Hybrid/Tech B16 / B18 / ZC / D16 / H22 / Mini-Me Ask your Honda Engine Questions here.

Oil light flashing on and off wtf?

Thread Tools
 
Search this Thread
 
Old May 21, 2008 | 07:41 PM
  #1  
ifly87's Avatar
Thread Starter
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Oil light flashing on and off wtf?

Like the title says, I have a 95 prelude with an h23 in it. only sometimes does it do it but when it does its after the engine has warmed up and at idle it starts flashing. With a oil pressure guage hooked up to it, it shows almolst 45psi of oil pressure at idle when its cool so what gives

edit: I know the flashing oil light means "temporary loss of oil pressure" but why, theres a new sending unit in it still does it.

I've heard of some contacts on the back of the cluster might be bad or some crap?
Old May 21, 2008 | 07:49 PM
  #2  
ghettoturbo's Avatar
1.5 BAR
 
Joined: Feb 2008
Posts: 924
Default Re: Oil light flashing on and off wtf?

Originally Posted by ifly87
With a oil pressure guage hooked up to it, it shows almolst 45psi of oil pressure at idle when its cool so what gives

45 when cold, but what about when it warms up?
Old May 21, 2008 | 07:54 PM
  #3  
ifly87's Avatar
Thread Starter
3.0 BAR
 
Joined: Dec 2005
Posts: 2,081
Default Re: Oil light flashing on and off wtf?

I dont know, but it its fine cold the pump has gotta be fine right? this thing only has 130,000 on it but it was sitting for a while maybe a year or more without being run.
Old May 21, 2008 | 08:22 PM
  #5  
ghettoturbo's Avatar
1.5 BAR
 
Joined: Feb 2008
Posts: 924
Default Re: Oil light flashing on and off wtf?

Originally Posted by ifly87
I dont know, but it its fine cold the pump has gotta be fine right? this thing only has 130,000 on it but it was sitting for a while maybe a year or more without being run.
pump could be fine, bearings could be toast. Or it could all be fucked. Or it could all be fine...but id bet against it if the dummy light has been flashing
Old May 21, 2008 | 10:39 PM
  #6  
rsmith2786's Avatar
1.5 BAR
 
Joined: Aug 2003
Posts: 1,162
Default Re: Oil light flashing on and off wtf?

I dont think a loose connection would do it. Switch is normally closed so any breaks in the wiring couldn't turn the light on. I forgot to connect mine once and the light just never came on even when the engine wasn't running.
Old May 22, 2008 | 12:59 AM
  #7  
ghettoturbo's Avatar
1.5 BAR
 
Joined: Feb 2008
Posts: 924
Default Re: Oil light flashing on and off wtf?

Originally Posted by rsmith2786
I dont think a loose connection would do it. I forgot to connect mine once and the light just never came on even when the engine wasn't running.
ditto
Old May 22, 2008 | 03:06 AM
  #8  
icarusdown's Avatar
0.5 BAR
 
Joined: Sep 2005
Posts: 67
Default Re: Oil light flashing on and off wtf?

normally open

if you've got a fucked up idle, (low/rough idle) the rpm's might be falling low enough that the pump doesn't generate quite enough pressure.

you need a gauge on there so you can check it through it's paces, otherwise it's just a bunch of useless guessing.
Old May 22, 2008 | 07:59 AM
  #9  
t_cel_t's Avatar
!! UNCONFIRMED EMAIL !!
 
Joined: Sep 2007
Posts: 1,305
Default Re: Oil light flashing on and off wtf?

same thing happens in my corolla, i got a new switch but its too much of a bitch to replace it so i said ---- it. i wanted to hook up a gauge but toyota made the treads in the oil pressure switch hole to be 3/8'' british nominal pipe threat, i spent forever looking for it and i finally called the stealership and they said they just put in a new oil pressure switch and monitor it from there.
Old May 22, 2008 | 01:10 PM
  #10  
turbo dave's Avatar
1.0 BAR
 
Joined: Jul 2007
Posts: 378
Default Re: Oil light flashing on and off wtf?

Originally Posted by t_cel_t
same thing happens in my corolla, i got a new switch but its too much of a bitch to replace it so i said ---- it. i wanted to hook up a gauge but toyota made the treads in the oil pressure switch hole to be 3/8'' british nominal pipe threat, i spent forever looking for it and i finally called the stealership and they said they just put in a new oil pressure switch and monitor it from there.
yeah i would say that too. also check your oilpan see if its dented this caused that on mine, also if your oil is too thin for some reason. i got water in my oil from the breather on the VC and then vtec wouldn't engage and the light flashed.

don't ignore it though.



All times are GMT -5. The time now is 06:16 AM.