dsm blue tops on b16
 

im trying to use dsm injectors for my setup. i read the write up on boring out the lower seals, i was wondering if the b16 injector clips will work or if i have to use the dsm clips and splice into the exsisting wires?

Re: dsm blue tops on b16
 

Your clips will work. Just cut out the tab in the dsm's.

Re: dsm blue tops on b16
 

you dont have to bore the seals either, you can just lube them well and slip them in.

Re: dsm blue tops on b16
 

what do you mean by cut out the tab?

Re: dsm blue tops on b16
 

you'll see when you try to install them

Re: dsm blue tops on b16
 

Myself, I bored them only half the seal since blue top are a bit smaller than stock one.