im trying to use dsm injectors for my setup. i read the write up on boring out the lower seals, i was wondering if the b16 injector clips will work or if i have to use the dsm clips and splice into the exsisting wires?

 

Your clips will work. Just cut out the tab in the dsm's.

 

you dont have to bore the seals either, you can just lube them well and slip them in.

 

what do you mean by cut out the tab?

 

you'll see when you try to install them

 

Myself, I bored them only half the seal since blue top are a bit smaller than stock one.