95 Civic 4dr sedan PART OUT/Aftermarket
 

***more pics added*** Kevin Bomers

Hey guys on Tuesday night at about 2:50am coming home from my girlfriends house i fell asleep and hit the wall on the highway. Car is NOT fixable so I'm parting it out as soon as i can my dad doesn't want it in his driveway for long. Here are pics of the car let me know what you would like and i will take it off and ship it or you can meet me and pick it up. I'm located in Grand Rapids, Mi 49525
http://kevinbomers.sentimentalstitch...ut%20001-1.jpg
http://kevinbomers.sentimentalstitch...ut%20002-1.jpg
http://kevinbomers.sentimentalstitch...ut%20004-1.jpg
http://kevinbomers.sentimentalstitch...ut%20006-1.jpg
http://kevinbomers.sentimentalstitch...ut%20007-1.jpg
http://kevinbomers.sentimentalstitch...ut%20008-1.jpg


Also have some after market parts available as well here is small list

-92-95 civic/94-00 integra tokico 5 way adjustable struts 2k on them
-Suspension Techniques Complete rear sway bar 19mm for 92-00 civic/94-00 integra
-Drop zone front coil overs 450 spring rate used
-ractive rear coilovers with helper springs used
-nuespeed Sprot springs for 92-00 civic or 94-00 integra 1.7 or 1.8 drop
-75.5mm vitara pistons/rings/wristpins/clips
-China i beam D16 rods with arp bolts brand new in the box
-Full acl/king main/rod bearing set for d16 W/trust washers
-Full Gasket set COMPLETE valve seats and all
-(2) FMIC Vertical Flow
-Apexi D series turbo kit BRAND NEW W/Instructions RARE RARE dont even make these
-Apexi Twin camber BOV used with flange and pipe
-DSM 450cc injectors W/injector resister box
-ARP head studs used once for d16y
-D16 Exedy stage 1 clutch used for 2k if that
-D16 Centerforce clutch used but has some life left
-D16y7 96 with 158,000
-Delta 272 cam for d16y7
-civic/integar battery x2
-del sol seats with gray strip
-y8 tranny
-power steering rack w/tie rods for 92-95 civic bought from shop but wrecked car still in bubble wrap
-complete z6 intake manifold
-gsr throttle body
-hf manifold




Let me know what parts you would like pics of and i will try my best to get them up as soon as i can.

Thanks for your time Kevin

Post prices

-92-95 civic/94-00 integra tokico 5 way adjustable struts 2k on them 175.00

-Suspension Techniques Complete rear sway bar 19mm for 92-00 civic/94-00 integra 65.00

-Drop zone front coil overs 450 spring rate used 15.00

-ractive rear coilovers with helper springs used 10.00

-nuespeed Sprot springs for 92-00 civic or 94-00 integra 1.7 or 1.8 drop 50.00

-75.5mm vitara pistons/rings/wristpins/clips 120.00

-China i beam D16 rods with arp bolts brand new in the box 175.00

-Full acl/king main/rod bearing set for d16 W/trust washers 40.00

-Full Gasket set COMPLETE valve seats and all 40.00

-(2) FMIC Vertical Flow 65.00 for the new one 50.00 for used one

-Apexi D series turbo kit BRAND NEW W/Instructions RARE RARE dont even make these 990.00

-Apexi Twin camber BOV used with flange and pipe 45.00

-DSM 450cc injectors W/injector resister box 50.00

-ARP head studs used once for d16y 75.00

-D16 Exedy stage 1 clutch used for 2k if that 75.00

-D16 Centerforce clutch used but has some life left 30.00

-D16y7 96 with 158,000 200.00

-Delta 272 cam for d16y7 130.00 shipped

-civic/integar battery x2 40.00 each

-del sol seats with gray strip 100.00

-y8 tranny 65.00

-power steering rack w/tie rods for 92-95 civic bought from shop but wrecked car still in bubble
wrap 100.00

-complete z6 intake manifold 45.00

-gsr throttle body 30.00

-hf manifold 26.00

you might as well part out that turbo kit those things use a small ass turbo and dont mame a whole lot of power over stock. but i might be interested in the hf manifold and dsm injectors. hit me with a shipped price to 75503 for those two

yea right that apexi kit is the ---- its ball bearing, i had one of these on my del sol and made 230 200 on 10psi with 2.25 exhaust i have graph and video to prove it. i've seen 285 with 18psi on these. they used the same turbo on the b series kits just a diff manifold. So if its big enough for a B series then its big enough for my D

YouTube - Del Sol Dyno

Sorry to hear about this but am glad your ok. how much for the rods and pistons and what rating do the rods have and location thanks

pics of bov and how long is the pipe

pmed

Were the mirrors good? drivers side speaker cover. Horn button cover things. Outer steering wheel is clean not all ripped up? Does it have the center cardboard piece in the trunk? I really need alot of stuff off of it. Also was the condenser fan good? Compressor?

mirrors are good both power

horn button umm no air bag went off

out steering wheel si clean

no cardboard in trunk i can check to make sure though

condenser no compressor should be good still

exedy clutch come with a throwout bearing also? price shipped to pa 15084

clutch sold sorry

Sorry to hear about your car, but good to hear you are ok.
how much to ship the injectors and res box to M2H 1W6 Toronto Canada?
What type of payment are you accepting

paypal for payment and 77.00 shipped to your door

anybody??

pm me price on ecu shipped to 25405

interested in the power steering rack? If I paypal you Friday, how quick can you get it to me?

i can ship it same day you pay i have the rest of week off so its all ready wrapped up from when i got it so its ready to go

hey, let me know about the turbo kit, looking for something complete for a d-series, i mean FULLLLLYYYY complete.


either msg me or call me,


ctropaleatoire@hotmail.com

ill give u my # if u want to call instead.


thanks

hey man im looking to buy them chinda rods....hf mani...dsm 450s...an other msg me back let me kno shipping 15478

pmed

Price for struts shipped to 45322?

sorry struts sold

Hey man thanks for msgin me i was goin to see if i buy all this if you can do a package deal....Arp head studs...Dsm 450's...does all 4 tokico struts for 175?...china rods....hf mani...i was goin to see if you can do a package deal? let me kno i got cash in hand thanks...

struts are sold let me know what your interested in and i will get you a package price

offers?

you still got the BOV? im interested, but i cant PM

Hey man i still want ...them china i beams an 450s an others

i have the i beams,hf manifold and arp head studs. the injectors and struts have been sold.

how much for the arm rest. PM me

pmed

do you still have the 75.5mm vitara pistons/rings/wristpins/clips,Full acl/king main/rod bearing set for d16 W/trust washers 40.00? im assuming they are new still? im interested in them, let me kno!

yes i have all that stuff still

are they used or still new?

Does it have a P06 ECU? If so how much for it and the Dizzy plus the harness pig tails for both?

interested in the Y8 trans! Is it mint? or at least no grinds, popping out of gear, or ? Let me know. I can't PM so email me.

lwidner3315@live.com

they are new.
yes i have p06, and i do have dizzy.

lol think i can pm now!

lol can u send ur paypal info?

payment sent for pistons/bearings