HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Turbo Parts For Sale (https://www.homemadeturbo.com/turbo-parts-sale-9/)
-   -   B Series Turbo stuff & MISC (https://www.homemadeturbo.com/turbo-parts-sale-9/b-series-turbo-stuff-misc-87651/)

boosthappyef 01-04-2008 03:22 PM

B Series Turbo stuff & MISC
 
1 Attachment(s)
I know I'm a noob, but I've been on here awhile reading around and I have verified paypal. All prices are OBO, so if you don't like the prices (I'm sure someone will disagree), give me a reasonable offer. Located in Washington 98801. Prices listed are not with shipping. As far as shipping, if it fits in a flat rate box, that's what it'll cost, the bigger stuff, will depend on weight and location. I'm in the process of building a fully built LS/Vtec Turbo set up, and it's raping my bank account, so I'm just trying to fund the project. I have a list of stuff in the wanted section that I would be willing to trade this stuff for and cash on my end.


B series t3 flange Cast manifold $85
XS Power 38mm wastegate w/7lb spring $30 SOLD
Ching Chang t3/t4 To4E turbo, very little shaft play with oil restrictor and steel braided feed line $150
3" mandrel down pipe with 3" flex pipe, heat wrapped, 5 bolt t3 flange, o2 bung, flange for dump tube, and flanges $80 SOLD
DSM 450's $65 SOLD
(4) Resistor Boxes with plugs $15 each
Motorola 2.5 bar map sensor with pig tails $25 SOLD
B18B1 Complete head, with valve cover, no dizzy $100
B18A1 Complete head with valve cover, no dizzy, $70
B18A1 Bare Block with main caps. Good block, was gonna use for a spare $75
(2) OBD1 alternators $50 each
OBD0 alternator $40
(6) 4 wire o2 sensors $23
(3) Tps sensors $20
(4) OBD1 map sensors $15
GSR oil Pump $50
B series tapped oil pan $40
SI Wheels got some curb rash, but still look good. 2 center caps are drilled for extended wheel lugs $100SOLD
EG half size radiator w/fan (came out of a dx) $35


Like stated above. .ALL PRICES ARE OBO. . . I have pics of a lot of this stuff, so pm me if you want a picture of something specific.


Here a picture of the turbo, manifold, wastegate, and downpipe setup

Attachment 21212








93z6t 01-04-2008 04:01 PM

Re: B Series Turbo stuff & MISC
 
i want the dsm injectors get me a paypal addy

marcj 01-04-2008 04:34 PM

Re: B Series Turbo stuff & MISC
 
pm'd

4drcivicb18a 01-04-2008 08:28 PM

Re: B Series Turbo stuff & MISC
 
I want the 2.5 bar map sensor. Shipped to 19115... Any pics

ososlohatch 01-04-2008 08:28 PM

Re: B Series Turbo stuff & MISC
 
trades?

D15Bastard 01-04-2008 08:32 PM

Re: B Series Turbo stuff & MISC
 
pics of the wheels. are you talking about just 2 or all 4?

boosthappyef 01-06-2008 03:18 PM

Re: B Series Turbo stuff & MISC
 
1 Attachment(s)

Originally Posted by philly sleeper
I want the 2.5 bar map sensor. Shipped to 19115... Any pics

Attachment 21144

boosthappyef 01-06-2008 03:19 PM

Re: B Series Turbo stuff & MISC
 
1 Attachment(s)

Originally Posted by D15Bastard
pics of the wheels. are you talking about just 2 or all 4?


Attachment 21143

boosthappyef 01-06-2008 03:20 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by ososlohatch
trades?

What do you have?

marcj 01-06-2008 05:00 PM

Re: B Series Turbo stuff & MISC
 
what the hell man? I've already messaged you twice about parts and no response.

93z6t 01-06-2008 08:19 PM

Re: B Series Turbo stuff & MISC
 
dude i never got a message from you just post your paypal addy and ill end ya the money

marcj 01-06-2008 10:02 PM

Re: B Series Turbo stuff & MISC
 
i wouldn't send this guy money until he starts responding like a normal person and provides some vouches :S

Ichi-Go 01-06-2008 11:44 PM

Re: B Series Turbo stuff & MISC
 
Ill take the wastegate if you have the firering. Let me know so I can paypal you some moolah.

93z6t 01-07-2008 12:16 AM

Re: B Series Turbo stuff & MISC
 

Originally Posted by marcj
i wouldn't send this guy money until he starts responding like a normal person and provides some vouches :S

word man ill probley hold off..

seerex 01-07-2008 01:37 AM

Re: B Series Turbo stuff & MISC
 
You can buy the cdm turbo new for 150, and your has shaft play :-\.

QikEnuF 01-07-2008 02:49 PM

Re: B Series Turbo stuff & MISC
 
All journal bearing snails have shaft play, no?

boosthappyef 01-08-2008 01:52 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by marcj
what the hell man? I've already messaged you twice about parts and no response.

pm'd you.

boosthappyef 01-08-2008 02:02 PM

Re: B Series Turbo stuff & MISC
 
Sorry guys. Been out of town for a few days with limited access to a computer. I'm not trying to give anyone the run around. All pm's replied to.

boosthappyef 01-08-2008 02:14 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by crxvtec91
You can buy the cdm turbo new for 150, and your has shaft play :-\.

