1994 Honda Civic SiR
01-30-2007, 08:48 PM
#1
0.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 0
1994 Honda Civic SiR
Considering selling my baby.
Little low down of the car:
My car:
94 SiR
(everything in yellow = Spoon, cant see it very well)
Engine:
(I recieved the car with the built motor in it, I added a few things)
~B16A with the Toda stroker kit 1800cc
~[color=red]Toda A intake cam, B exhaust, Toda cam gears
~Toda valve springs, retainers
~ported head
~LSD tranny and I think it has a different final drive, not sure
~Newer exedy clutch OEM replacement pressure plate
~Feels lightweight flywheel
~Baffled oil pan
~OEM ITR intake/throttle body
~hondata gasket
~4-2-1header which I believe is a Spoon header, but it has a slight crack in it. No dings at all. Honest note, probably needs to be replaced soon.
~Spoon N1 axle back, aftermarket B pipe, unsure what it is, cat still there
~engine management CROME
Suspension & Brakes:
~Spoon rear upper and lower bars
~Spoonfront upper s. bar.
~OEM ITR front lower tie bar
~Spoon street struts
~H&R race springs
~ATS brake lines
~Apexi slotted rotors (front)
~Wed Sport pads in the front, OEM in the back(new)
~High temp fluid
~Cusco master cyl brace, needs to be powercoated/painted
~MUGEN RNR wheels with good tires, 65% tread.
Interior:
~Bride Brix II driver seat. Red, graditation material
~DC2 R pass seat, not currently installed but will include with the car. Its on order.
~steering wheel, dont ask. I have a black Nardi or MOMO that will go with it.
~CD player
~decent speakers
Other:
There are a few other things on it like the Spoon wing and PIAAheadlights lights, Mugen side skirts/front lip, safety 21 cage*. Currently the car has the rear seats and spare tire out, I still have these and they will be included with the car.
*the front part of the safety21 cage is not in yet, it will be put it in soon. The dash as to come out for the front part of the cage to be put in.
Condition/details:
The car was mint when i got it. Not a ding in it. Now its got a few car door dings in it. Stupid ***** have no respect for anyone's cars over here. There are some rust spots on it that need to be taken care of, and the roof needs to be re-painted. I don't show it, so its not cleaned up to be. It is a clean car, I love it, could use some new paint though. Runs super strong, though i've never done a compression test on it. (never felt the need to) Only thing wrong engine wise, it has a vac leak somewhere and I can't find it. Only thing wrong with it. (well that and the exhaust rattles) :P
Contact:
email: frankvest@gmail.com
AIM: imadumbassu2
Phone: I can call anyone.
Location: I am in the Marine Corps stationed in Okinawa, Japan.
Price/shipping:
Price is 14,000 OBO in my hand/paypal as it sits $12,000 with a stock B16 or GSR in it OBO I will include a 3 day/long weekend trip to Okinawa from So-Cal, meals and a motel say provided. I will pick you up at the airport, drive you around for the weekend etc. etc.
Shipping
There are several ways to ship it. There is a company here that will ship and legalize your vehicle for $10,000 with a florida plate and about a 8 week turn around time from the time it leaves Okinawa. That would be your best bet, and what I would recommend. Whatever you decide to do is on you. I can help you out though. :thumbup:
Pics will be up shortly
Little low down of the car:
My car:
94 SiR
(everything in yellow = Spoon, cant see it very well)
Engine:
(I recieved the car with the built motor in it, I added a few things)
~B16A with the Toda stroker kit 1800cc
~[color=red]Toda A intake cam, B exhaust, Toda cam gears
~Toda valve springs, retainers
~ported head
~LSD tranny and I think it has a different final drive, not sure
~Newer exedy clutch OEM replacement pressure plate
~Feels lightweight flywheel
~Baffled oil pan
~OEM ITR intake/throttle body
~hondata gasket
~4-2-1header which I believe is a Spoon header, but it has a slight crack in it. No dings at all. Honest note, probably needs to be replaced soon.
