B16a2/RC 550/AVCR/HONDATA/FMIC/IC PIPING/AEBS INTAKE!!! UPDATED PRICE & TURBO
04-18-2006, 12:24 AM
#1
0.0 BAR
Thread Starter
Join Date: Jan 2005
Posts: 42
B16a2/RC 550/AVCR/HONDATA/FMIC/IC PIPING/AEBS INTAKE!!! UPDATED PRICE & TURBO
ROTA SLIPS B16 B20 BLOCK HONDATA FMIC IC PIPING BOV AVCR
Ok boys and girls, EVERYTHING must go! Its time to start the summer season with some purchases I have been thinking about so make some of your own!
Please contact me via PM or AIM ME OR EMAIL (John@tuningfactoryinc.com)! Those are the best ways to get a hold of me…
Everything *should* have prices, unless noted all prices are flexible...
I like driving so I’ll pretty much meet anyone anywhere 1/2 way if you’re close…
SHIPPING: I will ship to anywhere, my rates go as follows, 5 dollars in Michigan or Illinois.10 dollars for any Midwest zip code. 15 Dollars for any east coast zip code, and 20 dollars for any west coast zip code. This includes packaging from UPS or FEDEX and $500.00 insurance coverage from the selected shipper.
PAYMENT: I prefer paypal or cash, I am verified, and have had 30+ transactions.*** IF YOU PAY ME WITH PAYPAL I REQUIRE 3% ADDED ON TO TOTAL!!!!!*** If you choose to send another form of payment, it must be able to be cashed at ANY BANK and your product will not be shipped until the money has cleared (if check)…
Car Parts
* 16x7 4x100 ROTA SLIP STREAMS FLAT BLACK *
Four (4) Rota slip streams in black good condition, I just bought hancook h2s for the front tires last summer, and maybe have a few thousand miles on them, the rears are toyo proxie fz4s… they are 4x100 bolt pattern and 40 offset… $550.00
*JDM B16 SIRII SHORTBLOCK 40K MILES COMPLETE
B16 Short block ordered from HMO (Homotorsonline.com) a little over a year ago. It was shipped with less than 30k miles and I at best might have put 10k miles on it, A compression test was done before the head was taken off and it was 200PSI across the board. The pistons are JDM and 10.4:1 compression, it comes with everything Comes with everything from the oil pan to the top of the deck. ( crank pistons, rods, bearings, ect. ) except the harness and alternator. $550
*GARRETT INTERCOOLER 33x8x3.5*
33x8x3.5 bar and plate intercooler, with a garret core and phoenix turbo end tanks, all tig welded, with 2.75” outlets, good for up to 450whp. $350.00
*HONDATA S200B LOADED WITH P28 ECU*
Hondata s200b engine management system comes with all features enabled except G-monitor and ROMEDITOR, the P28 is from a Del Sol si, and was socketed by Tuning Factory in Michigan.$550.00 .
*APEXI AVCR*
Apexi AVCR, bought last summer for $400.00, works REALLY good, the boost by gear feature is the ----! The face has no scratches on it, and the harness to the ECU is uncut. The boost solenoid and map sensor are in perfect condition with no problems, I will include vacuum lines along with everything else. $325.00
* INTERCOOLER PIPING WITH GREDDY TYPE S BOV*
The intercooler piping is for any EF/EG/EK car, its make out of stainless steel piping and painted flat black, the hot side is 2.25" and the cold side is 2.75". All couplings are black silicone and have withstood 20+ PSI of boost with worm clamps. All of the pipe ends are rolled to ensure no blown pipes. The BOV is a genuine Greddy type-s blow off valve. It was used for about 2 years it, works perfectly and still looks great. It has a couple small scratches, but nothing major, and nothing that would decrease performance what so ever. $375.00
*JDM B16 SIR-II Intake Manifold*
Damn good condition, JDM B16 SIRII intake manifold. Does not have ANY sensors on it or a Throttle body. Just intake manifold and the Stock fuel rail. $75.00
*Rare 92-95 MINT COND. Gauge Bezel*
BLACK gauge bezels out of a 93 SI, few scratches, nothing major. Perfect for de-ricing your car $50
*92-95 Red Passenger side door with Glass*
Passenger side door with glass, the glass is in good condition, no scratches, or cracks, the door is a manual and has all of the guts still in it. The bottom on the door has a ripple in it from an accident, besides that it’s in good condition. You might be able to repair the ripple or just use the glass and or guts. $75.00 I will not ship this item.
XXX Pictures soon XXX
*D16Z6 Air box*
Stock d16z6 AIRBOX!!! with 5k new OEM filter $35.00
*EG SI front suspension*
Front suspension out of a 93 SI, $50.00
*EG Tail Lights W/ Harness*
Stock EG tail lights with harness for coupe and sedan only $50
*EJ 4 door rear sway bar*
Four-door rear sway bar, maybe 19mm not sure haven’t measured it. I don’t have any hardware for it, just the sway bar. $40.00
XXX Pictures Coming Soon XXX
Electronics
*Nextel Blackberry 7520*
*PENDING*
Nextel blackberry 7520-cell phone. Links up to any e-mail and pushes it to the phone. Great phone, no scratches, crazy good battery life. I have everything pictured. $100.00
Ok boys and girls, EVERYTHING must go! Its time to start the summer season with some purchases I have been thinking about so make some of your own!
Please contact me via PM or AIM ME OR EMAIL (John@tuningfactoryinc.com)! Those are the best ways to get a hold of me…
Everything *should* have prices, unless noted all prices are flexible...
