTCoupe

everything is still for sale.

IowaTCoupe

bump for good deals

samson

LOVE the manifold. I can assume NOT A/C and P/S compatible, huh? What brand or who fabbed it? No WG for sell? Beautiful gear.


JP

lkailburn

eagle rods are 299 shipped new. want to lower that price? just to verify also, i don't see the rod bolts, you have them correct?

IowaTCoupe

Where do you find Eagle rods for $299?
If you can show me, i'll lower the price a bit, but the rods are still MINT CONDITION... absolutely no wear on them.
Yes, they come with ARP bolts also. (not in picture)



The manifold IS POWER STEERING friendly. I dont know about A/C because i took that out 2 years ago... however, with the t3 mounted with the downpipe on the driver side, i believe it will fit w/ a/c If you are creative w/ a custom Downpipe.


I have not sold anything yet!!!! everything still for sale!