~Spoon N1 axle back, aftermarket B pipe, unsure what it is, cat still there
~engine management CROME
Suspension & Brakes:
~Spoon rear upper and lower bars
~Spoonfront upper s. bar.
~OEM ITR front lower tie bar
~Spoon street struts
~H&R race springs
~ATS brake lines
~Apexi slotted rotors (front)
~Wed Sport pads in the front, OEM in the back(new)
~High temp fluid
~Cusco master cyl brace, needs to be powercoated/painted
~MUGEN RNR wheels with good tires, 65% tread.
Interior:
~Bride Brix II driver seat. Red, graditation material
~DC2 R pass seat, not currently installed but will include with the car. Its on order.
~steering wheel, dont ask. I have a black Nardi or MOMO that will go with it.
~CD player
~decent speakers
Other:
There are a few other things on it like the Spoon wing and PIAAheadlights lights, Mugen side skirts/front lip, safety 21 cage*. Currently the car has the rear seats and spare tire out, I still have these and they will be included with the car.
*the front part of the safety21 cage is not in yet, it will be put it in soon. The dash as to come out for the front part of the cage to be put in.
Condition/details:
The car was mint when i got it. Not a ding in it. Now its got a few car door dings in it. Stupid ***** have no respect for anyone's cars over here. There are some rust spots on it that need to be taken care of, and the roof needs to be re-painted. I don't show it, so its not cleaned up to be. It is a clean car, I love it, could use some new paint though. Runs super strong, though i've never done a compression test on it. (never felt the need to) Only thing wrong engine wise, it has a vac leak somewhere and I can't find it. Only thing wrong with it. (well that and the exhaust rattles) :P
Contact:
email: frankvest@gmail.com
AIM: imadumbassu2
Phone: I can call anyone.
Location: I am in the Marine Corps stationed in Okinawa, Japan.
Price/shipping:
Price is 14,000 OBO in my hand/paypal as it sits $12,000 with a stock B16 or GSR in it OBO I will include a 3 day/long weekend trip to Okinawa from So-Cal, meals and a motel say provided. I will pick you up at the airport, drive you around for the weekend etc. etc.
Shipping
There are several ways to ship it. There is a company here that will ship and legalize your vehicle for $10,000 with a florida plate and about a 8 week turn around time from the time it leaves Okinawa. That would be your best bet, and what I would recommend. Whatever you decide to do is on you. I can help you out though. :thumbup:
Pics will be up shortly
01-30-2007, 10:29 PM
#7
0.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 0
Re: 1994 Honda Civic SiR
there was a dude on HT who sold his car, identical to mine for $13k non-registered. im also paying for a trip here for you to check the car out....you dont wanna do that, knock $2g's off....
and $10,000 for shipping is not my price. Thats a company here. Come up with another way to ship it and by all means...
and $10,000 for shipping is not my price. Thats a company here. Come up with another way to ship it and by all means...
01-30-2007, 10:44 PM
#9
0.0 BAR
Thread Starter
Join Date: Apr 2004
Posts: 0
Re: 1994 Honda Civic SiR
I don't really wanna sell it over here. 
ITR sit on the lots for months on end for $10,000. Id be lucky to get $4000 for my car here. One dude offered me $6000 but he never replied back to me. I told him $6000 with my spare motor(s) and tranny...pretty much all of the parts I have.
if I dont sell it, i wont cry. I love my car. but if someone wants to give me 3x's what I have in it, I will let them have it. If I sell it, i'm getting a CTR or a FD. im just seeing whats out there...
I wonder what it would bring on ebay?
ITR sit on the lots for months on end for $10,000. Id be lucky to get $4000 for my car here. One dude offered me $6000 but he never replied back to me. I told him $6000 with my spare motor(s) and tranny...pretty much all of the parts I have. if I dont sell it, i wont cry. I love my car. but if someone wants to give me 3x's what I have in it, I will let them have it. If I sell it, i'm getting a CTR or a FD. im just seeing whats out there...
I wonder what it would bring on ebay?