I like driving so I’ll pretty much meet anyone anywhere 1/2 way if you’re close…
SHIPPING: I will ship to anywhere, my rates go as follows, 5 dollars in Michigan or Illinois.10 dollars for any Midwest zip code. 15 Dollars for any east coast zip code, and 20 dollars for any west coast zip code. This includes packaging from UPS or FEDEX and $500.00 insurance coverage from the selected shipper.
PAYMENT: I prefer paypal or cash, I am verified, and have had 30+ transactions.*** IF YOU PAY ME WITH PAYPAL I REQUIRE 3% ADDED ON TO TOTAL!!!!!*** If you choose to send another form of payment, it must be able to be cashed at ANY BANK and your product will not be shipped until the money has cleared (if check)…
Car Parts
* 16x7 4x100 ROTA SLIP STREAMS FLAT BLACK *
Four (4) Rota slip streams in black good condition, I just bought hancook h2s for the front tires last summer, and maybe have a few thousand miles on them, the rears are toyo proxie fz4s… they are 4x100 bolt pattern and 40 offset… $550.00
*JDM B16 SIRII SHORTBLOCK 40K MILES COMPLETE
B16 Short block ordered from HMO (Homotorsonline.com) a little over a year ago. It was shipped with less than 30k miles and I at best might have put 10k miles on it, A compression test was done before the head was taken off and it was 200PSI across the board. The pistons are JDM and 10.4:1 compression, it comes with everything Comes with everything from the oil pan to the top of the deck. ( crank pistons, rods, bearings, ect. ) except the harness and alternator. $550
*GARRETT INTERCOOLER 33x8x3.5*
33x8x3.5 bar and plate intercooler, with a garret core and phoenix turbo end tanks, all tig welded, with 2.75” outlets, good for up to 450whp. $350.00
*HONDATA S200B LOADED WITH P28 ECU*
Hondata s200b engine management system comes with all features enabled except G-monitor and ROMEDITOR, the P28 is from a Del Sol si, and was socketed by Tuning Factory in Michigan.$550.00 .
*APEXI AVCR*
Apexi AVCR, bought last summer for $400.00, works REALLY good, the boost by gear feature is the ----! The face has no scratches on it, and the harness to the ECU is uncut. The boost solenoid and map sensor are in perfect condition with no problems, I will include vacuum lines along with everything else. $325.00
* INTERCOOLER PIPING WITH GREDDY TYPE S BOV*
The intercooler piping is for any EF/EG/EK car, its make out of stainless steel piping and painted flat black, the hot side is 2.25" and the cold side is 2.75". All couplings are black silicone and have withstood 20+ PSI of boost with worm clamps. All of the pipe ends are rolled to ensure no blown pipes. The BOV is a genuine Greddy type-s blow off valve. It was used for about 2 years it, works perfectly and still looks great. It has a couple small scratches, but nothing major, and nothing that would decrease performance what so ever. $375.00
*JDM B16 SIR-II Intake Manifold*
Damn good condition, JDM B16 SIRII intake manifold. Does not have ANY sensors on it or a Throttle body. Just intake manifold and the Stock fuel rail. $75.00
*Rare 92-95 MINT COND. Gauge Bezel*
BLACK gauge bezels out of a 93 SI, few scratches, nothing major. Perfect for de-ricing your car $50
*92-95 Red Passenger side door with Glass*
Passenger side door with glass, the glass is in good condition, no scratches, or cracks, the door is a manual and has all of the guts still in it. The bottom on the door has a ripple in it from an accident, besides that it’s in good condition. You might be able to repair the ripple or just use the glass and or guts. $75.00 I will not ship this item.
XXX Pictures soon XXX
*D16Z6 Air box*
Stock d16z6 AIRBOX!!! with 5k new OEM filter $35.00
*EG SI front suspension*
Front suspension out of a 93 SI, $50.00
*EG Tail Lights W/ Harness*
Stock EG tail lights with harness for coupe and sedan only $50
*EJ 4 door rear sway bar*
Four-door rear sway bar, maybe 19mm not sure haven’t measured it. I don’t have any hardware for it, just the sway bar. $40.00
XXX Pictures Coming Soon XXX
Electronics
*Nextel Blackberry 7520*
*PENDING*
Nextel blackberry 7520-cell phone. Links up to any e-mail and pushes it to the phone. Great phone, no scratches, crazy good battery life. I have everything pictured. $100.00
04-18-2006, 11:26 PM
#6
0.0 BAR
Thread Starter
Join Date: Jan 2005
Posts: 42
Re: *HONDA* 550s/BOV/Turbo/Oil lines/manifold ALOT OF STUFF!!!
Originally Posted by Boosted_StinkyNuts
$55 for the turbo since I need to rebuild and get the exh. housing. 
PM me your zip so i can calulate shipping...
everything can be payed for via paypal + 3%, i am verifyed with 20+ transactions
these parts are just collecting dust so i am very flexible on pricing...
i will trade the type s for a tial though...
the RCs are peak and hold, they do require a resistor box!
04-19-2006, 06:31 PM
#8
0.0 BAR
Thread Starter
Join Date: Jan 2005
Posts: 42
Re: *HONDA* 550s/BOV/Turbo/Oil lines/manifold ALOT OF STUFF!!!
yes i can do 185 shipped for the type s, please add 3% to 185.00 and PM me for my paypal address THANKS!
you anyone has any questions PLEASE AIM ME OR PM ME!!!
kthanxbye
you anyone has any questions PLEASE AIM ME OR PM ME!!!
kthanxbye