This is what I paid for it:
http://cgi.ebay.com/ebaymotors/t3-t4...QQcmdZViewItem

So that's why I ask $150. You're right, that might be a little high on the price, but I've been reading around on here long enough to know how it works around here. Hope high and take low. Every one on here does it. And that's also why I said "Everything is OBO" ... 2 times... in my post. :y

nicko360 01-08-2008 02:38 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by marcj
i wouldn't send this guy money until he starts responding like a normal person and provides some vouches :S


i can vouch ------

cbirchmore 01-08-2008 02:46 PM

Re: B Series Turbo stuff & MISC
 
$40 shipped on the $70 b18 head! :y ;D O0 :8

boosthappyef 01-08-2008 02:59 PM

Re: B Series Turbo stuff & MISC
 
$30 and you pay shipping.. :6

cbirchmore 01-08-2008 03:19 PM

Re: B Series Turbo stuff & MISC
 
Get me a shipping quote to 29108.

nicko360 01-08-2008 03:29 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by cbirchmore
$40 shipped on the $70 b18 head! :y ;D O0 :8


b series heads usually cost $40 to ship ::)

cbirchmore 01-08-2008 03:44 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by boosthappyef
You're right, that might be a little high on the price, but I've been reading around on here long enough to know how it works around here. Hope high and take low. Every one on here does it.


Originally Posted by nicko360

b series heads usually cost $40 to ship ::)

Did u get ure ----? I know how much it be. But read his post!!! He knows to aim high, and take it low! So.. that means, asking $ 70 plus S&H, = $40 shipped..

hondaunlimited 01-08-2008 05:34 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by nicko360

i can vouch african american

get me the wastegate, turbo and DP for hella cheapz, bro. i get paid the 15th, so get them for me before they sell, ill get you a little somethin somethin, too

oh, and im gonna need the obd-0 b18 head too

johntsi 01-08-2008 06:26 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by boosthappyef
Sorry guys. Been out of town for a few days with limited access to a computer. I'm not trying to give anyone the run around. All pm's replied to.

i didnt get a reply u lying sand nikka

boosthappyef 01-08-2008 06:49 PM

Re: B Series Turbo stuff & MISC
 
check your pm's.

93z6t 01-08-2008 07:08 PM

Re: B Series Turbo stuff & MISC
 
hey man money sent ..

boosthappyef 01-09-2008 02:10 PM

Re: B Series Turbo stuff & MISC
 
I'm willing to do some trading and cash on my end or straight cash for the following ----...

B series top mount turbo manifold (for ef)
Garrett GT35R or comparable turbo
1000cc Injectors
Wide Band o2 sensor and Gauge
Full Race Half size radiator
Performer X or skunk2 intake manifold for GSR
LSD For B17 GSR Tranny
Fuel Pump
Traction Bars for ef

cbirchmore 01-09-2008 02:36 PM

Re: B Series Turbo stuff & MISC
 
what kinda fuel pump?

OneQuickCivic 01-09-2008 10:17 PM

Re: B Series Turbo stuff & MISC
 
let me know if you still have the turbo and manifold? +shipping to 03222

boosthappyef 01-09-2008 10:43 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by cbirchmore
what kinda fuel pump?

I'm planning on 450+ out of this next build, so I need something that will support that.

boosthappyef 01-09-2008 10:49 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by OneQuickCivic
let me know if you still have the turbo and manifold? +shipping to 03222

pm'd

OneQuickCivic 01-09-2008 11:25 PM

Re: B Series Turbo stuff & MISC
 
also does the wastegate flange come with the deal? turbo-oil line/manifold-and the flange.. if so ill take it fri !

98IntegraGSRguy 01-12-2008 11:50 AM

Re: B Series Turbo stuff & MISC
 
got pics of the dump tube?

boosthappyef 01-12-2008 03:56 PM

Re: B Series Turbo stuff & MISC
 

Originally Posted by 98IntegraGSRguy
got pics of the dump tube?

look at the picture on the top. Goes from the waste gate to the down pipe.

marcj 01-12-2008 03:59 PM

Re: B Series Turbo stuff & MISC
 
is the oil pan tapped for -8 AN fittings or the barbed hose ----?

salesmonkey 01-12-2008 06:21 PM

Re: B Series Turbo stuff & MISC
 
if you dont sell that manifold and wastegate sometime soon i wouldnt mind going over and picking that ---- up. im about a hour and so away. oh and a b18 head if you still have it.

93z6t 01-22-2008 11:13 PM

Re: B Series Turbo stuff & MISC
 
here we go agine i payed this guy 3 weeks ago for the dsm injectors and the money has cleared and still nothing i have already filed a paypal claim but i want my shot dont want to have to ---- with finding another set..


All times are GMT -5. The time now is 02:22 PM.


© 2024 MH Sub I, LLC dba Internet Brands