96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

just like it says, i have an adjustable cartech fmu (75), and an smc500 (50)...the voltage limiter doesnt work to the best of my knowledge (the afc doesnt have one anyway).

I also have an Arizona Twin Trac unit (like a phantom grip) for d-series with about 3500 miles on it(150), and a ford t3 o2 housing/flapper assembly(20). All prices are without shipping, im in NJ

*96 hatch shell with approx 170k on body, 5spd, no ac, no motor (has my built y7 in it now if you want that too look below) ghetto-lowered, ex cluster with tach, short shifter, 255 intank pump, bfg drags up front on 15s, kumhos on 17s in back. comes with stock wheels with nearly new tires. body is in good shape, so is interior 2500

also up for grabs is my built y7. it now has about 4400 miles on it(bottom end was bought as a stock shortblock with zero miles,top end has about 170k). it has je/srp 9:1pistons, je rings, crower billet rods (not the econos), arp headstuds, endyn block posts....last try on here for 1200, then it goes on ebay. motor can be had with an act lightened flywheel and 6 puck (same mileage) for a little more $$$

Re:fmu, smc500
 

offers/trades?

Re:fmu, smc500
 

How long did you use the SMC? do you still have the install instructions?

Re:fmu, smc500
 

used it for about a year, yes i still have the instructions

Re:fmu, smc500
 

i might pick up that fmu. do you know how far it adjusts? ie 8:1-12:1

Re:fmu, smc500
 

sorry i dont...all i know is that its the single adjustable one (doesnt adjust base pressure)

Re:fmu, smc500
 

bump

Re:fmu, smc500
 

you have the fmu cause i want it ill pay through paypal or m.o ?

Re:fmu, smc500
 

yes i still have it as of now. if you want it send paypal to redline300z@aol after you give me your zip code so i can figure out shipping

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

bump for more stuff for sale

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

according to the az race site the twin track for civics and crxs fits the b16 (del sol) and the integra LS (if it is the H2)

does it still look shiny? do you still have instuctions for it? zip is 88011 and shipping cant be too much, it's tiny.

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

it looks nearly new, where it touches the gears you can tell it was used but its not even really worn at all. i dont think i have the instructions, but its pretty self-explanatory (i could walk you through it easily). The only thing is that i cant find the stupid little pins that hold it compressed while you put it in. if you want i could rig something up or you could use a clamp i bet. toss in 5 bucks for shipping ;)

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

what do you have in mind for replacing those pins? I'm a big fan of coat hangers, but I haven't seen where the pins go so I don't know if they would work. do yout think a c-clamp could fit in there?

I'm out of town right now, when I get back home I'm going to try to get paypal set up, I'll let you know how that goes.

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

i was just gonna make a plate and stick two little bolts in there on each side to keep it compressed. im thinking a really small c-clamp might work. let me know if you want it, its just sitting in my shop

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

I want it, like I said I'll get on that paypal when I get back home. I will send payment by friday for sure whether it's paypal or MO. let me know how that custom compressor fabrication goes, I'm really cheap and I don't want to be buying a c-clamp if I don't have to, I might just make a friend hold it together while I put it in.

Re:*new stuff added* fmu, smc500, twin-trac lsd, ford t3 o2 housing
 

smc and twin trac are pending :)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

::)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

i will give you 50 for the fmu

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

60 plus shipping

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

gimme till wensday morning and you got a deal i can send it through pay pal .

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

alright, just pm me your address so i can figure out shipping first

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

can you please send pics of the hatch ;D

rsxprincess@seattlersx.com

Thank you!!!
Leia :)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

are u going to be selling the ex cluster?

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

I don't need your stupid twin-trac!

I got a quaife... 8)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

princess: pretty much all the pics i have are in the links in my sig, i could take more if you want

renr: nope

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

thanks for the fast response but I didn't realize you were that far away. I browsed the post and saw arizona, should have read the whole thing.

BUMP for a clean EK and a smokin deal 8)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

what do yooz want for the engine?

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

Hey Jay, I got second dibs on the twin-trac if Kyle doesn't get it. I got $165 with your name on it sitting here waiting to find its way to your door. Hurry up Kyle!

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

taking any trades on the motor? all i got is turbo stuff....

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

that would have to be a hell of a lot of turbo stuff. ill pass unless you got something spectacular

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

lol alright

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

I'm waiting on speedy jay. he hasn't gotten back to me on whether this is the h2 unit or not. where you at gt?

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

i didnt get a chance to go home...whatever one they sell on the website for d-series is the one it is...ill look on the site in a sec

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

Is the shell still for sale? Where are you located? Can you post more pics of the shell I might be interested.

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

sure its for sale...im in jersey, and pretty much all the pics i have are in my sig ;)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

Is the car still in the same shape thats its in in your sig? Has it ever been in any accidents? Is the title clean? What all does the shell come with besides the obvious? Is the wiring harness butchered up? What do you mean by "ghetto lowered?"


hmmmm I'm interested but I don't want to get your hopes up yet cause I still gotta look at my funds and find a motor. You wanna trade for a twin turbo 90' Civic? ;)

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

car is in the same shape minus me scratching the windsheild a little with a shitty snow scraper. never any accidents, clean title (im the second owner). shell comes with the rims, short shifter, the original gauge cluster, and stock steelies with nearly new tires (need to be balanced though, the weights came off at the track) the wiring harness is slightly butchered if you want to call it that (its wired up for an smc), and ghetto lowered= cut front springs, and coilover springs in the rear with stock struts that probably need replacing.

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

so I guess if you have a 88-99 civic, and I have a 86-99 integra non gsr tranny then we can be friends.

Re:96 cx hatch, BUILT D16,fmu,smc500, twin-trac lsd, ford t3 o2 housing
 

;D