Converting a Mazda BP to Honda ECU?
Guest
Posts: n/a
Converting a Mazda BP to Honda ECU?
I'm considering converting to a honda ecu instead of running megasquirt. Megasquirt just seems like its going to be too much of a pain in the *** and nobody wants to tune it. Does it matter that a BP spins CW and Honda's spin CCW? if i'm thinking correctly, it seems like it would be pretty easy after you adapted the honda distributer.
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: Converting a Mazda BP to Honda ECU?
I have some serious complaints about Megasquirt, but it works great on the Miatas. It should, too, seeing as how a lot of the beta testing for MS is done on Miatas. Soooo, B5, B6, BP... if you aren't looking for big drag car power, say keep it at or under 300 whp, I think it'd be more work to fit the Honda distributor.
Guest
Posts: n/a
Re: Converting a Mazda BP to Honda ECU?
Originally Posted by 92CXyD
Toyotas spins clockwise and a couple of guys on here are making it work with a honda dizzy, sensor, and ecu. So there should not be a problem with a mazda motor then.
Originally Posted by SiFlyBy
Why so scared of megasquirt? It is a pain in the ***, but its a great learning experience. What mazda engine are we talking here anyway?
Originally Posted by Joseph Davis
I have some serious complaints about Megasquirt, but it works great on the Miatas. It should, too, seeing as how a lot of the beta testing for MS is done on Miatas. Soooo, B5, B6, BP... if you aren't looking for big drag car power, say keep it at or under 300 whp, I think it'd be more work to fit the Honda distributor.
1.0 BAR
Joined: Aug 2005
Posts: 339
Re: Converting a Mazda BP to Honda ECU?
From what ive read theirs a few super easy ways to retrofit honda to anything. Make a bracket that mounts the dizzy onto the exhaaust or intake side cam gear. Cut the shaft weld a 12mm socket to it that presses up against the cam nut lol. VOILA honda dizzy, the rest is just wiring. You also get free halfassed ign advance retard lol.
0.0 BAR
Joined: Dec 2005
Posts: 0
From: Casper Wyo.
Re: Converting a Mazda BP to Honda ECU?
Try this link: https://www.homemadeturbo.com/forum/...?topic=97764.0
0.0 BAR
Joined: Feb 2003
Posts: 0
Re: Converting a Mazda BP to Honda ECU?
By the time you adapt the Honda dist, plumb and wire sensors, make a conversion harness to plug in a Honda ECU, etc, you've eclipsed time it takes to solder the ~25 wires a MS needs and exceeded what a MS costs.
MS on a Miata flat out works, and has datalogging that's a ton better than some $1500 standalones.
MS on a Miata flat out works, and has datalogging that's a ton better than some $1500 standalones.
Guest
Posts: n/a
Re: Converting a Mazda BP to Honda ECU?
Originally Posted by Joseph Davis
By the time you adapt the Honda dist, plumb and wire sensors, make a conversion harness to plug in a Honda ECU, etc, you've eclipsed time it takes to solder the ~25 wires a MS needs and exceeded what a MS costs.
MS on a Miata flat out works, and has datalogging that's a ton better than some $1500 standalones.
MS on a Miata flat out works, and has datalogging that's a ton better than some $1500 standalones.
