Crossmembers for EF's
 

I will be finishing up another Crossmember and ready to ship by monday. Any takers?
150+shipping(usually 30 or so)

I will be posting on Ebay if no on wants it here.
http://www2.propichosting.com/Images/421591352/21.jpg
http://www2.propichosting.com/Images/421591352/19.jpg
EG Rad mounts I have made once for slow90hatch. I was a little unhappy with how low the rad sat below the crossmember, but it works, clears the hood, stands upright, but requires a slim fan or mounting/converting your stock one as a pusher
http://www2.propichosting.com/Images/421591352/23.jpg
http://www2.propichosting.com/Images/421591352/20.jpg
This design is also available. This one has a D-series mount. I will be playing around with a B-series mount this week.
http://www2.propichosting.com/Images/421591352/14.jpg
http://www2.propichosting.com/Images/421591352/16.jpg

Re: Crossmembers for EF's
 

taking trades? if not what your price?

heres my stuff f/s
https://www.homemadeturbo.com/forum/...?topic=37575.0

Re: Crossmembers for EF's
 

Might be interested in the MSD unit. But more interested in just selling. I broke and going to school all summer!!(Engineering that why I can Solidmodel and Cosmos Stress Analyze these things) (no working for but weekends and making parts!) PM me.

Re: Crossmembers for EF's
 

well its yours if you want it. lmk. if not maybe some day i'll have the cash. how much $$? c'mon trade.

Re: Crossmembers for EF's
 

I edited with a cost.

Re: Crossmembers for EF's
 

The more I think of it, the more I want the MSD. I was eventually going to get the Mallory because of it's Pill-less design, and I have used one on other cars before, but this might be another idea. Specially seeing as it is designed for SC's

Re: Crossmembers for EF's
 

any pics on a car

Re: Crossmembers for EF's
 

Um, ya, but the problem is there are on my rent's(parents computer). I'll try to get them today.

Re: Crossmembers for EF's
 

How many of these do you have?

Re: Crossmembers for EF's
 

yea lets see pics of them installed. keep my offer in mind. i'll have pics of my stuff tomorrow hopefully

Re: Crossmembers for EF's
 

I can post installed pics this tommorow. As for how many I have, I have i ready to go, but I am constantly making them. If need be I can have 2 ready to go this weekend. I normally ship on Monday or tuesday because I build them at my shop on weekends.

Re: Crossmembers for EF's
 

i love my crossmember, fits perfect eg rad and al just ordered a slim fan on ebay and it works great ;D


thanks
richie

Re: Crossmembers for EF's
 

Thanks richie for the good feedback. I like hear of happy customers.

Good luck with LS Race Car

Re: Crossmembers for EF's
 

Damn, I wish I had money but if you make them constantly I will order one in the future

Re: Crossmembers for EF's
 

No problem. Let me know when your ready.

Re: Crossmembers for EF's
 

Any pics of one installed in a car yet ? Have many have you sold ? Any positive feedback on someone that uses your bar ?

What material do you use ? What is it's thickness ? Any warranty ?

Any chance you make one with a dseries front mount location and eg radiator mounting points ?

Good Day,
RH.

Re: Crossmembers for EF's
 

I have sold 3 to people on this site and 1 on ebay. slow90hatch likes his. ! is waiting shipment and CivicZC is the other.

They are made out of 1/8 wall mild steel, either 1x1 or 1.25x1.25. As for warrenty. I'm just a guy who make these, not a major company like full-race with the backing up. Thats why my prices are lower then theres.

as for EG rad and d-series engine, yup.

PM me. This post will be locked soon I believe.

Re: Crossmembers for EF's
 

I Pm'ed You.

Good Day,
RH.

Re: Crossmembers for EF's
 

would you mind giving me the specs on it? maybe I could pay you for them? I'll try to check back to this thread, but if it gets locked for whatever reason please pm me, thanks.

Re: Crossmembers for EF's
 

these crossmembers are not for performance reasons???

Re: Crossmembers for EF's
 

Let me know as soon as you have that B-Series cross member done.

Re: Crossmembers for EF's
 

What type of specs are you looking for? I've already state what the are made and such. Pay me for them? If you want specs for building them yourself, There is no real secret, just research and make prototypes to see what works best. You have to get you radius arm positions and angle proper to ensure no binding.

As for "not for performance reasons???"
What do you mean? A crossmember eliminate rubber bushings, which under heavy load compress, allowing you suspension to move in ways that cause wheel hop. By using heim joints, the lower control are is set to where you place it. No more laterail motion causing wheel hop. This will increase traction for better 60' times. Also for over handling, due to the swing of the heim being greater then the compression of a rubber bushing, the suspension has greater articualation.

Anything else.

For a b-series mount, I was going to use my buddy's crx to fabricate the mount on, but I did not come back from the paint shop like it was intended too.

Re: Crossmembers for EF's
 

like specs to where everything is at, centers of holes, where each of the bars needs to be, measurements for the eg radiator mounts, all of those numbers. I can't measure things on something worth ----, but I can measure materials fairly well, that's why I ask.

Re: Crossmembers for EF's
 

I don't know any measurements. I made 1 perfect fit bar once on my car which is parked for the winter, took that bar, and made a jig. That's how each bar is made. So I can't really give you measurement. Every time you cut a peice of metal, it has to be fenesed.

Re: Crossmembers for EF's
 

So no B-Series mounts, atleast for awhile longer?

Re: Crossmembers for EF's
 

I need one with a b series trans mount, when will you have them?

Re: Crossmembers for EF's
 

nevermind, don't need the b series front trans mount , do you still have them?

Re: Crossmembers for EF's
 

how bout a crane hi-6 and a ps-9 coil? (i have the coil to dist wire too ;) )

Re: Crossmembers for EF's
 

^^^^^
HUH?

Re: Crossmembers for EF's
 

whats this welded with.

also any pics of the welds before paint.

Re: Crossmembers for EF's
 

MIG, Not at the moment but I'm finishing one tonight.

Re: Crossmembers for EF's
 

Hey wussup dude, I haven't received a response from you yet for the last email I sent you. Try emailing me again.

Good Day,
RH.

Re: Crossmembers for EF's
 

possible to get an cross member with an H series mount? I know this is alot to ask but doesnt hurt to try.

Re: Crossmembers for EF's
 

I would say no seeing as I don't know of anyone with that combo.

Re: Crossmembers for EF's
 

basically this but older model.

http://www.cranecams.com/include/sho...=heading&id=73http://www.cranecams.com/include/sho...heading&id=981

Re: Crossmembers for EF's
 

edit: w00t real coil pics.

http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg

the box is gold in colour. model hi-6 w/ dial rev limiter. wires were cut short though.

Re: Crossmembers for EF's
 

Why are you posting that here?

You think I want to trade for a coil?

Got an MSD Already!

Re: Crossmembers for EF's
 

Re: Crossmembers for EF's
 

Who locked this?

or did i accidentally lock it??? ???

::unlocked for now::

Re: Crossmembers for EF's
 

I did. There's a "commercial add" rule that says there's no free advertising for endless product. I've already discussed this with the seller. Everything is cool.