is there some secret to putting this trans case back together. i think the bearings arent sliding in perfectly. PLEASE HELP!!!

 

more info, like what year?

reason it was apart, what was done, where are you having issues.


Oh yeah, pics not loading.

 

well, the diff blew out, its a hydro LS (94 i believe). pulled it apart, to replace diff, and now trying to put it back together. the case slides on all the shift forks (it seems) but is not going all the way down, stops about 1/4 in from closing.

we are doing the snap ring as we lower the case together but still nothing. I think the bearing is not seating correctly in the housing.

 

sorry, i was refering to the large housing bearing.

pics will not really be helpful, since its the bearing you can not see, as you are sliding the 2 parts of the case together.

 

failure to align the tang for reverse synchro

failure to lock midway into 4th gear to align the shaft assembly so it aligns.

OH YEAH, this is covered in the FSM's that are free to download, excellent resource, has taught me alot.

 

thank you bone!!!

 

Mista bone were do i dl this shim im gunna be rebuilding a tranny soon

 

its just the helms manual... search for FSM and there is a link on here somewhere, i found it this morning.

 

figured out what doesn't line up, its not the bearing, its the SHIFT PIECE SHAFT...

 

1/2 way into 4th gear, it'll lock the shaft into place.

TEST FIT the case until you get the hang of it BEFORE using the RTV Ultragrey sealant.