bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Last updated 04/11/2005
LOWERED THE PRICES AGAIN
Ok, now I got my website back up so I uploaded all my pics. Any pics are available by request, just ask if you need anything. Everything is OBO, shipping is from utah, if you live close by I usually will knock off a few bucks because shipping is cheaper. Everything is described as accurately as possible. Just added some new items today!

Looking to trade for:
B series header
Spoon N1 axleback
Black EG door panels without tweeters
TypeR style shift knob
Beaks kit with ITR rear sway or comptech rear sway kit
OEM EG foglights

I have more than my fair share of vouches.

Email = bambbrose@hotmail.com
AIM = bambbrose1
msn = bambbrose@hotmail.com
or PM me here.

12" Diamond CM312D4 Sub with custom built box made just for this sub. Hits extremely hard and sounds great. Selling to pick up a smaller 8" sub in a smaller box cause I don't need one this loud. This thing is powerful.
$225 shipped for both, shipping is gonna be a lot. Local pickup for both is $175. Will sell them seperately for $80 for box, and $150 for sub shipped. Used for less than a month.
http://www.eghatch.org/gallery/album...l_IMG_2957.JPG
http://www.eghatch.org/gallery/album...l_IMG_2958.JPG
http://www.eghatch.org/gallery/album...l_IMG_2965.JPG
http://www.eghatch.org/gallery/album...l_IMG_2969.JPG


OEM 95 eg hatch fuel pump. Has around 100k miles on it but very clean and works great. $30 shipped
http://www.eghatch.org/gallery/album...l_IMG_2976.JPG
http://www.eghatch.org/gallery/album...l_IMG_2977.JPG


OEM 92 civic si LCA's. 45k miles on them. Good shape, just need some cleaning. all bushings in great shape. $35 shipped
http://www.eghatch.org/gallery/album...l_IMG_2979.JPG


OEM 99 gsr brake lines. all 4 of them, with less than 30k on each. $25 shipped
http://www.eghatch.org/gallery/album...l_IMG_2980.JPG

Cheaper old school intake. Just a very short short ram one. Comes with a tired and worn out filter that might be reusable with some damn good cleaning, but I would switch it for K&N personally. $25 shipped for both.
http://www.eghatch.org/gallery/album...l_IMG_2981.JPG

OEM eg clock. USDM. $10 shipped
http://www.eghatch.org/gallery/album...l_IMG_2982.JPG

OEM da shift knob. Good condition for you old school bishes. $10 shipped
http://www.eghatch.org/gallery/album...l_IMG_2983.JPG

OEM EG sunroof deflector. discontinuted. Some very minor sun damage from over the years on the rubber. comes with mounting hardware. Decent condition with minor plastic scratches, could easily be cleaned up really good. OEM Honda and Honda written across the middle (can see it when you look up from inside)
$45 shipped <---new price
http://www.eghatch.org/gallery/album...l_IMG_2744.JPG


OEM EG shift boot, very good shape and not peeling at all. only 45k miles of use on this thing
$15 shipped
http://www.eghatch.org/gallery/album...l_IMG_2743.JPG

D series rear engine/tranny mount.
$25 shipped
http://www.eghatch.org/gallery/album...l_IMG_2605.JPG

Kteller.com 2.5" stainless full header back system for 92-95 hatch. Stainless steel(piping won't rust). Some scratches from the wreck, but overall good condition. Scratches not visable when installed. Has Magnaflow muffler. Flanged at axle. Many many new pics available. PM for them.
$225 shipped FIRM. NEED TO SELL TO GET MY EXHAUST FOR MY NEW HATCH. make offers. Local preferred. Local pickup for $150
http://www.eghatch.org/gallery/album...l_IMG_2613.JPG
TONS more pics here http://www.eghatch.org/gallery/thumb...album=3&page=2


Eg overflow bottle.
$15 shipped
http://www.eghatch.org/gallery/album...l_IMG_2590.JPG


OEM eg shift knob
$10 shipped
http://www.eghatch.org/gallery/album...l_IMG_2591.JPG


Eg interior light
$10 shipped
http://www.eghatch.org/gallery/album...l_IMG_2581.JPG


Eg engine fuse box
$15 shipped
http://www.eghatch.org/gallery/album...l_IMG_2579.JPG


Rear hatch glass with wiper/motor
$30 picked up. Comes with wiper motor assembly. In very good shape. Has somewhat older tint. I will ship but shipping is gonna be around $60 for this thing not to mention packing materials so shipped price is $100.

Red rear spoiler, OEM with led light. Good condition.
$40 shipped, or $25 picked up


Thats pretty much everything. I prefer paypal. PM me if you need help or any questions. I'm located in Logan Utah, not Cedar City. Willing to meet SLC peeps in Ogden for larger items such as swap.

Thanks for looking.

b16aswap- SOLD
rightside eg headlight SOLD
Complete black interior SOLD
Ls wheels SOLD
Doors SOLD
EG gauge cluster 112k SOLD
ek duel pod clust bezel SOLD
eg front hubs SOLD
amber corners SOLD
fenders SOLD
ITR throttle calbe SOLD
wiper switch assembly SOLD
Eg hatch rear lever and plate SOLD
EG gauge bezel with vents SOLD
Eg interior fuse box SOLD
OEM b16 power steering mount SOLD
D16z6 throttle body SOLD

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I vouch for this guy, bought a t25 off him in damn fine condition, with some other goodies. Also, that is an assload of stuff. later,

- short-A

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

can you get some good pics of the rear brake calipers.. thats all i need. just the rear calipers. ?? :D

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

i want the center console with the shift boot just the front piece with the cup holders i also want the stock shift nob i will give you 30 shiped?

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

lol people don't read.


Sorry but I don't have any rear calipers, only the fronts. I do have rear rotors and brake lines, but thats it.


As for the center console, I will sell it seperately later if I don't get someone to purchase the interior as a whole. I'm gonna hold out for a week or so to try to find a local seller for the entire interior (as stated in orignal post)

Still want the shift knob?

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

yea wiat till you no for sure if your gann sell the whole interior? i also need the dust boot if you have that too.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Yea I'm waiting. What dust boot are you looking to get? You mean the shift boot?

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

will that throttle body work on my D16A6, if so Ill take it. Also interested in those injectors. So it takes no modification at all to fit them. Also are they peak and hold. If so Ill probably take those also.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

um im not sure i just did a auto to manual conversion and i need everything thats there.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

yes the injectors are peak and hold and fit directly into honda intake manifolds without any seal modifications or anything like that.

The throttle body will bolt up to your d16a6 manifold just fine. I'm not sure about the older ecus using the same type of map sensor however, but if you are obd1 or obd2 it will work for you for sure

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

hmmm Im OBD0, So those injectors will fit in the D16A6's rail.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

yea those injectors will work fine for your car. The throttle body might not work the same.. because you have the map sensor on your firewall, but if the plug is the same 3 wire plug then it'd work just fine.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Interested in the JRC 5" FMIC. Please send me more pictures of it on all sides.

Thanks

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

intercooler is now sold, sorry guys

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Look at me pretty new FMIC!!! ;D

http://parkinginlots.com/albums/forsale/jrc5inch.jpg

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

>:( :'( :-X

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

damn man didn't have to rub it in his face.. ---- :P

GSR calipers now sold also, everything else is available, but the whole black interior peices are still pending to a local nukka

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Damn, throw the passenger door and fender in a box and send it my way. :D Damn it..........
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

lol pay for shipping and I can send them out, no door panel however. If you are really interested I can check on it

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Yes sir. I'll pay the shipping as long as it's reasonable. I don't know what they would charge to ship something that size. Let me know if you get an estimate.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

goto www.shipgreyhound.com. I've shipped doors from PA to CA before and its been around $60 which isn't bad at all. The buyer will have to pick it up at the closest terminal though.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

hey thanks for the idea, I never thought of that. assuming the door weighs less than 100 they can do it. What is you addy so I can see

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

The door should be around 60-70lbs. when packed. I've never had a door that weighed more than that.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I'm almost 95% sure that the spindles are the same. The del sol is pretty much just a civic with a different body honestly. let me know your address so I can check on shipping

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

OK I may be interested in the B16 swap.
you said it has everything yo need plus some.
I am local, (in slc and willing to drive) and looks like I may end up with the funds to make this work.

Any more info you can give me on this?
I havent decided yet but would like more info.
Thanks
MSN is the best way to contact me other then email.
MSN: B00M3Rho@hotmail.com
Email: Thayne.christiansen@xo.com

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I want those corners, but did you have to "rig" them to work or are they going to be ok?
It's not a big deal to pick up some new ones, I'm just wondering how broken they are to fit.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I just got my FMIC from bambbrose and I vouch for him. I got EXACTLY what I paid for. Honest guy and shipps FAST! Thanks bro!

Nick

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

My zip is 86406 in AZ

Can't you ship it FedEx? I thought they shipped ---- like that?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I was saying greyhound cause it would save you a lot of money Boost.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

edited the first post and took out everything that is now sold. I'm gonna check on shipping for the doors tomorrow. I went to fedex and they said they can ship up to 150lbs and like 6 feet long or something so they will do it, I just gotta figure out a price.

As for greyhound I just found out they don't have a route near my town anymore, must have not been busy enough

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Yeah, they probably don't have a route here either so I would have to drive like 250 miles to get it.

I just need the passenger door and the passenger fender. If the shipping is too high for the door I'll just take the fender. Let me know.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

Bump for rest of his stuff.
I'm taking the B16 ;D

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

you still have those injectors? They low or high impetence and what plugs do you need for them (mostly I just want to know if I can just plug them into my obd2 car)

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

They're saturated injectors. If they were P/H they would be in my car right now! :'(

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

those injectors will work in all obd1 and obd2 vehicles.. I can include those obd1 clips so they clip right up also

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I just might want those injectors...

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

how much for just the axle back section of the exhaust. shipped to 97140? very interested.

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

I want the throttle cable, i have the money waiting. I can do a money order. PM me with your addy..

Thanks
Mike

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

yep, i'll take those injectors
I can send money via paypal
PM me also with your e-mail adress

Re:bambbrose Tons of shit for sale SHITLOAD of pics, eg, b16, everything
 

still got the obd1 injector clips? if so, let me kno